Underseat "Audiophile" Focal Utopia 10-Channel
Built per truck — select yours
Pre-tuned package family

Underseat "Audiophile" Focal Utopia 10-Channel

We build this package per truck — the amp variant, the components and the price on this page follow the truck you choose.

From $25,826 Final price is your truck’s exact build — select your vehicle.
Talk to a builder · 615-610-1413
5.0★
22 reviews
Checking your vehicle…

Select your truck to see your exact package and price

These packages are built per truck — the components, the amp variant, and the price are specific to your exact vehicle. Tell us what you drive and this page shows the one build we ship for it.

Built for your exact truck Pre-tuned plug & play Hand-built in TN In-house support
The package · Flagship tier

How it sounds. In your truck.

Here's what it's great at, what to know before you buy, and where it lands in our lineup.

Tier
Flagship
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Seven things we listen for

Hover or tap a measure

Build your complete system.

Your system
The system builder
Build your complete system

Speakers, sub, amp and treatment, priced together.

01 Front SpeakersPick your truck
02 SubwooferFrom $849.99
03 Amp RackFrom $980
04 Sound TreatmentFrom $797
1 of 4 chosen
Build your system
How we build it

From your platform to your driveway.

Every package is engineered, hand-built, and tuned before it ever ships — so the install is the easy part. All done in-house in Mount Juliet.

STEP 01

Engineered for your platform

We design the whole system around your exact truck — sizes, power, enclosure volume, and fitment, worked out up front.

STEP 02

Hand-built in our shop

Enclosure cut, amp rack loaded and wired, harnesses made — built and inspected by our team in Mount Juliet.

STEP 03

Tuned inside your truck

We measure and tune the system in the real cab with reference gear, so it arrives set for that acoustic space.

STEP 04

Delivered plug-and-play

It ships dialed and labeled, with every part but the adhesive door treatment fully removable. Bolt it in, plug the harnesses, and play.

Straight answers

The questions we hear most.

The questions each component gets asked on its own page — grouped so you can read only the part you care about.

This package

2 questions
What’s included in this package?
  • Focal Utopia M 3-Way Plug & Play Kit
  • Plug & Play Focal Flax EVO 2-Way Speaker Kit Upgrade Package
  • Gladen-Mosconi PRO Series 10-Channel Active Loaded Amplifier Rack
  • Sound Treatment Package
  • Custom Two Focal Utopia M 10" Down-Firing Sealed Subwoofer Enclosure
  • Choose Your Ford Level 5 Subwoofer Enclosure Insert
  • Gladen-Mosconi PRO Series 10-Channel Active Loaded Amplifier Rack
  • Focal Utopia M 3-Way Plug & Play System
  • Sound Treatment Package
Is an amplifier included?

Yes — this package includes its loaded amplifier rack:

  • Gladen-Mosconi PRO Series 10-Channel Active Loaded Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
  • Gladen-Mosconi PRO Series 10-Channel Active Loaded Amplifier Rack (All Factory Systems including B&O Unleashed)

Focal Utopia M 3-Way Plug & Play Kit

Asked on this part’s own page · 2021-2026 F-150 & Lightning, 2023-2026 Super Duty
6 questions
Will it fit my truck?

Select your truck at the top of the page: it checks it against our fitment list and tells you whether this kit fits.

It works with the B&O 8-Speaker, B&O Unleashed and non-amplified factory systems. If your truck takes our older-generation Utopia M kit, the page takes you straight to it.

Is an amplifier included? What else do I need?

No. This kit is the drivers, the A-pillars, the door adapters, the harness and the sealing parts. It runs 3-way active: tweeter, midrange and mid-bass each need their own amplifier channel and DSP crossover.

The builder on this page adds one of our loaded amp racks, and lets you add rear speakers, a subwoofer and sound treatment. Call or text 615.610.1413 if you want help choosing.

Does my factory audio system matter?

Yes. It decides which OEM-style grille matches your truck, and the builder picks the amp-rack version for your system. The kit works with the B&O 8-Speaker, B&O Unleashed and non-amplified systems.

Not sure what is in your truck? Text us at 615.610.1413 and we will confirm before you order.

Do I need to send you my factory A-pillars?

No. We build every set on new Ford pillar trim with new Ford grab handles, so there is no core to send. Your finished pillars arrive wrapped in Ebony (Black), Gray (with a black handle) or King Ranch (Java), with the grille you picked.

Which grille should I choose?

The OEM-style laser-cut mesh follows your factory system: "B&O Unleashed OEM Style" for a B&O Unleashed truck, "B&O 8-Speaker and Non-Amplified OEM Style" for a B&O 8-Speaker or non-amplified truck. "Laser Cut Mesh Open Design" (a larger open mesh) fits every truck.

When you build on this page with your truck selected, only the grilles that match it are offered.

How is the kit wired? Does anything get cut?

Nothing in your truck is cut. On a 3-way kit the speakers do not use the factory speaker connection: each driver is wired to its own amplifier channel through our soldered, heat-shrunk speaker harness.

The new A-pillars replace your factory pillars, and the 8-inch mid-bass come mounted in our door adapters. Closed-cell foam strips seal each speaker to the door panel, and two BlackHole squares seal the adapters to the door metal. Everything ships over-packaged to arrive safe.

Plug & Play Focal Flax EVO 2-Way Speaker Kit Upgrade Package

Asked on this part’s own page · for 20152026 F-150 and 2017-2027 SuperDuty (FOR OUR PLUG & PLAY PACKAGES ONLY)
6 questions
Why is this kit only sold as part of a package?

This is the package version of our Focal Flax EVO 2-way kit. It is checked out as part of a build with one of our loaded amp racks.

Want the speakers on their own? Our stand-alone Focal Flax EVO 2-way Plug & Play kit is sold separately.

What comes in the kit?

The Front & Rear Complete Set: a Focal PS165FXE 6.5-inch two-way component set, the woofers mounted on our front door adapters, with tweeter adapters we 3D-print here for the Flax EVO tweeters; and Focal PC165FE 6.5-inch two-way coaxials mounted on our rear door adapters.

Every door speaker comes with a plug harness and closed-cell foam, plus speaker gasket foam tape and mounting screws.

Can I buy just the front or just the rear set?

Sold as the full front + rear set — call or text us for just front or rear.

Do the speakers come mounted on the adapters?

Yes. Each speaker is assembled onto its door adapter with its plug harness here before the kit ships, so on install day the speakers go straight into the doors.

How do the Flax EVO tweeters mount?

On tweeter adapters we 3D-print here for the Flax EVO tweeters. They come with the Front & Rear Complete Set.

What are the door adapters made of?

Our door adapters are CNC-machined here from 1/2-inch HDPE. The closed-cell foam seals each door speaker to the door panel.

Gladen-Mosconi PRO Series 10-Channel Active Loaded Amplifier Rack

Asked on this part’s own page · for Ford 2023+ Super Duty and 2024+ F150 Trucks
7 questions
Will this work with my B&O or B&O Unleashed factory system?

Yes. The rack includes the ZEN A2B High-Resolution B&O integration module for B&O-equipped trucks, and factory B&O customers also receive the sub block off plate. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Why does this rack have to be purchased with a full package?

It is sold as a system with front speakers. Choose your truck and your speakers in the builder on this page - our team tunes the rack in-house to those exact speakers before it ships, which is why it is not sold on its own. Already have our speakers from an earlier order? Call or text 615-610-1413.

Does the rack come pre-wired and pre-tuned?

Yes. Every rack is pre-wired, pre-tuned, and tested in-house by our award-winning team before it ships. The DSP built into the PRO Series 8-channel amplifier arrives loaded with your tune, so the most technical part of the upgrade is already done.

Which trucks does this fit?

Select your truck at the top of the page to confirm the fit. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Is the wiring included, or do I need to buy it separately?

Everything is included and shipped to your door: a full-length 1/0ga OFC copper power and ground wiring kit, a vehicle-specific plug-and-play T-harness, and a subwoofer harness with quick disconnect connectors.

Can I adjust the bass level from the driver’s seat?

Yes. The rack includes the Gladen-Mosconi RTC remote subwoofer level knob, so you can dial the subwoofer level up or down on the fly without touching the tune.

Where does this rack mount?

Across the full width behind the rear seat. It hangs from the seat-latch brackets at the top of the back wall and bolts to factory threaded holes in the floor. The mounting feet chart in the install guide shows where the floor brackets go for your truck.

Sound Treatment Package

Asked on this part’s own page · for 20212026 Ford F-150 & 2023-2026 Super Duty SuperCrew – Block Off Plates, Blackhole MAT & Tiles
10 questions
Which level should I choose?

Choose by the power on your door speakers. Level 1: factory power up to 65 watts RMS per channel. Level 2: 65-150 watts RMS per channel. Level 3: 150 watts RMS per channel and up. Not sure? Call or text 615.610.1413 with your amp and speakers.

What's the difference between the levels?

Every level has the same front and rear block off plates, the screws, and enough MAT for the back wall. Level 1: 6 boxes of Blackhole MAT (66 sq ft) and 18 tiles. Level 2: 5 boxes (55 sq ft) and 72 tiles. Level 3: 4 boxes (44 sq ft) and 144 tiles, 36 in every door. Tiles are the more effective way to control sound inside the door, so as the level goes up they take over the outer skin that Level 1 covers with MAT.

Does it cover the back wall?

Yes. Every level has enough MAT for the four doors and the big flat area of the back wall - about one box of MAT goes on the back wall. Save your offcuts for the plastic door panels so you don't run short.

Will it fit my truck?

Select your truck at the top of the page - the vehicle selector shows whether this kit fits it. The kit works with any factory audio system; there is no wiring. Not sure? Call or text 615.610.1413.

Do I have to drill?

Only for the block off plates: 1/8-inch pilot holes in the door's inner skin. The screws are included; the MAT and the tiles are self-adhesive.

What happens to the factory weather barrier?

It comes out and is not reused, along with any white sound-deadening material over the access hole. The block off plate covers that hole instead.

Do the speakers come out?

Yes. The speaker comes out so the tiles can go behind it - 4 x 7 mm screws on a front door, 3 on a rear door. Put the factory speaker back, or fit aftermarket speakers with a foam ring.

Where do the tiles go?

On the bare metal of the outer door skin inside the door, starting right behind the speaker. Flat surfaces only, about 1/8 to 1/4 inch between tiles so water can drain, and never cut a tile.

My door panel won't clip back on. What now?

Make sure the white sound-deadening material over the access hole is gone, and route the lock cable above the door pocket when you refit the panel. Still stuck? Call or text 615.610.1413.

What do I need that is not in the box?

Your tools: a panel removal tool, a 7 mm socket, a drill with a 1/8-inch bit, a utility knife, a roller, a tape measure, and wax and grease remover or alcohol with a rag. The kit does not include speakers.

Custom Two Focal Utopia M 10" Down-Firing Sealed Subwoofer Enclosure

Asked on this part’s own page · for 2009–2026 Ford FSeries SuperCrew Trucks
8 questions
Which subwoofers are inside?

Two Focal Sub 10 WM subwoofers from Focal's Utopia M line, installed and wired. Focal built this 10-inch woofer with a 4.7-inch (120 mm) voice coil and a neodymium motor, for small sealed enclosures.

Why a sealed enclosure?

The Sub 10 WM is made for a sealed box: Focal sets a minimum of 10 litres, and the space under the rear seat gives two of them the air they need. Sealed keeps the bass tight and accurate, from low notes to the punch of a kick drum.

Do I lose the storage under the rear seat?

Yes. The enclosure goes where the factory under-seat storage tray sits: the tray unbolts and the enclosure takes its place. No seat lift is needed. If you need to keep that storage, ask us about our behind-the-seat enclosure.

Which impedance should I choose?

The one your amplifier is built to drive: 1 ohm or 4 ohms. Each Sub 10 WM has two 4-ohm voice coils, and we wire them at our shop to the load you choose, so pick it before you order. Not sure? Tell us your amplifier and we will match it.

How much power do the subwoofers handle?

Focal rates each Sub 10 WM at 400 watts nominal and 800 watts maximum, so the pair handles 800 watts nominal.

Does it come with an amplifier?

No. This is the loaded enclosure, with a harness to connect it to your amplifier. Use your own amplifier, or ask us about a loaded subwoofer amp rack to go with it.

Does it light up, and can I choose the emblem?

Yes. RGB lighting is included and is controlled from your phone, and you choose the emblem face as you build the enclosure on this page.

How does it compare with the four Ten87 Design 6.5-inch enclosure?

They suit different listeners. The two Utopia M 10s, in a sealed box, are tighter and more detailed in the upper bass: a kick drum sounds like a kick drum. The four 6.5s in their vented box give a little more low bass. Call or text 615-610-1413 and we will help you choose.

Choose Your Ford Level 5 Subwoofer Enclosure Insert

Asked on this part’s own page
5 questions
Can I buy the insert on its own?

No. The insert is made to go with one of our Level 5 subwoofer enclosures, so order it together with the enclosure. You can also choose it as a step when you build the enclosure on its page.

Will it fit the enclosure I already have?

It fits Level 5 enclosures made after July 17, 2023. If yours is older, call or text 615-610-1413 and we will check it for you.

Can I get a custom emblem?

Yes. Choose "Custom - Contact us" and get in touch with your design idea; the custom price shows when you select it.

Does it light up?

Yes. RGB lighting is included, and you control the colors from your phone.

Which interior color should I choose?

Choose the same interior color as your enclosure, so the insert matches it.

Focal Utopia M 3-Way Plug & Play System

Asked on this part’s own page · 2015-2020 F-150 & 2017-2022 Super Duty
6 questions
Will it fit my truck?

Select your truck at the top of the page: it checks it against our fitment list and tells you whether this kit fits.

It works with the B&O 8-Speaker, Sony and non-amplified factory systems. If your truck takes our newer-generation Utopia M kit, the page takes you straight to it.

Is an amplifier included? What else do I need?

No. This kit is the drivers, the A-pillars, the door adapters, the harness and the sealing parts. It runs 3-way active: tweeter, midrange and mid-bass each need their own amplifier channel and DSP crossover.

The builder on this page adds one of our loaded amp racks, and lets you add rear speakers, a subwoofer and sound treatment. Call or text 615.610.1413 if you want help choosing.

Does my factory audio system matter?

Yes. The builder picks the amp-rack version for your system, and the OEM-style grille is cut to the factory pattern. The kit works with the B&O 8-Speaker, Sony and non-amplified systems.

Not sure what is in your truck? Text us at 615.610.1413 and we will confirm before you order.

Do I need to send you my factory A-pillars?

No. We build every set on new Ford pillar trim with new Ford grab handles, so there is no core to send. Your finished pillars arrive wrapped in Ebony (Black), Gray (with a black handle) or King Ranch (Java), with the grille you picked.

Which grille should I choose?

"Laser Cut Mesh B&O 8-Speaker and Non-Amplified OEM Style" follows the factory pattern. "Laser Cut Mesh Open Design" (a larger open mesh) fits every truck.

How is the kit wired?

Nothing in your truck is cut. On a 3-way kit the speakers do not use the factory speaker connection: each driver is wired to its own amplifier channel through our soldered, heat-shrunk speaker harness.

The new A-pillars replace your factory pillars, and the 8-inch mid-bass come mounted in our door adapters. Closed-cell foam strips seal each speaker to the door panel, and two BlackHole sound-treatment squares come in the kit.

Don’t see your question? 615-610-1413 — a human will answer.

Install

What the install actually involves.

Fully plug-and-play underseat install — pre-tuned DSP, vehicle-specific harnessing, no cutting or splicing. Every component in this package ships together as one complete kit.

TimeA full day
DifficultyModerate
ReversibleYes — except treatment
Owner reviews · real installs

How it holds up once it’s in the truck.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your truck and how you listen — we'll walk you through the packages built for it and exactly what's in each one. No pressure, no upsell.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree — a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support