Sound Treatment Package for 2021-2026 Ford F-150 & 2023-2026 Super Duty SuperCrew – Block Off Plates, Blackhole MAT & Tiles
Block off plates, Blackhole MAT and Blackhole Tiles for all four doors and the back wall.
SKU: ST-SCREW-21-lvl3
The rest of the route, in one cart.
One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.
Finish your bass, in one cart.
The other parts of the Fix the Bass route that fit your truck. Open any of them to choose its options and add it to your cart without leaving this page.
The rest of the system, in one cart.
The other parts of a full system that fit your truck. Open any of them to choose its options and add it to your cart without leaving this page.
Mounting amplifiers, a processor and distribution behind the driver-side rear seat: it bolts to three factory points, with no drilling.
Owners who need one compact amp or a DSP on the driver side without taking up the whole area behind the rear seat.
Owners running a 5-channel amp or micro amplifiers who want a clean, secure mount behind the rear seat.
Mounting a compact amplifier or processor behind the passenger-side rear seat, with no drilling and the factory subwoofer left in place.
2015-2026 Ford F-150 and Super Duty SuperCrew owners who want a hidden, clean amp install in the underseat storage area. Not for trucks with Pro Power Onboard.
For owners who need the whole back wall: 53.8 inches for several amplifiers, with room behind for distribution blocks, relays or a DSP.
20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.
Owners of Ford, Lincoln, Mazda, and Mercury vehicles with factory 6x8-inch oval speakers upgrading to 6.5-inch round aftermarket drivers
Ford truck owners upgrading factory speakers to premium aftermarket 6.5-inch, 6x9-inch, or 8-inch drivers
Add a sub amp to Ford B&O — fix the bass roll-off with a pre-set KEYLOC, or keep it and save.
A pair of factory 2-pin plug pigtails with bare OFC copper leads. Plug-and-crimp aftermarket speaker install with zero factory wire cuts.
Takes the place of the rear B&O amp and hands your amplifiers six clean analog channels.
Plug-in T-harness for 2021+ Ford non-amplified factory stereos. Hand-built in Nashville with OFC copper, soldered 4-channel Straight Wire RCA tips, and fully reversible installation.
Plug-in T-harness for 2015-2020 Ford F-Series and other pre-2021 non-amplified Fords. Hand-built in Nashville with OFC copper, soldered 4-channel Straight Wire RCA tips, and fully reversible installation.
SGS-built plug-in harness that connects a Kicker KEYLOC module to your Ford B&O factory amp output. Pick the variant that matches your factory subwoofer shape — YMM will auto-select if your vehicle is in our database.
A pair of OFC copper pigtails with Ford's small BLACK tweeter / mid-range factory connector. Check your own plug color before ordering — black = this product, gray = different SKU.
Plug-in dash-side harness that gives you access to the speaker wires running to the factory rear-door speakers on 2021-2023 F-150 B&O Unleashed trucks. Connect your amp output at the dash instead of splicing door wires.
Zero-splice install harness — clean, reversible wiring with no cut factory connectors.
2025+ Ford A²B stereo interface — now works on all Broncos (including non-B&O). Burr-Brown DAC up to 192 kHz. Same engine as the ZEN-A2B Plus.
F-150 and Super Duty owners installing aftermarket tweeters from a 2-way or 3-way component speaker kit
2021+ Ford truck owners with the non-amplified audio system installing aftermarket tweeters
2021+ Ford F-150, Lightning, and Super Duty owners with B&O audio upgrading factory midrange speakers
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.
Kicker's own carpeted truck box with two 10-inch L7T subs installed, made to sit under the rear seat.
Two 6.5-inch subs in a ported box behind the rear seat — for your own amp, and the seat still folds up.
Genuine JL Audio Stealthbox: two 12-inch TW3 subs in a sealed box that bolts in under the rear seat.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat. Bring your own amp.
Custom-fit subwoofer enclosure for the Ford F-Series (2009–2026) — tight, hidden bass built around your Arc Audio.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.
Kicker's own carpeted truck box with two 10-inch L7T subs installed, made to sit under the rear seat.
Two 6.5-inch subs in a ported box behind the rear seat — for your own amp, and the seat still folds up.
Genuine JL Audio Stealthbox: two 12-inch TW3 subs in a sealed box that bolts in under the rear seat.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat. Bring your own amp.
Custom-fit subwoofer enclosure for the Ford F-Series (2009–2026) — tight, hidden bass built around your Arc Audio.
JL Audio RD1500/1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Kicker CXA1200.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Kicker CXA1200.1 sub amp rack, pre-wired and pre-tuned in-house, with the plug-in interface for B&O, Sony or base factory audio.
JL Audio RD1000/1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
JL Audio subwoofer-and-amp rack for Ford F-Series — bolt-in 1500W RMS, fits factory systems with no fabrication.
JL Audio RD1000/1 pre-wired on our rack. Plugs into your factory audio; you add the subwoofer.
Arc Audio X2 1100.1 sub amp, pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Kicker subwoofer-and-amp rack for Ford F-Series — bolt-in, fits factory systems with no fabrication.
Kicker subwoofer-and-amp rack for Ford F-Series — bolt-in, fits factory systems with no fabrication.
Arc Audio X2 1100.1 mounted, pre-wired and pre-tuned on our rack. Plugs into your factory audio; you add the subwoofer.
Kicker CXA1800.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Kicker CXA1800.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Mosconi-Gladen subwoofer-and-amp rack for Super Duty & F-150 — bolt-in 1200W RMS, fits factory systems with no fabrication.
Mosconi-Gladen subwoofer-and-amp rack for Super Duty & F-150 — bolt-in 975W RMS, fits factory systems with no fabrication.
Mosconi-Gladen subwoofer-and-amp rack for Ford F-Series — bolt-in 975W RMS, fits factory systems with no fabrication.
Mosconi-Gladen subwoofer-and-amp rack for Ford F-Series — bolt-in 1200W RMS, fits factory systems with no fabrication.
Focal Utopia M beryllium tweeters, 3.5WM midranges and 8WM mid-bass, in A-pillars and door adapters we build for your truck.
Focal Utopia M beryllium tweeters, 3.5WM midranges and 8WM mid-bass, in A-pillars and door adapters we build for your truck.
JL Audio speaker upgrade for F-150 & Super Duty (2015-2020) — crisp highs and full mids with a true plug-and-play install.
JL Audio speaker upgrade for F-150 & Super Duty — crisp highs and full mids with a true plug-and-play install.
Gladen-Mosconi PRO 25mm tweeters, 3-inch mid-ranges and 6.5-inch mid-bass, in A-pillars and door adapters we build for your truck.
Gladen-Mosconi speaker upgrade for F-150 & Super Duty — crisp highs and full mids with a true plug-and-play install.
Focal K2 speaker upgrade for F-150 & Super Duty — crisp highs and full mids with a true plug-and-play install.
Focal K2 speaker upgrade for F-150 & Super Duty (2015-2020) — crisp highs and full mids with a true plug-and-play install.
Focal Flax EVO speaker upgrade for F-150 & Super Duty — crisp highs and full mids with a true plug-and-play install.
Focal Flax EVO speaker upgrade for F-150 & Super Duty (2015-2020) — crisp highs and full mids with a true plug-and-play install.
Focal Flax EVO speaker upgrade for F-150 & Super Duty (2015-2026) — crisp highs and full mids with a true plug-and-play install.
Focal speaker upgrade for F-150 & Super Duty (2015-2024) — crisp highs and full mids with a true plug-and-play install.
Gladen-Mosconi speaker upgrade for F-150 & Super Duty (2015-2026) — crisp highs and full mids with a true plug-and-play install.
JL Audio C1 components and coaxials on our HDPE door adapters — plug-in harnesses, runs on factory power.
Kicker KS components and coaxials on our HDPE door adapters — plug-in harnesses, no amplifier required.
JL Audio speaker upgrade for F-150 & Super Duty (2015-2026) — crisp highs and full mids with a true plug-and-play install.
JL Audio full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
JL Audio full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
JL Audio full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
JL Audio full-range amp rack for Ford F-Series — bolt-in, powers your full system with a factory-clean install.
Kicker full-range amp rack for Ford F-Series — bolt-in, powers your full system with a factory-clean install.
Kicker full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.
Kicker's own carpeted truck box with two 10-inch L7T subs installed, made to sit under the rear seat.
Two 6.5-inch subs in a ported box behind the rear seat — for your own amp, and the seat still folds up.
Genuine JL Audio Stealthbox: two 12-inch TW3 subs in a sealed box that bolts in under the rear seat.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat. Bring your own amp.
Custom-fit subwoofer enclosure for the Ford F-Series (2009–2026) — tight, hidden bass built around your Arc Audio.
Get it as part of a package
This package ships with this part.
Plug & Play Packages
Behind-the-Seat Focal Elite K2 Power 9-ChannelFocal 9-channel behind-the-seat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Behind-the-Seat Focal Flax EVO Series 7-ChannelFocal Flax EVO 7-channel behind-the-seat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Behind-the-Seat Focal Flax EVO Series 9-ChannelFocal Flax EVO 9-channel behind-the-seat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Behind-the-Seat Focal Utopia M Series 9-ChannelFocal Utopia 9-channel behind-the-seat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Behind-the-Seat Gladen-Mosconi PRO Series 9-ChannelGladen-Mosconi 9-channel behind-the-seat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Behind-the-Seat JL Audio VXi Series 5-ChannelJL Audio 5-channel behind-the-seat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Behind-the-Seat Mosconi-Gladen Audio RS 7-ChannelMosconi-Gladen 7-channel behind-the-seat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Behind-the-Seat Mosconi-Gladen Audio RS Series 5-ChannelMosconi-Gladen 5-channel behind-the-seat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Underseat "Audiophile" Focal Utopia 10-ChannelAudiophile-grade Focal Utopia 10-channel underseat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Underseat Focal Flax EVO 7-ChannelFocal Flax EVO 7-channel underseat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Underseat Focal Flax EVO 9-ChannelFocal Flax EVO 9-channel underseat system — full plug-and-play sound built for your truck.See the package →
Plug & Play Packages
Underseat Focal K2 Power 9-ChannelFocal K2 9-channel underseat system — full plug-and-play sound built for your truck.See the package →
The details.
Three parts, each with its own job. The block off plates close the big access hole in each door's inner skin, where the factory weather barrier was. Blackhole MAT damps the sheet metal, the plastic door panels and the back wall so they stop vibrating and buzzing. Blackhole Tiles absorb sound inside the door, starting right behind the speaker.
Every level has the same plates and enough MAT for the back wall. The levels trade MAT for tiles: Level 1 has the most MAT and 18 tiles; Level 3 has 144 tiles — 36 in every door — and less MAT, because the tiles take over the outer skin.
Check before you buy
Select your truck at the top of the page to confirm the fit before you order. Not sure which system you have? Ask us before you buy.
Full specifications
- Coverage Area
- Doors + wall
- Pre-cut Plates
- USA-made HDPE
- Plate Mounting
- 1/8-in holes
- MAT Brand
- Blackhole
- MAT Size
- 4.5 mm thick
- Tile Size
- 4 x 3 x 1.5"
- Factory Audio
- Any system
- Sold As
- 1 truck kit
Kits for other platforms.
Sound Treatment Package for 2015-2020 Ford F-150 & 2017-2022 Super Duty SuperCrew – Block Off Plates, Blackhole MAT & Tiles
Truck owners upgrading their speakers or quieting their doors and back wall.
75 reviews
Sound Treatment Packages for the 2015-2020 F-150 and 2017-2022 SuperDuty Ford SuperCab Trucks
Truck owners upgrading speakers or reducing road noise in 2015-2020 F-150 and 2017-2022 Super Duty SuperCab trucks.
126 reviews
Everything customers actually ask.
The questions we get most on sound treatment - answered straight. Not sure if yours is here? Call, and a human answers.
One year, on everything we sell. Every item is covered for one year from delivery. If something fails in that first year, we make it right. Questions about a claim? Call us — a real person handles it with you.
Every panel, step by step. No cutting.
Every kit ships ready to install at home. Follow the steps for your platform - the MAT, tiles, and plates go in with basic hand tools and a drill for the plate pilot holes.
-
Pry off the small trim covers and remove the 7 mm screws behind them (front door 7, rear door 5). Pull the door panel from the bottom and lift it off; unclip the lock and handle cables and unplug the connectors.
-
Remove the factory weather barrier and any white sound-deadening material over the access hole - the block off plate replaces them - and the speaker (front 4 x 7 mm screws, rear 3).
-
Clean every flat surface that will get material with wax and grease remover or alcohol.
-
Stick the Blackhole Tiles to the bare metal of the outer door skin, behind the speaker first. Flat surfaces only, about 1/8-1/4 inch between tiles so water can drain, and never cut a tile.
-
Where you have no tiles, cover the rest of the outer skin with Blackhole MAT.
-
Unclip the module and the wiring from the inner skin and push them through the hole - mind the sharp edge.
-
Line the block off plate up on its alignment holes, drill a 1/8-inch hole at each end, and leave two plate screws in as markers.
-
Cut MAT to fit the inner skin, press it on from the center and roll it. Keep the panel clips, bolts and panel screw holes clear; cut out the speaker, plate, wiring and handle openings.
-
Take out the marker screws, set the plate, drill the remaining 1/8-inch holes - inner skin only - and screw the plate on.
-
Refit the module and wiring, then the speaker. Aftermarket speakers get a foam ring.
-
Cover the flat areas on the back of the plastic door panel with MAT - save your offcuts for this.
-
Refit the door panel: lock cable routed above the door pocket, wires routed up and away from the speaker; check every clip lines up, then the screws and covers. Repeat on each door.
-
Back wall: take off the carpet panel, clean the big flat area, cover it with MAT (about one box) and refit the panel.
How they hold up once they're installed.
First of all, you call, you get a real person to talk to and Sage was great!
Ford did service on my truck in 2018 and forgot to put a few things back in my door, a couple of main bolts and the water/vapor barrier. Needless to say when my speakers blew, I took the doors panels off to put new JL Audio speakers in, I had a huge hole. Ford was making it right and said they would pay for bolts and barrier but could not source a new barrier and told me I was out of luck. I searched for alternatives and found the F150 door blockers.
The products are very well made and an easy install! I would highly recommend any F150 owners to scrap the crappy water barriers and upgrade to the sounds good stereo door blockers!
I did full sound treatment to the doors as they do in thier install videos and what a difference! Road noise is down and speakers are nice and sealed for outstanding mid bass accompanied by a Single JL Audio 10” Subwoofer.
Could not be happier!!!! Do yourself a favor and check out the door blockers and all the other innovative products they offer.
Thank you all again for great solutions, well made products and outstanding customer service.
Nick Bowers
Pasco County Fire Rescue
I am impressed with the quality and the effect of these block off plates. Shipped fast and well packaged; tins for the screws are a nice touch to help you during install. Supporting videos to show you how it’s done! I really wanted to do a A and B comparison so I added the door treatment and SGS block off plates and reinstalled the OEM Sony 6 x 9’s. Night and day difference. Without the plates they would add color the louder they got; with them they sound great. Will get these for next truck no doubt.
Real easy and quick install. Tight fitment with screws supplied allowing for tight and solid stable placement. Did add some sound deadening lining to inner side.
Overall solid plate which helps with trying to maximize sound proofing. Which is better than the thin plastic shield on door. Am content and recommend use.
Fit, finish, design and even the packaging is top notch. If I could give ten stars I would.
The process to properly sound treat the doors is a little mundane but the end result is worth the little work. The midrange and bass is more audible
I purchased the door block off plates because the plastic liner on my Ford F-250 was not sealed and water was coming through. The plates are solid, but not heavy. They fit perfectly and seal the large door hole quite well to prevent water from entering into the cab and soaking the carpet. Easy installation with metal screws. Screw spacing is adequate for a solid mount, but I would have liked a little tighter spacing along the bottom for water seal purposes. I recommended these for my coworkers suffering from the water leak problem on their Ford trucks as well.
The block off plates are incredible! Definitely noticed the difference they make. On top of the great product, I called the business with a couple questions and they were the most down to earth and nicest people! Would order from SGS again!
I purchased an amp rack and block off plates for my truck and was VERY pleased with how well each item was made. The amp rack comes with all the hardware required for assembly. The block off plates are a must have for sound reduction. SGS's plates are well made and come with the screws required for a perfect install.
No brainer. Got the insulating material from a different vendor because I had store credit. However once I installed the silless and added the panels (also added silless to the inside of the panels). Installation was easy. Used a drill to start the hole and then put the screws in and it was fine. Be aware of when removing the door latch cable. I had a brain fart and forgot that I watched the instructions and broke it off. Once I realized how easy it was to clip and pull it out of the door I felt like an imbecile.
Also ordered the speaker adapters and let me tell you don’t even think of going cheap with the other stuff online. You want this.
Installed the Block-Off Plates in a 2017 F-150. The material is super sturdy, with a nice design (even though it won’t be seen). Easy to install with extra screws provided. Highly recommended item for a top-notch sound treatment!
I really like these block-off plates. I installed them in my front doors and plan to do the rear doors, soon. The plate alignment was a little awkward for me due to the way the front-most plate's lip corner fits with respect to the (recessed) door opening/cutout (plate kinda bent outward slightly instead of sitting flush in), but not a big deal. The included screws worked great (I was somewhat skeptical whether they were the right type prior to installing them). The only real question I had during the install was whether or not I needed to pre-drill holes in the plates...but, after finding and searching SGS's video, I found that pre-drilling wasn't necessary. Overall, very pleased with this purchase. Glad to see SGS's presence on F-150 forum, as well, which is where I first heard about these!
Super easy install, sealed the doors up nicely. Helped with road noise and bass response.
Love these! No more awkward thoughts of should I leave an open hole or glue the crappy plastic back on. These complete the install and look amazing! Not just crappy plastic either, these are thick, dense and fit perfectly!
I purchased the amp rack for the f150 and whil talking to Don, he recommended doing sound deadening, specifically the door block off panels to improve the mid-bass in my truck. The panels as well as the sound deadening(I went with another brand) made a big difference. I highly recommend doing this to your truck if you have any kind of power running your speakers. System sounds even better. Thank you Don. They install in about 10 min (each door) or as fast as you can drill and put all the screws in.
Not sure what'll fit? Just call.
Tell us your vehicle and what you're chasing - road noise, rattles, or both - and we'll confirm the right kit before you order.







































































