Loaded Amp Rack$2,760
Arc Audio loaded amplifier rack with Ten87 Design panel, harnesses and power wiring for 2019+ GMC and Chevy BOSE trucks

Arc Audio Loaded Subwoofer 2500wrms Amplifier Rack for 2019+ GMC/Chevy BOSE Trucks

5.0 · 22 reviews
2,500 W RMS @ 1 ohmPlugs into the Bose ampBolts to factory studsPre-tuned in-houseRemote level knob

Arc Audio subwoofer-and-amp rack — bolt-in 2500W RMS, fits factory systems with no fabrication.

$2,760
Shipping calculated at checkout
What's included
  • Arc Audio X2 Series 2500W RMS Mono-Block Amplifier
  • Arc Audio Subwoofer Remote Level Control
  • Ten87 Design Custom Made Amplifier Rack
  • Bose Plug and Play T-Harness
  • Full-Length Power + Ground 1/0ga OFC Copper Wiring Kit
  • Subwoofer Harness with Quick Disconnect Connectors
or
Top questions 9 answered
See all 9 questions
Questions? Text us at 615-610-1413

SKU: PP-Loaded-Arc-GMC-2500

Fits your vehicle In-house support
The rack · Performance tier

How it performs. In your truck.

Our score for this rack, and how it rates on the four things we judge every amplifier rack on.

Tier
Performance
Amplifier power
2500 W RMS
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Four things we rate

Hover or tap a measure
Loaded subwoofer amplifier rack

The details.

Add serious, factory-integrated bass to your truck's factory Bose system without cutting a single factory wire. This loaded amplifier rack pairs the Arc Audio X2 Series mono-block amplifier — 2500 watts RMS at 1 ohm — with a Bose plug-and-play T-harness, a subwoofer remote level control, and a full-length 1/0ga OFC copper wiring kit, all pre-wired and pre-tuned in-house by the Sounds Good Stereo team. Designed to drive your own subwoofers and enclosure, it simplifies the most technical part of your upgrade; select your truck at the top of the page to confirm the fit.

Full specifications

Amplifier System
Arc X2 2500.1
RMS Power Output
2,500 W RMS
2-Ohm Output
1,500 W RMS
Factory Audio
Bose only
Factory Plug
T-harness
Pre-Tuned Signal
Yes
Power Wire
1/0 ga copper
Mounting
OEM studs
Loaded racks for your vehicle

Compare loaded subwoofer racks.

Common questions

Everything customers actually ask.

The questions we get most on loaded amplifier racks - answered straight. Not sure if yours is here? Call, and a human answers.

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Step by step for your vehicle.

Where install steps exist for your exact part, they're below - with the tools you'll need.

Install walkthrough video — Arc Audio Loaded Subwoofer 2500wrms Amplifier Rack for 2019+ GMC/Chevy BOSE Trucks
Full walkthrough
How to Install a Loaded Subwoofer & Amp Rack | GMC Sierra / Chevy Silverado | Ten87 DesignInstall walkthrough.
Written steps
  1. Remove the three rear headrests and the six headrest retainers.

  2. Remove the four 10 mm bolts at the bottom of the seat back, release the three latches at the top with a hook tool, and lift the seat back out.

  3. Take the inverter and the parking-sensor module off the rear wall (10 mm nuts); they can stay plugged in.

  4. Slide the rack onto the factory studs, then mount the inverter and module back on top of it with the factory nuts.

  5. Unplug the top connector on the factory Bose amp and plug the T-harness in between.

  6. Mount the included MEGA fuse holder near the battery and run the power wire from the positive side through its 250 A fuse; connect the ground wire to the negative terminal.

  7. Route both wires to the back of the cab and bring them in through two holes in the floor on the passenger side, sealed with the two 1/0-gauge glands in the kit.

  8. Connect power and ground at the amp, plug in the subwoofer lead, and plug in the LED-light lead if your enclosure has LED lights.

  9. Mount the remote level knob up front (most owners put it below the steering column) and run its cable to the rack.

  10. Test the system before the seat goes back in, trim the seat-back foam where it touches the amp if needed, then reinstall the seat back.

Owner reviews - real installs

How they hold up once they're installed.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and factory system - we'll confirm the right loaded rack before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
$2,760Loaded Subwoofer Amp Rack