Loaded Amp RackFrom $1,880
Choose options · $1,880
Gladen amp rack for 2023+ Ford Super Duty and 2024+ F-150 with fuse blocks, braided wiring and harnesses

Mosconi-Gladen Loaded Subwoofer 1200wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks

5.0 · 22 reviews
1,120 W RMS @ 1 ohmPre-tuned in-houseFixes B&O bass roll-offPlug-in harnessMosconi remote sub control

Mosconi-Gladen subwoofer-and-amp rack for Super Duty & F-150 — bolt-in 1200W RMS, fits factory systems with no fabrication.

From $1,880
Shipping calculated at checkout
Choose your options Required
Choose your options
Your selection includes
  • Mosconi-Gladen RC1200C1 mono amplifier, mounted and wired on the rack
  • Ten87 Design driver-side amp rack, 1/2-inch solid-core HDPE
  • Distribution blocks and relay, on the rack
  • Sub amp rack harness
  • Plug-in T-harness for the factory B&O amplifier (B&O trucks)
  • Subwoofer block-off plate and screws (B&O trucks)
  • Dash plug, extension harness and junction (trucks without B&O)
  • Mosconi-Gladen RTC-2 remote sub control
  • 1-meter 2-channel balanced RCA cable
  • 4-gauge OFC copper power and ground wire
  • Inline 150 A fuse for the power wire
  • 2 watertight cable glands for the floor holes
  • Subwoofer lead with quick-disconnect plug
  • 2 metal floor brackets, M8 bolts and spacers
  • Pry bar and bass-knob template
  • Cable ties and tie mounts
Top questions 8 answered
See all 8 questions
Questions? Text us at 615-610-1413
Fits your vehicle In-house support
The rack · Performance tier

How it performs. In your truck.

Our score for this rack, and how it rates on the four things we judge every amplifier rack on.

Tier
Performance
Amplifier power
1120 W RMS
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Four things we rate

Hover or tap a measure
Loaded subwoofer amplifier rack

The details.

Upgrade your driving experience with the Mosconi-Gladen Loaded Subwoofer 1200wrms Amplifier Rack. This powerful rack is compatible with all factory systems, including the B&O Unleashed, and delivers impressive 1200wrms amplifier performance. Experience deep bass and exceptional sound quality while you drive.

The Mosconi-Gladen RC1200 1200wrms Loaded Subwoofer Rack "Ingredients":

Electronics:
 - Mosconi-Gladen RC1200 1200wrms Mono-Block Amplifier
 - Mosconi-Gladen Subwoofer Remote Level Control

Custom Made In-House Components:
 - Ten87 Design Custom Made Amplifier Rack
 - Vehicle Specific Plug and Play T-Harness
 - Full-length Power + Ground 4ga OFC Copper Wiring Kit
 - Subwoofer harness with quick disconnect connectors
 - Subwoofer block-off plate (B&O trucks)

Additional Touches:
 - Pre-tuned and Tested In-House by the Sounds Good Stereo Team
 - Over-packaged to ensure safe arrival

Full specifications

Amplifier System
RC1200C1
RMS Power Output
1,120 W RMS
2-Ohm Output
650 W RMS
Integration
Kicker KEYLOC
Pre-Tuned Signal
Yes
Power Wire
4 AWG OFC
Mounting Location
Driver side
Factory Audio
B&O or base
Loaded racks for your vehicle

Compare loaded subwoofer racks.

Common questions

Everything customers actually ask.

The questions we get most on loaded amplifier racks - answered straight. Not sure if yours is here? Call, and a human answers.

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Step by step for your vehicle.

Where install steps exist for your exact part, they're below - with the tools you'll need.

DifficultyModerateTime~4 hr
Written steps
  1. Fold down the rear seat backs; the seats do not need to come out.

  2. On B&O trucks, take the factory subwoofer out from behind the driver-side seat.

  3. Find the floor threads for the feet (they can be under the carpet and a square of tape), screw the feet into the slots for your truck from the mounting feet chart, and bolt the rack down with a spacer under each foot.

  4. Bolt the top bracket to the seat-latch bracket, in front of it.

  5. On B&O trucks, screw the block-off plate over the factory subwoofer opening, cork side toward the hole.

  6. On B&O trucks, find the factory amplifier behind the carpet panel on the back wall toward the passenger side, unplug it and plug the T-harness in between.

  7. On trucks without B&O, plug the dash harness in at the radio and run the extension harness back to the rack along the driver side.

  8. Run power and ground from the battery down to the frame rail, back along it, and into the cab through two 3/4-inch floor holes sealed with the included glands.

  9. Connect the ground at the battery and the power wire with its inline fuse.

  10. Connect power and ground to the distribution blocks on the rack and plug in the subwoofer lead.

  11. Run the Mosconi remote sub control cable forward if you want the control within reach, test the system, then fold the seat backs up.

Owner reviews - real installs

How they hold up once they're installed.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and factory system - we'll confirm the right loaded rack before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
From $1,880Loaded Subwoofer Amp Rack
Choose options