Block-Off Plates$72CNC-cut Solid-Core HDPE
Pair of textured black block off plates with mounting screws for 2005-2013 Chevrolet Corvette C6

Chevrolet Corvette C6 Block Off Plates (2005-2013)

4.75 · 126 reviews
CNC-Machined HDPESeals Door EnclosurePre-Marked Alignment CirclesReduces Road NoiseImproves Sound QualityWorks With Factory Speakers

Seal your factory door access holes to reduce road noise and tighten mid-bass - works with factory or aftermarket speakers.

$72
Shipping calculated at checkout
What's included
  • CNC-machined solid-core HDPE block off plates (pair - one plate per door)
  • Zinc coated mounting screws (requires 1/8-inch drill bit)
  • Pre-marked alignment circles on each plate for easy positioning
  • Installation guide
or
Top questions 9 answered
See all 9 questions
Questions? Text us at 615-610-1413

SKU: CorvetteDoorPlates

Fits your vehicle Solid-Core USA-Made HDPE CNC-machined in Mount Juliet, TN In-house support
Why you need it

Seal the factory opening.

CNC-machined HDPE block off plates designed to seal the factory speaker access holes in your car's doors. Whether you are running factory speakers or aftermarket upgrades, the original access holes in the inner door skin allow bass energy to leak and road noise to enter the cabin. Each plate includes pre-marked alignment circles for easy positioning, then mounts with 1/8-inch drilled holes to create a semi-sealed door chamber for tighter bass response and reduced cabin noise.

Check before you buy

Fits 2005-2013 Chevrolet Corvette C6 - all trims including Base, Z06, ZR1, and Grand Sport. Coupe and Convertible. Sold as a pair (one plate per door). Does not fit C5 (1997-2004) or C7/C8 (2014+). Corvette, Z06, ZR1, Grand Sport, and Chevrolet are registered trademarks of General Motors. Used for compatibility reference only. Not sure which system you have? Ask us before you buy.

Full specifications

Mounting
Drill & screw
Thickness
1/4 in
Install Location
Inner door
Tools Required
1/8 in bit
Screw Qty
35 included
Alignment
Pre-marked
Your DIY route

The rest of the route, in one cart.

One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.

Power & Ground Kit
Full Length Power and Ground Power Cable Kit (Designed for 2015+ Vehicles)

20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.

From$175
Quick view
Speaker Adapters
2005-2025 Corvette C6/C7/C8 Front Speaker Adapters | CNC-Machined HDPE

Corvette owners building high-performance audio systems with aftermarket front speakers from 6.5-inch to 10-inch

From$72
Quick view
Tweeter Adapters
Corvette C6 & Select GM Tweeter/Mid-Range Adapters | Laser-Cut to Your Speaker

Corvette C6 and select GM vehicle owners installing aftermarket tweeters or mid-range drivers

$36
Quick view
Why material matters

Not all plates are built the same.

A block-off plate lives in your doors and cab walls through heat, cold, and constant vibration — and it gets drilled and bolted in place. Most competitors reach for metal, ABS, expanded PVC, or expanded HDPE; wood is the common DIY shortcut. Here's how each actually behaves where it counts.

MaterialEasy to work withHolds real weightLow material costShrugs off moisture
Solid Core USA-Made HDPE material sample
What SGS uses Solid Core USA-Made HDPE Dense, Non-Porous and Forgiving
StrongStrongHigh costStrong
Metal material sample
Competitor materialMetal Heavy, resonates, hard to cut
FailsStrongHigh costStrong
Expanded HDPE material sample
Competitor materialExpanded HDPE Hollow core, weak at bolt holes
StrongFailsLow costFails
ABS material sample
Competitor materialABS Rigid but thin and brittle
StrongFailsLow costFails
Expanded PVC material sample
Competitor materialExpanded PVC Often foamed, brittle when cold
StrongFailsLow costFails
Wood / Plywood material sample
DIY build shortcutWood / Plywood Absorbs moisture, swells, rots
StrongStrongLow costFails
StrongFails
How it's made

Built in-house, start to finish.

Every plate is designed, machined, and finished under one roof in Mount Juliet, Tennessee. No outsourcing, no imported blanks — just USA-made HDPE, a CNC machine, and people who care whether it fits right. Here's how a flat sheet becomes a set of plates cut for your platform.

Video · From the shop floor Video · From the shop floor
Solid Core USA-Made HDPE
Stage 01

Solid Core USA-Made HDPE

It starts with a sheet of 100% USA-made HDPE — solid all the way through, the same material trusted in marine and industrial builds. No hollow cores.

Precision CNC Machining
Stage 02

Precision CNC Machining

Each set of plates is nested from our own CAD files and cut on our CNC machine. Feeds and speeds are dialed in for HDPE so every edge comes off clean and every alignment mark lands exactly where it should.

Hand-Finished & Inspected
Stage 03

Hand-Finished & Inspected

Every plate is deburred and inspected by hand before it's packed. If it wouldn't go in our own truck, it doesn't ship.

Packed to Survive Shipping
Stage 04

Packed to Survive Shipping

Every set is wrapped, boxed, and packed by the same hands that made it — with the mounting screws bagged and the installation guide included, so nothing arrives loose, scratched, or missing.

Common questions

Everything customers actually ask.

The questions we get most on block-off plates — answered straight. Not sure if yours is here? Call, and a human will answer.

Don't see your question?
A human answers — no bots, no queues.
615-610-1413
Install it yourself

Line it up, drill it, bolt it in. Pre-marked for you.

Every set ships ready to install at home. The plates carry pre-marked alignment circles — follow the steps for your exact vehicle and grab the tools listed. Stuck? A real tech is one call away.

DifficultyModerateTime~2 hrDrilling1/8-inch holesTools6 tools
Tools you'll need
Panel removal tool
Drill with 1/8-inch drill bit
Phillips or hex driver
T15 or T20 Torx driver
Isopropyl alcohol and clean cloth
Trim clip pliers (recommended)
You'll need a drill with a 1/8-inch bit — everything else is basic hand tools.
Written steps
  1. Remove door panel trim and fasteners

  2. Disconnect any electrical connectors (window switch, mirror, etc.)

  3. Remove door panel from clips

  4. Locate factory speaker access holes in inner door skin

  5. Clean the mounting area with isopropyl alcohol

  6. Use the pre-marked alignment circles to center the plate over the access hole

  7. Verify no wiring harnesses are behind your drill location

  8. Drill 1/8-inch mounting holes through the inner door skin only - do not penetrate the outer panel

  9. Secure plate with included zinc coated screws - tighten until snug, do not overtighten

  10. Repeat for the other door

  11. Reinstall door panels, reconnect all connectors, and verify window and mirror operation

Owner reviews · real installs

How they hold up once they're installed.

Write a review
4.75/ 5
126 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and which openings you're closing off — we'll confirm the right plates before you order. No pressure, no upsell.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree — a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
$72Solid-Core HDPE · Block-Off Plates