Tweeter Adapters$36Laser-cut Solid Acrylic
Choose options · $36
Custom Laser Cut Tweeter Adapters - 30mm ID - Compatible with 2007-2018 Jeep Wrangler JK - 30mm

Chrysler, RAM & Jeep Tweeter/Mid-Range Adapters | Laser-Cut to Your Speaker

4.63 · 76 reviews
Laser-Cut AcrylicTweeter & Mid-RangeExact MM Precision56 Size OptionsMade in USASold as Pair

Laser-cut acrylic adapters for tweeter and mid-range locations on Chrysler, Dodge, RAM, and Jeep

$36
Shipping calculated at checkout
Choose your options Required
By tweeter
Choose a brand

Pick a brand above to see its sizes.

Not Sure? Add This
Your selection includes
  • 1x Pair of laser-cut acrylic tweeter/mid-range adapters, cut to your selected speaker size
  • Speakers not included. Mounts in the factory tweeter and mid-range locations using factory hardware.
Top questions 10 answered
See all 10 questions
Questions? Text us at 615-610-1413

The one measurement that matters

Find your tweeter's flush-mount diameter.

This is the single number our adapter is cut to. It's the diameter of the mounting flange — the lip that sits against the panel — not the size of the dome you see. Get it from the manual, or measure it in 30 seconds.

  • Overall width
  • Mounting-flange diameter — the one number we cut the adapter to
  • Total height
  • Mounting depth
A B C D PANEL

Easiest · 9 times out of 10

Look it up in the manual

Almost every tweeter spec sheet lists it — look for “mounting diameter,” “flush-mount Ø,” or “cutout diameter” — often the dimension labeled B on the spec drawing. It's printed in the included manual and on the manufacturer's product page. That number is what you give us.

No spec sheet? · 30 seconds

Measure it yourself

Flip the tweeter over and lay a ruler or calipers across the back of the mounting flange (dimension B) — the flat lip that presses against the panel. Measure straight across the widest point, in millimeters. Ignore the dome in the middle entirely.

Don't measure the dome. A “1-inch tweeter” describes the driver, not how it mounts — the mounting flange is almost always larger. Two same-size tweeters from different brands can have completely different flush-mount diameters. The flange is the only number that fits the adapter.

Then choose it under Choose Your Tweeter Size above, or switch to the By cutout size (mm) tab. Our adapters are cut from 35 to 79 mm.

Pick your size above
Fits your vehicle Solid Acrylic Laser-cut in Mount Juliet, TN In-house support
Why you need it

Built for the factory location.

One adapter that covers both the tweeter and mid-range locations on Stellantis-platform vehicles. With 57 size options - from small tweeters to full 3-inch mid-range drivers - you will find the exact cut for your speakers.

Check before you buy

Fits both tweeter and mid-range locations. Pre-cut for Focal, JL Audio, Kicker, Mosconi-Gladen, Audiofrog, and Arc Audio. 31 generic mm sizes from 35mm to 79mm. All brand names are trademarks of their respective owners and are used for compatibility reference only. Not sure which system you have? Ask us before you buy.

Full specifications

Install Location
Tweeter + mid
Tweeter Sizes (mm)
35 to 51
Mid-Range Sizes (mm)
14 sizes
Size Options
56 sizes
Pre-Cut for Brands
6 brands
Mounting Method
No drilling
Sold As
Pair
Your DIY route

The rest of the route, in one cart.

One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.

Amp Rack
2019-2024 Dodge Ram Crew Cab Wide Amplifier Rack | No-Drill Factory Fit

2019-2024 Ram 1500 Crew Cab owners adding one or more amplifiers behind the rear seat. Fits trucks with or without eTorque battery. No drilling.

$190
Quick view
Power & Ground Kit
Full Length Power and Ground Power Cable Kit (Designed for 2015+ Vehicles)

20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.

From$175
Quick view
Speaker Adapters
Dodge, Chrysler & Jeep 6x9 to 6.5-inch Speaker Adapters | CNC-Machined Size Converter

Owners of Dodge, Chrysler, Jeep, and RAM vehicles upgrading factory 6x9-inch oval speakers to 6.5-inch round aftermarket drivers

From$61
Quick view
Sub Enclosure
RAM Custom Four 6.5-inch Vented Subwoofer Enclosure for 2019-2023 Dodge RAM including TRX

Custom-fit four 6.5-inch subwoofer enclosure for the RAM & Dodge RAM (2019-2023) — tight, hidden bass.

From$2,104
Quick view
How it's made

Built in-house, start to finish.

Every adapter is designed and laser-cut under one roof in Mount Juliet, Tennessee. No outsourcing, no imported blanks - just solid acrylic, a laser, and people who care whether it fits right. Here's how a flat sheet becomes a pair of adapters cut to your exact speaker size.

Video - From the shop floor Video - From the shop floor
Solid Acrylic
Stage 01

Solid Acrylic

Every pair starts as a sheet of solid acrylic - flat, dense stock that holds a clean, precise edge, sized for the exact cutout your speaker needs.

Laser-Cut to Your Size
Stage 02

Laser-Cut to Your Size

Each pair is laser-cut from our own files to your selected millimeter size - or pre-cut for brands like Focal, JL Audio, Kicker, Mosconi-Gladen, and Audiofrog - so your new speaker drops into the factory location.

Checked & Paired
Stage 03

Checked & Paired

Every adapter is checked against its cutout size and paired before it's packed. If it wouldn't go in our own truck, it doesn't ship.

Packed to Survive Shipping
Stage 04

Packed to Survive Shipping

Each pair is wrapped and packed by the same hands that cut it, so nothing arrives loose, scratched, or missing - and there's no extra hardware to lose, because the adapters mount with your factory hardware.

Common questions

Everything customers actually ask.

The questions we get most on tweeter adapters - answered straight. Not sure if yours is here? Call, and a human answers.

Asked by truck owners

1 answered by our team

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Swap them in. Factory hardware, no drilling.

Every pair ships ready to install. The adapters mount with the factory hardware - follow the steps for your vehicle.

DifficultyEasyTime~15 minDrilling0 holes drilledTools2 tools
Tools you'll need
Trim removal tool
Phillips screwdriver
A trim removal tool and a screwdriver cover most vehicles.
Written steps
  1. Remove factory trim panel covering speaker location

  2. Remove factory tweeter or mid-range speaker

  3. Place laser-cut acrylic adapter over factory mounting points

  4. Secure adapter with factory hardware

  5. Mount aftermarket speaker into the adapter

  6. Connect speaker wiring

  7. Reinstall trim panel

  8. Repeat on the other side

Owner reviews - real installs

How they hold up once they're installed.

Write a review
4.63/ 5
76 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and the tweeters you're running - we'll confirm the right size before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
$36Solid Acrylic - Tweeter Adapters
Choose options