2019-2026 Silverado & Sierra Speaker Adapters | 1-inch CNC-Machined HDPE
The definitive speaker adapter for Silverado and Sierra - 1-inch solid HDPE, front and rear, three sizes
SKU: GMC-Front8-Rear65-Complete-Kit
Built for the factory location.
Built for GM truck owners who refuse to compromise on their audio build. If you are putting premium speakers in your Silverado or Sierra, this is the adapter they deserve.
Check before you buy
Works with both Bose and non-Bose equipped trucks. Three front speaker sizes (6.5-inch, 6x9-inch, 8-inch) plus 6.5-inch rear. Compatible with Focal, Hertz, JBL, Kicker, Morel, Alpine, and more. All brand names are trademarks of their respective owners and are used for compatibility reference only. Not sure which system you have? Ask us before you buy.
Full specifications
- Available Sizes
- 8, 6.5 or 6x9
- Rear Size
- 6.5-inch
- Mounting Depth
- 3 in
- Material Thickness
- 1-inch HDPE
- Mounting Location
- Front + rear
- Factory Audio
- Bose / non-Bose
- Plug Harness
- Complete Kit
- Sold As
- Pair per spot
The rest of the route, in one cart.
One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.
Truck owners who want a solid mount for amps and a processor on the rear cab wall, using the factory studs.
20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.
Tap your factory Bose amp's subwoofer signal — no wire cutting.
Zero-splice install harness — clean, reversible wiring with no cut factory connectors.
Zero-splice install harness — clean, reversible wiring with no cut factory connectors.
A pair of plug pigtails with the GM factory 2-pin door-speaker connector. Zero-splice, reversible aftermarket door speaker install on most 2010+ GM trucks and SUVs.
Silverado and Sierra owners installing aftermarket tweeters from a 2-way or 3-way component speaker kit
2019-2021 Sierra/Silverado 1500 and 2020-2022 HD door speaker upgrades - front plates fit all cab styles
2022+ Sierra 1500 and Silverado 1500 door speaker upgrades - front plates fit all cab styles
2023+ Sierra HD and Silverado HD (2500/3500) door speaker upgrades - front plates fit all cab styles
Kicker's own carpeted truck box with two 12-inch L7T subs installed, made to sit under the rear seat.
Factory-look stealth subwoofer enclosure for the Silverado & Sierra 1500 (2019-Up) — tight, hidden bass built around your JL Audio.
Factory-look stealth subwoofer enclosure for the Silverado & Sierra (2019-Up) — tight, hidden bass built around your JL Audio.
Not all speaker adapters are built the same.
A speaker adapter lives in your doors and panels through heat, cold, moisture, and constant road vibration - with your new speakers bolted straight to it. Most competitors reach for metal, ABS, expanded PVC, or expanded HDPE; wood is the common DIY shortcut. Here's how each actually behaves where it counts.
| Material | Easy to work with | Holds real weight | Low material cost | Shrugs off moisture |
|---|---|---|---|---|
material sample
What SGS uses
Solid Core USA-Made HDPE
Dense, Non-Porous and Forgiving
| Strong | Strong | High cost | Strong |
material sample
Competitor materialMetal
Heavy, resonates, hard to cut
| Fails | Strong | High cost | Strong |
material sample
Competitor materialExpanded HDPE
Hollow core, weak at bolt holes
| Strong | Fails | Low cost | Fails |
material sample
Competitor materialABS
Rigid but thin and brittle
| Strong | Fails | Low cost | Fails |
material sample
Competitor materialExpanded PVC
Often foamed, brittle when cold
| Strong | Fails | Low cost | Fails |
material sample
DIY build shortcutWood / Plywood
Absorbs moisture, swells, rots
| Strong | Strong | Low cost | Fails |
Built in-house, start to finish.
Every adapter is designed, machined, and finished under one roof in Mount Juliet, Tennessee. No outsourcing, no imported blanks - just USA-made HDPE, a CNC machine, and people who care whether it fits right. Here's how a flat sheet becomes a set of adapters cut for your vehicle.
Video - From the shop floor
Solid Core USA-Made HDPE
It starts with a sheet of 100% USA-made HDPE - solid all the way through, the same material trusted in marine and industrial builds. No hollow cores.
Precision CNC Machining
Each set of adapters is nested from our own CAD files and cut on our CNC machine. Feeds and speeds are dialed in for HDPE so every speaker cutout comes off clean and every factory mounting hole lands exactly where it should.
Hand-Finished & Inspected
Every adapter is deburred and inspected by hand before it's packed. If it wouldn't go in our own truck, it doesn't ship.
Packed to Survive Shipping
Every set is wrapped, boxed, and packed by the same hands that made it - with the gasket tape and mounting screws bagged, so nothing arrives loose, scratched, or missing.
Everything customers actually ask.
The questions we get most on speaker adapters - answered straight. Not sure if yours is here? Call, and a human answers.
One year, on everything we sell. Every item is covered for one year from delivery. If something fails in that first year, we make it right. Questions about a claim? Call us — a real person handles it with you.
Asked by truck owners
1 answered by our teamThe adapters are sold as pairs.. So if you choose the " Front 8-inch + 6.5-Inch Rear" option, that is front & rear, two pairs, so a total of 4 adapters
Answered by the SGS team · Nov 2021
Bolt the adapters in. No drilling.
Every set ships ready to install at home. Follow the steps for your vehicle - the adapters go in with basic hand tools, no drilling.
-
Remove door panel trim and fasteners
-
Carefully remove door panel from clips
-
Disconnect factory speaker wiring
-
Unbolt and remove factory speaker
-
Place 1-inch HDPE adapter into factory mounting position
-
Secure adapter with included hardware
-
Connect wire harness (Complete Kit) or splice connections (Adapters Only)
-
Mount aftermarket speaker to adapter
-
Reinstall door panel and test
How they hold up once they're installed.
My experience has been great—thanks for the adapters. They are for some 8-inch Mmats Pro Audio speakers.
Sage and the guys are awesome been buying. From them for a while and they are quick to deliver
Packaged nicely with all the hardware you need. Easy installation and fit perfectly.
I've been a loyal customer of SGS for a couple years now. Everything they make is top quality. These brackets I've purchased for my last two vehicles. Expensive, but you get what you pay for. Noone does it better.
Great quality comes with everything you need for a flawless installation. I highly recommend these adapters. Don't cheat yourself with those cheap plastic ones get the good stuff.
Had the client order the front 8" kit for his Tahoe. Swapped the left and right brackets for fitment. Added a 1/8" spacer to them and took a rabbeting bit to give slightly more room for the 8" Def Bonce and it dropped right in. Only other modification was to the seat memory switch. Built a little platform for it to sit into. Besides that they were great
These 6.5” speakers Brackets worked great in my 2013 Chevy Tahoe. I lined the back with Dynaliner 1/8" thick, to reduce vibration. Also, paired with NVX Speaker Baffles. Items fit perfectly with no modifications.. thank you!
As all of the product I have purchased from these guys have been, these are of great quality and a perfect fit. My frogs are happy and sound awesome in their new home.
Brackets seem well built. Was short on the mounting bolts and there was no block off plate. Maybe I misunderstood what was included.
Our Mounting Cutout Diameter is: 5.6-inch / 142mm. Some speakers that are based off of home audio drivers (PA Style Speakers) are not a traditional size. If you need us to open up the adapter to fit your speaker, let us know and we would be glad to make it happen for you. Thanks
I loved the speaker adapters, they fit perfectly and are very high quality. My installer stated that he had never seen such high quality adapters. My only request would be to provide slightly longer bolts for the bottom 2 holes. After putting on the sound deadening material, that extra thickness made it a little bit of a challenge getting the washer and the nut on. But that is very minor.
Ordered up front 6x9 brackets for my 2016 GMC Sierra 3500.
Install was complicated due to my speakers large magnet hitting the window track.
Don helped me out and sent me some spacers that bumped it out another inch.
Installed brackets and spacers.
Worked out well.
Due to the thickness of the original bracket there was some trimming to the inside of the door panel.
Very satisfied customer.
100 times better than the cheap Metra brackets.
Thanks!
Definitely noticed a difference in the mid bass. The difference in quality of sound will defer based on your ears. Install was straight forward. Both 7/64 or 1/8 drill bit will work just fine.
Over all perfect kit. I would suggest not to add the crimped speaker terminals to the adapter plug as I had to cut them off too small for my speaker. The sound proff only came with 4 12x12 for 4 truck doors pictures made it look as if I was going to have enough to cover the entire door. The 2 way tape doesn't curve to speaker in the way it is intended for. Adapters was perfect foam strip was perfect. I would suggest adding a drill bit to the kit for drilling the right size hole. Sound proff was good quality just not enough. I would buy again. I also got the amp rack it was perfect
I had previously ordered audio equipment from another place which included a very cheap set of speaker adapters, free. There is a reason those were free. I kept looking and found Soundsgoodstereo and their vehicle specific adapters. Perfect match and solid built. It’s exactly what I was looking for. Thank you.
You won’t regret mounting your high powered expensive speakers with these rings. If you didn’t skimp on your equipment why skimp on necessary install hardware? It doesn’t make sense to me. These speaker adaptors are excellent, get them!!
Quality product. Fit perfectly as stated. Thanks will buy again !
Quality product - great knowledge and excellent customer service! Wish they were local to do more business with them.
Perfect fitment, very sturdy material , successfully helps SQ
Nice quality, fast shipping, and excellent customer service when calling the store!
Love the adapters but didn’t get both sets of speaker harnesses hopefully you have good customer service.
Hello, regarding the 2014-2018 Silverado front door speaker adapter plates, what is the max speaker mounting depth that can be used before the magnet interferes with the window workings? Thanks
It's hard to say. It seems around 2-3-inches since our adapter is only 1-inch and the newer trucks do not have the window bar behind the speaker. On the newer trucks, you have tons of room, on the older trucks, I would measure as we do not have this exact information.
Not sure what'll fit? Just call.
Tell us your vehicle and the speakers you're running - we'll confirm the right adapters before you order.













material sample
material sample
material sample
material sample
material sample