Loaded Amp RackFrom $2,060
Choose options · $2,060
JL Audio amp on a shaped black rack with fuse holders, harnesses, power wiring and a subwoofer interface for Ford F-Series

JL Audio Loaded Subwoofer 1000wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)

5.0 · 22 reviews
1,000 W RMS @ 2 ohmsPre-wired on the rackPre-tuned in-houseRBC-1 remote bass knob4-gauge OFC wiring kit

JL Audio RD1000/1 pre-wired on our rack. Plugs into your factory audio; you add the subwoofer.

From $2,060
Shipping calculated at checkout
Choose your options Required
Choose your options
Your selection includes
  • JL Audio RD1000/1 mono amplifier, mounted and wired on the rack
  • Ten87 Design amplifier rack
  • Pre-tuned Kicker KEYLOC, wired on the rack (B&O options)
  • Kicker KEYLOC, wired on the rack (non-amplified options)
  • PAC AmpPRO SUB interface and 5-meter RCA cable (Sony option)
  • Plug-in T-harness for the factory amplifier (B&O options)
  • Subwoofer block-off plate (oval-subwoofer options)
  • Dash plug, 14 ft extension harness and junction (non-amplified options)
  • Two distribution blocks and relay, on the rack
  • JL Audio RBC-1 remote bass knob
  • 4-gauge OFC copper power and ground wire
  • Subwoofer lead with quick-disconnect plug
  • Aluminum floor feet, bolts and spacers
  • Ford tool kit and bass-knob template
  • Cable ties and tie mounts
Top questions 10 answered
See all 10 questions
Questions? Text us at 615-610-1413
Fits your vehicle In-house support
The rack · Performance tier

How it performs. In your truck.

Our score for this rack, and how it rates on the four things we judge every amplifier rack on.

Tier
Performance
Amplifier power
1000 W RMS
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Four things we rate

Hover or tap a measure
Loaded subwoofer amplifier rack

The details.

Add serious, factory-integrated bass to your truck without cutting a single factory wire. This loaded amplifier rack pairs the JL Audio RD1000 mono-block amplifier — 1000 watts RMS at 2 ohms — with a vehicle-specific plug-and-play T-harness, Kicker KeyLOC factory integration, and a full-length 4ga OFC copper wiring kit, all pre-wired and pre-tuned in-house by the Sounds Good Stereo team. Compatible with every factory system including B&O Unleashed, it is designed to drive your own subwoofer and enclosure for a clean, simple upgrade that resolves the bass roll-off in these trucks.

Full specifications

Amplifier System
JL RD1000/1
RMS Power Output
1,000 W RMS
4-Ohm Output
600 W RMS
Minimum Load
2 ohms
Bass Control
JL RBC-1
Power Wire
4 AWG OFC
Pre-Tuned Signal
Yes
Factory Audio
B&O/Sony/base
Loaded racks for your vehicle

Compare loaded subwoofer racks.

Common questions

Everything customers actually ask.

The questions we get most on loaded amplifier racks - answered straight. Not sure if yours is here? Call, and a human answers.

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Step by step for your vehicle.

Where install steps exist for your exact part, they're below - with the tools you'll need.

Owner reviews - real installs

How they hold up once they're installed.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and factory system - we'll confirm the right loaded rack before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
From $2,060Loaded Subwoofer Amp Rack
Choose options