Ford F-150 & Super Duty SuperCab Block Off Plates (2015-2022)
Seal your factory door access holes to reduce road noise and tighten mid-bass - works with factory or aftermarket speakers.
SKU: FordBP-Front-Rear-SCAB1
How can we help finish your build?
Tell us where you are in the build and a builder will help you get the rest of your system dialed in. Your comes along automatically.
Seal the factory opening.
CNC-machined HDPE block off plates designed to seal the factory speaker access holes in your truck's doors. Whether you are running factory speakers or aftermarket upgrades, the original access holes in the inner door skin allow bass energy to leak and road noise to enter the cabin. Each plate includes pre-marked alignment circles for easy positioning, then mounts with 1/8-inch drilled holes to create a semi-sealed door chamber for tighter bass response and reduced cabin noise.
Check before you buy
Fits 2015-2020 Ford F-150 SuperCab (SCAB) and 2017-2022 Super Duty SuperCab (F-250/F-350). Does not fit SuperCrew or Regular Cab - see our separate SuperCrew listing. Ford, F-150, Super Duty, SuperCab, and SuperCrew are registered trademarks of Ford Motor Company. Used for compatibility reference only. Not sure which system you have? Ask us before you buy.
Full specifications
- Material Thickness
- 1/4-inch
- Mounting Method
- Pre-marked alignment circles - drill 1/8-inch mounting holes
The rest of the route, in one cart.
One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.
Mounting amplifiers, a processor and distribution behind the driver-side rear seat: it bolts to three factory points, with no drilling.
Owners who need one compact amp or a DSP on the driver side without taking up the whole area behind the rear seat.
Owners running a 5-channel amp or micro amplifiers who want a clean, secure mount behind the rear seat.
Mounting a compact amplifier or processor behind the passenger-side rear seat, with no drilling and the factory subwoofer left in place.
2015-2026 Ford F-150 and Super Duty SuperCrew owners who want a hidden, clean amp install in the underseat storage area. Not for trucks with Pro Power Onboard.
For owners who need the whole back wall: 53.8 inches for several amplifiers, with room behind for distribution blocks, relays or a DSP.
20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.
Owners of Ford, Lincoln, Mazda, and Mercury vehicles with factory 6x8-inch oval speakers upgrading to 6.5-inch round aftermarket drivers
Ford truck owners upgrading factory speakers to premium aftermarket 6.5-inch, 6x9-inch, or 8-inch drivers
Add a sub amp to Ford B&O — fix the bass roll-off with a pre-set KEYLOC, or keep it and save.
A pair of factory 2-pin plug pigtails with bare OFC copper leads. Plug-and-crimp aftermarket speaker install with zero factory wire cuts.
Takes the place of the rear B&O amp and hands your amplifiers six clean analog channels.
Plug-in T-harness for 2021+ Ford non-amplified factory stereos. Hand-built in Nashville with OFC copper, soldered 4-channel Straight Wire RCA tips, and fully reversible installation.
Plug-in T-harness for 2015-2020 Ford F-Series and other pre-2021 non-amplified Fords. Hand-built in Nashville with OFC copper, soldered 4-channel Straight Wire RCA tips, and fully reversible installation.
SGS-built plug-in harness that connects a Kicker KEYLOC module to your Ford B&O factory amp output. Pick the variant that matches your factory subwoofer shape — YMM will auto-select if your vehicle is in our database.
A pair of OFC copper pigtails with Ford's small BLACK tweeter / mid-range factory connector. Check your own plug color before ordering — black = this product, gray = different SKU.
Plug-in dash-side harness that gives you access to the speaker wires running to the factory rear-door speakers on 2021-2023 F-150 B&O Unleashed trucks. Connect your amp output at the dash instead of splicing door wires.
Zero-splice install harness — clean, reversible wiring with no cut factory connectors.
2025+ Ford A²B stereo interface — now works on all Broncos (including non-B&O). Burr-Brown DAC up to 192 kHz. Same engine as the ZEN-A2B Plus.
F-150 and Super Duty owners installing aftermarket tweeters from a 2-way or 3-way component speaker kit
2021+ Ford truck owners with the non-amplified audio system installing aftermarket tweeters
2021+ Ford F-150, Lightning, and Super Duty owners with B&O audio upgrading factory midrange speakers
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.
Kicker's own carpeted truck box with two 10-inch L7T subs installed, made to sit under the rear seat.
Two 6.5-inch subs in a ported box behind the rear seat — for your own amp, and the seat still folds up.
Genuine JL Audio Stealthbox: two 12-inch TW3 subs in a sealed box that bolts in under the rear seat.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat. Bring your own amp.
Custom-fit subwoofer enclosure for the Ford F-Series (2009–2026) — tight, hidden bass built around your Arc Audio.
Not all plates are built the same.
A block-off plate lives in your doors and cab walls through heat, cold, and constant vibration — and it gets drilled and bolted in place. Most competitors reach for metal, ABS, expanded PVC, or expanded HDPE; wood is the common DIY shortcut. Here's how each actually behaves where it counts.
| Material | Easy to work with | Holds real weight | Low material cost | Shrugs off moisture |
|---|---|---|---|---|
material sample
What SGS uses
Solid Core USA-Made HDPE
Dense, Non-Porous and Forgiving
| Strong | Strong | High cost | Strong |
material sample
Competitor materialMetal
Heavy, resonates, hard to cut
| Fails | Strong | High cost | Strong |
material sample
Competitor materialExpanded HDPE
Hollow core, weak at bolt holes
| Strong | Fails | Low cost | Fails |
material sample
Competitor materialABS
Rigid but thin and brittle
| Strong | Fails | Low cost | Fails |
material sample
Competitor materialExpanded PVC
Often foamed, brittle when cold
| Strong | Fails | Low cost | Fails |
material sample
DIY build shortcutWood / Plywood
Absorbs moisture, swells, rots
| Strong | Strong | Low cost | Fails |
Built in-house, start to finish.
Every plate is designed, machined, and finished under one roof in Mount Juliet, Tennessee. No outsourcing, no imported blanks — just USA-made HDPE, a CNC machine, and people who care whether it fits right. Here's how a flat sheet becomes a set of plates cut for your platform.
Video · From the shop floor
Solid Core USA-Made HDPE
It starts with a sheet of 100% USA-made HDPE — solid all the way through, the same material trusted in marine and industrial builds. No hollow cores.
Precision CNC Machining
Each set of plates is nested from our own CAD files and cut on our CNC machine. Feeds and speeds are dialed in for HDPE so every edge comes off clean and every alignment mark lands exactly where it should.
Hand-Finished & Inspected
Every plate is deburred and inspected by hand before it's packed. If it wouldn't go in our own truck, it doesn't ship.
Packed to Survive Shipping
Every set is wrapped, boxed, and packed by the same hands that made it — with the mounting screws bagged and the installation guide included, so nothing arrives loose, scratched, or missing.
Everything customers actually ask.
The questions we get most on block-off plates — answered straight. Not sure if yours is here? Call, and a human will answer.
One year, on everything we sell. Every item is covered for one year from delivery. If something fails in that first year, we make it right. Questions about a claim? Call us — a real person handles it with you.
Line it up, drill it, bolt it in. Pre-marked for you.
Every set ships ready to install at home. The plates carry pre-marked alignment circles — follow the steps for your exact vehicle and grab the tools listed. Stuck? A real tech is one call away.
-
Remove door panel trim and fasteners
-
Disconnect door handle and window switch connectors
-
Remove door panel from clips
-
Locate factory speaker access holes in inner door skin
-
Clean the mounting area with isopropyl alcohol
-
Use the pre-marked alignment circles to center the plate over the access hole
-
Verify no wiring harnesses or lock rods are behind your drill location
-
Drill 1/8-inch mounting holes through the inner door skin only - do not penetrate the outer panel
-
Secure plate with included zinc coated screws - tighten until snug, do not overtighten
-
Repeat for remaining doors
-
Reinstall door panels, reconnect all connectors, and verify window and lock operation
How they hold up once they're installed.
Quality plates! Had a easy experience with installing these on my GMC. Seems to make a big difference in sound and they look great! Thank you for a great experience and I'll be ordering more products soon.
Found these for my 2023 F350 Lariat B&O unleashed system. Following the installation video with flawless fit. I don't think I could have achieved sucess without the video. Shipping and customer service (I did have to contact them) was superb, couldn't be better. After installation, I could clearly hear the improvement to my stock system. I now get to crank it up for Boston and U2 songs.
I’ve had a great experience with Sounds Good Stereo. I purchased their custom enclosure loaded with four JL Audio 8W3s, the power upgrade, sound treatment kit, and their pre-tuned amp rack. I’m extremely happy with the quality of everything and the customer service I’ve received throughout the process.
What really stands out to me is the workmanship and attention to detail. You can tell these guys genuinely have a passion for what they do and take pride in their work. Everything I’ve received has exceeded my expectations. Definitely recommend Sounds Good Stereo!
I ordered these along with the jl audio c1 kit for the front and rear. I only wanted to take the door panels off once so I went ahead and bought these block off plates..they essentially turn your door into an enclosed speaker box and gives you more bass. Also makes your doors feel more solid. Glad I purchased and installed these, I feel they bring out the best of the jl audio c1 kit!
Great way to seal the door enclosures for better sound vs the plastic film installed from factory. The F150 doors sheet metal are not perfectly flat/flush to match the block off plates in certain corners. I used more sound deadening to make a flat surface to eliminate any surfaces not making contact.
Installed these on my truck and they made a world of difference I have been doing my on stereo systems for over 20yrs even had some in competitions and this by far was an easier way to make door speaker sound better would definitely buy again
Awesome product. Very easy to install and fits great. Even the packaging looks top tier. I installed these and used sound deadening inside the door shells while I was replacing all the speakers in my 2022 F150. Drastically improved the sound over factory, the mid bass speakers have excursion now! If you’re replacing speakers and care about sound quality these are a must have. Thanks SG
Ordering was easy and shipping was fast. I watched the videos and followed all the instructions carefully. When putting the door skins back, in my f150 Lightning, they would not snap together. Inspection revealed the recessed part of the plate didn’t align exactly with the high part of the door cover. Tech support had several ideas but was a little slow to respond. Nothing fixed it until cutting off the high part of my door. Expect that you may need to cut or modify your door to make it go back together. Keeping that in mind, it does do a great job of sealing the “box” for your door speakers. Sounds good!!
Great product. Noticeable difference in sound. Perfect fitment, even the screw holes are placed to avoid factory wires and other door/window components. The amp rack is a clean fit. And customer service was quick to response and resolve my issue.
I ordered theses hoping they would help with just over all clarity of the factory Bose speakers. Well it worked, much tighter and distinct Bass and the highs are much clearer now. Only complaint is I REALLY wish they would have sent Self tapping screws instead of just regular screws. Having to Set 2 screws to tighten the panle down so its contoured to the door, then mark every hole, remove the 2 screws, pre-drill every hole, then put the pnl back up and install the screws was VERY annoying. The screws are much to long in my opinion as well. 1/4 in. Self tapping screws would have been perfect. There is no quality or detail skipped on these panels, I added some expandable weather stripping under the rear panels because of how the door is designed it leaves quite a bit of metal under the blocker plate and I didnt want that to possibly rattle, also a piece is needed between the window motor and door panel as it will rattle as the door flexes. I also wish they would have sent some flush plugs for the holes that are left open after removing the factory dust liner. Just seems like something that should be included to help seal the door off even more.
Great fit and very solid thick dense plastic very well made had to order the rears too.
Although its an amazing product I think one of the problems I had is when I was putting the front door panels back on it wouldn't quite fit exactly right other then that it did what I said it would but I wouldn't go out bragging that it blocks of road noise but it does reduce like 30% also I had to add a gasket on to the back side to help it seal better because the door itself had a lot of curves like protruding Inword and make the flat surface of the block off plate kind of useless what I did to help with the flex is left the plate on the dash to heat it up to give the plates more flex so it can mold more better to the door but to be honest its not worth the $200 price tag and in the end I should have just went with just regular sound deadening ro covor it and that might just solved my problem with the door panels and sound quality
Not sure what'll fit? Just call.
Tell us your vehicle and which openings you're closing off — we'll confirm the right plates before you order. No pressure, no upsell.




























material sample
material sample
material sample
material sample
material sample
material sample