Kicker Loaded Subwoofer 1800wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
Kicker CXA1800.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
SKU: PP-Loaded-CXA1800-24-BOUL
How it performs. In your truck.
Our score for this rack, and how it rates on the four things we judge every amplifier rack on.
- Tier
- Performance
- Amplifier power
- 1800 W RMS
- Essential
- Performance
- Audiophile
- Flagship
Four things we rate
Hover or tap a measureThe details.
This rack is the amplifier half of a subwoofer upgrade for trucks with B&O or base factory audio. A Kicker CXA1800.1 and a Kicker KEYLOC come mounted, wired and pre-tuned on our half-inch HDPE rack, which bolts in behind the driver-side rear seat and plugs into the factory audio with a harness, so no factory wires are cut. You add the subwoofer: 1,800 watts RMS into 2 ohms or 1 ohm, 900 into 4 (Kicker's ratings).
Full specifications
- Amplifier System
- CXA1800.1
- RMS Power Output
- 1,800 W RMS
- 4-Ohm Output
- 900 W RMS
- Integration
- Kicker KEYLOC
- Pre-Tuned Signal
- Yes
- Power Wire
- 4 AWG OFC
- Mounting Location
- Driver side
- Factory Audio
- B&O or base
Compare loaded subwoofer racks.
JL Audio Loaded Subwoofer 1500wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
JL Audio RD1500/1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
- Amplifier
- JL Audio RD1500/1 mono-block
- Power
- 1,500 W RMS @ 2 ohms
- Bass Control
- JL RBC-1 remote knob
22 reviews
Kicker Loaded Subwoofer 1200wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
Kicker CXA1200.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
- Amplifier
- Kicker CXA1200.1 mono-block
- Power
- 1,200 W RMS @ 2 ohms
- Bass Control
- Kicker remote bass knob
22 reviews
Kicker Loaded Subwoofer 1200wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
Kicker CXA1200.1 sub amp rack, pre-wired and pre-tuned in-house, with the plug-in interface for B&O, Sony or base factory audio.
- Amplifier
- Kicker CXA1200 mono-block
- Power
- 1,200 watts RMS
- Bass Control
- Kicker remote level control
22 reviews
JL Audio Loaded Subwoofer 1000wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
JL Audio RD1000/1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
- Amplifier
- JL Audio RD1000/1 mono-block
- Power
- 1,000 W RMS @ 2 ohms
- Bass Control
- JL RBC-1 remote knob
22 reviews
JL Audio Loaded Subwoofer 1500wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
JL Audio subwoofer-and-amp rack for Ford F-Series — bolt-in 1500W RMS, fits factory systems with no fabrication.
- Amplifier
- JL Audio RD1500/1 mono-block
- Power
- 1,500 W RMS @ 2 ohms
- Bass Control
- JL RBC-1 remote knob
22 reviews
JL Audio Loaded Subwoofer 1000wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
JL Audio RD1000/1 pre-wired on our rack. Plugs into your factory audio; you add the subwoofer.
- Amplifier
- JL Audio RD1000 mono-block
- Power
- 1000W RMS @ 2-ohm / 600W @ 4-ohm
- Bass Control
- RBC-1 remote level control
22 reviews
Arc Audio Loaded Subwoofer 1100wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
Arc Audio X2 1100.1 sub amp, pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
- Amplifier
- Arc Audio X2 Series mono-block
- Power
- 1100W RMS @ 1-ohm / 600W @ 2-ohm
- Bass Control
- Arc Audio remote level control
22 reviews
Kicker Key 500 Loaded Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
Kicker subwoofer-and-amp rack for Ford F-Series — bolt-in, fits factory systems with no fabrication.
- Amplifier
- Kicker KEY 500 mono-block
- Power
- 500 watts RMS
- Bass Control
- Kicker remote level control
22 reviews
Kicker Key 500 Passenger Side Loaded Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
Kicker subwoofer-and-amp rack for Ford F-Series — bolt-in, fits factory systems with no fabrication.
- Amplifier
- Kicker KEY 500 mono-block
- Power
- 500 watts RMS
- Bass Control
- Kicker remote level control
22 reviews
Arc Audio Loaded Subwoofer 1100wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
Arc Audio X2 1100.1 mounted, pre-wired and pre-tuned on our rack. Plugs into your factory audio; you add the subwoofer.
- Amplifier
- Arc Audio X2 Series mono-block
- Power
- 1100W RMS @ 1-ohm / 600W @ 2-ohm
- Bass Control
- Arc Audio remote level control
22 reviews
Kicker Loaded Subwoofer 1800wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
Kicker CXA1800.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
- Amplifier
- Kicker CXA1800 mono-block
- Power
- 1,800 watts RMS
- Bass Control
- Kicker remote level control
22 reviews
Mosconi-Gladen Loaded Subwoofer 2500wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
Mosconi-Gladen PRO 2|30 sub amp rack, pre-wired and pre-tuned, with the plug-in harness for your factory audio.
- Amplifier
- Mosconi-Gladen PRO 2/30
- Power
- 1650W RMS @ 4-ohm
- Bass Control
- Mosconi-Gladen remote level control
22 reviews
Mosconi-Gladen Loaded Subwoofer 1200wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
Mosconi-Gladen subwoofer-and-amp rack for Super Duty & F-150 — bolt-in 1200W RMS, fits factory systems with no fabrication.
- Amplifier
- Mosconi-Gladen RC1200
- Power
- 1200W RMS
- Bass Control
- Mosconi-Gladen remote level control
22 reviews
Mosconi-Gladen Loaded Subwoofer 975wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
Mosconi-Gladen subwoofer-and-amp rack for Super Duty & F-150 — bolt-in 975W RMS, fits factory systems with no fabrication.
- Amplifier
- Mosconi-Gladen PRO 1/10
- Power
- 975W RMS
- Bass Control
- Mosconi-Gladen remote level control
22 reviews
Mosconi-Gladen Loaded Subwoofer 975wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
Mosconi-Gladen subwoofer-and-amp rack for Ford F-Series — bolt-in 975W RMS, fits factory systems with no fabrication.
- Amplifier
- Mosconi-Gladen PRO 1/10
- Power
- 975W RMS
- Bass Control
- Mosconi-Gladen remote level control
22 reviews
Mosconi-Gladen Loaded Subwoofer 1200wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
Mosconi-Gladen subwoofer-and-amp rack for Ford F-Series — bolt-in 1200W RMS, fits factory systems with no fabrication.
- Amplifier
- Mosconi-Gladen RC1200
- Power
- 1200W RMS
- Bass Control
- Mosconi-Gladen remote level control
22 reviews
Mosconi-Gladen Loaded Subwoofer 2500wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
Mosconi-Gladen PRO 2|30 sub amp rack, pre-wired and pre-tuned, with the plug-in interface for your factory audio.
- Amplifier
- Mosconi-Gladen PRO 2/30
- Power
- 1650W RMS @ 4-ohm
- Bass Control
- Mosconi-Gladen remote level control
22 reviews
Everything customers actually ask.
The questions we get most on loaded amplifier racks - answered straight. Not sure if yours is here? Call, and a human answers.
One year, on everything we sell. Every item is covered for one year from delivery. If something fails in that first year, we make it right. Questions about a claim? Call us — a real person handles it with you.
Step by step for your vehicle.
Where install steps exist for your exact part, they're below - with the tools you'll need.
-
Fold down the rear seat backs; the seats do not need to come out.
-
On B&O trucks, take the factory subwoofer out from behind the driver-side seat.
-
Find the floor threads for the feet (they can be under the carpet and a square of tape), screw the feet into the slots for your truck from the mounting feet chart, and bolt the rack down with a spacer under each foot.
-
Bolt the top bracket to the seat-latch bracket, in front of it.
-
On B&O trucks, pre-drill 1/8-inch holes and screw the block-off plate over the factory subwoofer opening, cork side toward the hole.
-
On B&O trucks, find the factory amplifier behind the carpet panel on the back wall toward the passenger side, unplug the one connector the T-harness matches, plug the T-harness in between, and leave the amplifier's other plugs connected.
-
On trucks without B&O, plug the dash harness in at the radio and run the extension harness back to the rack along the driver side.
-
Run power and ground from the battery down to the frame rail, back along it, and into the cab through two 3/4-inch floor holes sealed with the included glands.
-
Connect the ground at the battery, on the battery side of the factory battery sensor, and the power wire with its inline fuse.
-
Connect power and ground to the distribution blocks on the rack, plug in the subwoofer lead, and plug in the LED-light lead if your enclosure has lights.
-
Run the Kicker bass knob cable forward if you want the knob within reach, test the system, then fold the seat backs up.
How they hold up once they're installed.
Truly a plug and play system. All mounting hardware is included, no drilling no cutting etc. High quality components and excellent customer service!
Pictures don’t do this kit justice. They literally thought of everything. Install went well and this kit powers two Sundown SA-V3 in 8” fantastic. I believe by the time this posts they will have updated install videos as well. Very glad I went this route and didn’t try to piece mill this project. 2021 F150 Raptor
I bought this kit along with the dual L7T kicker 10s. First of all it only took about 2.5 weeks to get it and was packaged very well. The material quality of the whole set up is top tier, and I've never owned a system that looked so good. If you are somewhat mechanically inclined you can install this yourself but if you've ever installed stereo equipment it's even easier. I've never had something that went in so fast, the part that took me the longest was figuring out where I wanted my bass control knob(I'll post a picture of where mine went, it did require me to trim the bezel and knob). Everything else just goes right into place. Just watch a couple of their YouTube videos and you're good to go. I will only write reviews if I'm either completely horrified or my expectations are exceeded, which was the case with SGS. I called with one question and before I could even ask they knew it was about a couple extra wires with a molex connector for LEDs that I didn't purchase. The rest of the short phone call they spent asking how my install was going and making sure I didn't need anything else, so I'd say their customer service was excellent. Plenty of thump from the subs and sounds good with all types of music, being that they're 10" subs in a sealed box. If you're a full blown audiophile definitely get their full amp rack and the rest of the speakers but if your main goal for the moment is more impactful bass, this rig is perfect.
No one can can understand that it’s just four little 6.5 I went above and beyond on the instal sound treatment is. Big big. I did my floor to I did a center channel with I amp you can. A they will make what you want …and there service top. Notch Don is the man. He see your vision !!!!!! For 12k and my labor you can not get a plug and play This impressive worthy of the wait. You just don’t comprehend the sound and then it breaks. I’m. And I might need some tweaks I’m it but I’m not calling cuz it could just be my old ears this is no joke you can here thing like your I’m a real sound studio recording in your truck. Plays every thing. So nice I’m still playing some music. Just for the sound experience Falco on that any ways get you some. And. Do a weekend. With your buddy. Installing it don’t half ass the sound treatment injoy. I am.
I decided to do an upgrade. Changed out the door speakers and added the a-pillar speaker kit with the Focal Flax kit. The quality of the custom a-pillars is top notch. I even added their own subs they came out with. They tuned everything before they sent it. The truck sounds amazing. I was really surprised by how much sound comes out of 2 small subs in their custom enclosure. The customer service is top notch. They really know how to take care of the customer and that is really appreciated these days. I would not hesitate at all to recommend them to anyone in need for an upgrade.
This was well worth the wait. When they say plug and play they mean plug and play. I didn't have to tune a single thing. Absolutely amazing fit and finish. The sound partnered with the dual sub enclosure is awesome. I had a few questions and the they were quick to respond. Sage even called me directly.
The amp rack itself mounts great. Powers the subs as they should, assembly was easy!
It’s been 4 months since I installed my Arc Audio Passive 5-Channel Loaded Amp Rack. Recap: Focal Access Components and Coaxials, with a JL Audio Stealthbox (single 13) for the bass.
After listening to just about all genres of music (Rock, Metal, Rap, Jazz, Country, Electronic, etc), I can say it was a wise purchase, with zero buyer’s remorse. I have turned the volume up to max, and did not hear any distortion. The mids hit hard, the highs are crisp, and the bass sounds is the icing on the cake (no bass boost needed). If a passive system sounds this good, I can imagine how an active system will sound. GREAT JOB SGS TEAM!
I definitely recommend this setup for anyone looking for an upgrade that’s affordable with above average sound quality. I added the Focal Access 6.5” Components and 6.5 Coaxials, Black Hole Tiles (36 each door) and Block Off Plates, and a JL Audio Stealth Box (single 13”) I had from a previous system for my 2017 F-150 SC.
The workmanship and attention to detail with the loaded Amp Rack exceeded my expectations. Also, the SGS team goes above and beyond with packaging the items to ensure the product arrives without damage.
Well worth the wait!
Sent my truck from Denver to Nashville to have the crew build a competition grade sound quality build. Let’s just say it was so incredible my wife got a tear in her eye playing the favorite song.
Old school bass head here. Several high end systems from 90’s-20’s. Knew exactly what to expect from a combo like this. Used to install myself in my late teens and early 20’s . What I did not expect was just how well built and extremely good looking everything is. OUTSTANDING…. Also assumed they would pretune the amp about 80% to keep first timers from pushing the woofers to hard. NOPE. This thing absolutely slams. I put sound mat everywhere except the headliner and of course the only bass rattle I have is my top brake light. Got to order another pack of matt and I’ll tighten that right up. I don’t know if I’ve been out of the game to long or SGS has serious discounts somewhere. Between the high end equipment prices and the pure attention to detail they HAVE TO BE in the red when it’s all said and done. Seriously impressed. Extremely nice with great equipment. Communication was on point also. BRAVO SGS!
Why did I wait this long? The install was as about as straight forward as you get. The install kit was AMAZING. They thought of everything. The passthroughs to the cab were genius. The harness to the deck was the perfect length and plug and play. Thats before you get the real sound you thought you had paid up for in fancier truck. I wasted my money with Ford and should have saved it for these guys.
Takes the guesswork out of everything. I installed a complete system in one day. Didn't have to source all the parts or guess on which size fuses to use. Worth every penny to have it done right.
Super Easy!!!! So easy a caveman can do it. Everything was plug and play. Removed the underneath storage bin in preparation for the sub-box. Installed the Rack in about 30 minutes. Wired the Amp inline with the stock Amp. Put the sub wires under the seat and closed up that side of the truck. The passenger side was just as easy. After running the power wires under the truck ( very easy to do) found a good spot to pop 2 holes in the body to run the power and ground into the cab. (Watch their videos for this). Cut the wires to length and installed them into the power junctions on the Amp rack. Had the wife help me load the sub box into the truck. (It's built like a tank!) I have the 3 JL 10's in mine. Plugged in the 2 power cables into the box. Hooked back up the batteries on the truck and it sounds AWESOME!. Plenty of bass in that truck. I wired the bass knob just under the start stop button and ran the wires down the drivers side floor trim and plugged that into the amp.
Overall, this system is the best out there. With minimal tools. You can do it. I took my time and I had it all installed in about 3 hours.
This amp rack was built right. The install was straight forward and I had zero issues getting it done. Watch the videos they provide, big help. Once I hooked the up power, it worked flawlessly. Definitely recommend purchasing from these guys if your browsing audio upgrades.
The Amp Rack kit arrived and was packaged very securely. The board itself is wired very neatly with pigtails for plugging into the sub and factory amp..
All of the accessories (heat shrink/flush cutters/zip ties/mounting brackets/hardware) were bagged and labeled. The installation, after watching their youtube videos was exactly as described and truly Plug and Play.
I could not be more pleased with this kit, and would highly recommend it to anyone!
Amp and rack came exactly looking like the picture. I also bought the Focal speaker system that came with custom made brackets for the speakers and tweeters. Most of all, the support is outstanding!!
Not sure what'll fit? Just call.
Tell us your vehicle and factory system - we'll confirm the right loaded rack before you order.















