Underseat Focal K2 Power 9-Channel
Built per truck — select yours
Pre-tuned package family

Underseat Focal K2 Power 9-Channel

We build this package per truck — the amp variant, the components and the price on this page follow the truck you choose.

From $17,449 Final price is your truck’s exact build — select your vehicle.
Talk to a builder · 615-610-1413
5.0★
22 reviews
Checking your vehicle…

Select your truck to see your exact package and price

These packages are built per truck — the components, the amp variant, and the price are specific to your exact vehicle. Tell us what you drive and this page shows the one build we ship for it.

Built for your exact truck Pre-tuned plug & play Hand-built in TN In-house support
The package · Performance tier

How it sounds. In your truck.

Here's what it's great at, what to know before you buy, and where it lands in our lineup.

Tier
Performance
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Seven things we listen for

Hover or tap a measure

Build your complete system.

Your system
The system builder
Build your complete system

Speakers, sub, amp and treatment, priced together.

01 SpeakersPick your truck
02 SubwooferFrom $849.99
03 Amp RackFrom $980
04 Sound TreatmentFrom $797
1 of 4 chosen
Build your system
How we build it

From your platform to your driveway.

Every package is engineered, hand-built, and tuned before it ever ships — so the install is the easy part. All done in-house in Mount Juliet.

STEP 01

Engineered for your platform

We design the whole system around your exact truck — sizes, power, enclosure volume, and fitment, worked out up front.

STEP 02

Hand-built in our shop

Enclosure cut, amp rack loaded and wired, harnesses made — built and inspected by our team in Mount Juliet.

STEP 03

Tuned inside your truck

We measure and tune the system in the real cab with reference gear, so it arrives set for that acoustic space.

STEP 04

Delivered plug-and-play

It ships dialed and labeled, with every part but the adhesive door treatment fully removable. Bolt it in, plug the harnesses, and play.

Straight answers

The questions we hear most.

The questions each component gets asked on its own page — grouped so you can read only the part you care about.

This package

2 questions
What’s included in this package?
  • Plug & Play Focal K2 Power EVO 3-Way Speaker Kit Upgrade Package
  • Gladen-Mosconi ONE 9-Channel Active Loaded Amplifier Rack
  • Sound Treatment Package
  • Custom Focal K2 Dual 10" Down-Firing Sealed Subwoofer Enclosure
  • Choose Your Ford Level 5 Subwoofer Enclosure Insert
  • Gladen-Mosconi ONE Series 9-Channel Active Loaded Amplifier Rack
  • Plug & Play Focal K2 EVO 3-Way Speaker Kit Upgrade Package
  • Sound Treatment Package
Is an amplifier included?

Yes — this package includes its loaded amplifier rack:

  • Gladen-Mosconi ONE 9-Channel Active Loaded Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
  • Gladen-Mosconi ONE Series 9-Channel Active Loaded Amplifier Rack (All Factory Systems including B&O Unleashed)

Plug & Play Focal K2 Power EVO 3-Way Speaker Kit Upgrade Package

Asked on this part’s own page · for 2021+ F150 and 2023+ SuperDuty
7 questions
Will this kit work with my factory B&O system?

Yes. This kit is built for the B&O 8-Speaker, B&O Unleashed, and Non-Amplified factory systems. Select your truck at the top of the page to confirm the fit. A set with the A-pillars comes in three grille styles: Laser Cut Mesh B&O Unleashed OEM Style, Laser Cut Mesh B&O 8-Speaker and Non-Amplified OEM Style, or Laser Cut Mesh Open Design.

Can I buy just the front or just the rear set?

Kits are sold as the full front + rear set. Need just front or rear? Call or text us and we'll set it up.

Do I need to send in my factory A-pillars as a core?

No — no core is required. We supply brand-new OEM pillars, complete with handles, for every build, so your truck stays whole while your kit is being made. The hand-crafted 3-way A-pillars arrive finished in your choice of Ebony (Black) or King Ranch (Java) to match your interior. Watch the video on this page for a closer look at the grille options.

Is an amplifier included with this kit?

No. This kit covers the speaker stage: the Focal K2 Power EVO drivers, the hand-crafted 3-way A-pillars, the custom speaker adapters, and the wiring and sealing touches listed in What's in the Box. It's designed to be driven by outboard amplification and DSP (sold separately) — perfect for owners who want to upgrade in steps. Start with the speaker stage now, then add amplification and the rest of the system when you're ready. Call or text 615.610.1413 and we'll spec the right amp and DSP path for your truck and budget.

What's the difference between the A-pillar grille options?

Three styles are available: Laser Cut Mesh B&O Unleashed OEM Style and Laser Cut Mesh B&O 8-Speaker and Non-Amplified OEM Style mimic the factory pillar look for their respective audio systems, and Laser Cut Mesh Open Design uses the mesh with a more open pattern.

How involved is the installation?

It's built to be plug & play with no cutting of factory wiring. Connections are soldered and heat-shrunk, and the harness ends in a pre-soldered OEM speaker connector that plugs straight into the factory plug. Closed-cell foam strips seal each speaker to the door panel, two 12-inch square 3-layer sound treatment squares seal the adapters to the door metal for proper acoustic isolation, and the finished A-pillars install in place of your factory pillars — no fabrication needed on your end.

How long until my kit ships?

The 3-way A-pillars and speaker adapters are hand-crafted in-house for your color and grille selection, so delivery lead times vary — contact us for current build times. When it does ship, everything is over-packaged to ensure safe arrival.

Gladen-Mosconi ONE 9-Channel Active Loaded Amplifier Rack

Asked on this part’s own page · for Ford 2023+ Super Duty and 2024+ F150 Trucks
6 questions
Can I buy this amp rack by itself, without speakers or subwoofers?

It is sold as a system with front speakers. Choose your truck and your speakers in the builder on this page - our team tunes the rack in-house to those exact speakers before it ships, which is why it is not sold on its own. Already have our speakers from an earlier order? Call or text 615-610-1413.

Which Ford trucks does this fit?

Select your truck at the top of the page to confirm the fit. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Does this work with the factory B&O and B&O Unleashed systems?

Yes. B&O trucks receive the ZEN A2B High-Resolution integration module, which handles factory system integration. Factory B&O customers also receive a Sub Block Off Plate. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

What does "9-channel active" mean?

The rack carries two Gladen-Mosconi ONE Series amplifiers: an 8-channel amplifier with built-in DSP plus a mono-block subwoofer amplifier, for 9 channels and 1720 watts RMS total. Active means the DSP handles the signal processing, and our team tunes it in-house to match the specific speakers and subwoofers in your package.

Is this tuned before it ships?

Yes. Every rack is pre-wired, pre-tuned, and tested in-house by the Sounds Good Stereo team before it leaves our shop. That is also why it has to ship with a full package - the extensive tuning is built around your exact equipment.

What is included for the installation?

Everything ships to your door: the loaded amplifier rack, a vehicle-specific plug-and-play T-harness, a full-length 1/0ga OFC copper power and ground wiring kit, a subwoofer harness with quick-disconnect connectors, and the RTC remote subwoofer level knob.

Sound Treatment Package

Asked on this part’s own page · for 20212026 Ford F-150 & 2023-2026 Super Duty SuperCrew – Block Off Plates, Blackhole MAT & Tiles
10 questions
Which level should I choose?

Choose by the power on your door speakers. Level 1: factory power up to 65 watts RMS per channel. Level 2: 65-150 watts RMS per channel. Level 3: 150 watts RMS per channel and up. Not sure? Call or text 615.610.1413 with your amp and speakers.

What's the difference between the levels?

Every level has the same front and rear block off plates, the screws, and enough MAT for the back wall. Level 1: 6 boxes of Blackhole MAT (66 sq ft) and 18 tiles. Level 2: 5 boxes (55 sq ft) and 72 tiles. Level 3: 4 boxes (44 sq ft) and 144 tiles, 36 in every door. Tiles are the more effective way to control sound inside the door, so as the level goes up they take over the outer skin that Level 1 covers with MAT.

Does it cover the back wall?

Yes. Every level has enough MAT for the four doors and the big flat area of the back wall - about one box of MAT goes on the back wall. Save your offcuts for the plastic door panels so you don't run short.

Will it fit my truck?

Select your truck at the top of the page - the vehicle selector shows whether this kit fits it. The kit works with any factory audio system; there is no wiring. Not sure? Call or text 615.610.1413.

Do I have to drill?

Only for the block off plates: 1/8-inch pilot holes in the door's inner skin. The screws are included; the MAT and the tiles are self-adhesive.

What happens to the factory weather barrier?

It comes out and is not reused, along with any white sound-deadening material over the access hole. The block off plate covers that hole instead.

Do the speakers come out?

Yes. The speaker comes out so the tiles can go behind it - 4 x 7 mm screws on a front door, 3 on a rear door. Put the factory speaker back, or fit aftermarket speakers with a foam ring.

Where do the tiles go?

On the bare metal of the outer door skin inside the door, starting right behind the speaker. Flat surfaces only, about 1/8 to 1/4 inch between tiles so water can drain, and never cut a tile.

My door panel won't clip back on. What now?

Make sure the white sound-deadening material over the access hole is gone, and route the lock cable above the door pocket when you refit the panel. Still stuck? Call or text 615.610.1413.

What do I need that is not in the box?

Your tools: a panel removal tool, a 7 mm socket, a drill with a 1/8-inch bit, a utility knife, a roller, a tape measure, and wax and grease remover or alcohol with a rag. The kit does not include speakers.

Custom Focal K2 Dual 10" Down-Firing Sealed Subwoofer Enclosure

Asked on this part’s own page · for 2009–2026 Ford FSeries SuperCrew Trucks
6 questions
Will this enclosure fit my truck without modifications?

Select your truck at the top of the page and it will show whether this enclosure fits. Where it fits, no seat lift and no modifications to the vehicle are required: it sits under the rear seat in a down-firing configuration.

What subwoofers come in this enclosure?

It ships loaded with two Focal K2 SUB25KXS 10-inch subwoofers, wired to a 2-ohm final impedance. Pair it with an amplifier that is stable at 2 ohms.

Why a sealed, down-firing design?

The sealed design delivers the best sound quality and extra punch in the upper bass response. Like all SGS enclosures, it is designed for in-vehicle acoustical performance — not just fitment — with a sound-quality-first, output-second mentality.

Can I match the enclosure to my truck’s interior?

Yes. Choose from four OEM-match vinyl interior colors: Ebony (Black), Java (King Ranch), Admiral Blue (Limited), and Smoked Truffle (Platinum Plus). Emblem options such as Raptor, Super Duty, and Limited are also available.

How does the included lighting work?

RGB multi-color LED plexi lighting comes standard and is controlled from your mobile phone, so you can set the color to match your build.

Who builds this enclosure?

Every enclosure is hand-made by our award-winning team using premium materials — premium MDF construction finished in high-grade carpet and OEM-match vinyl.

Choose Your Ford Level 5 Subwoofer Enclosure Insert

Asked on this part’s own page
5 questions
Can I buy the insert on its own?

No. The insert is made to go with one of our Level 5 subwoofer enclosures, so order it together with the enclosure. You can also choose it as a step when you build the enclosure on its page.

Will it fit the enclosure I already have?

It fits Level 5 enclosures made after July 17, 2023. If yours is older, call or text 615-610-1413 and we will check it for you.

Can I get a custom emblem?

Yes. Choose "Custom - Contact us" and get in touch with your design idea; the custom price shows when you select it.

Does it light up?

Yes. RGB lighting is included, and you control the colors from your phone.

Which interior color should I choose?

Choose the same interior color as your enclosure, so the insert matches it.

Gladen-Mosconi ONE Series 9-Channel Active Loaded Amplifier Rack

Asked on this part’s own page · (All Factory Systems including B&O Unleashed)
10 questions
Will this amplifier rack work with my truck's factory audio system?

Yes — it supports all factory Ford systems, including B&O 8-Speaker, B&O Unleashed, Sony Amplified, and Non-Amplified setups. Select your truck at the top of the page to confirm the fit. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Can I purchase this rack by itself?

It is sold as a system with front speakers. Choose your truck and your speakers in the builder on this page - our team tunes the rack in-house to those exact speakers before it ships, which is why it is not sold on its own. Already have our speakers from an earlier order? Call or text 615-610-1413.

What amplifiers power this rack?

A Gladen-Mosconi ONE Series 8-channel amplifier with built-in DSP plus a ONE Series mono-block amplifier — 9 channels total delivering 1720 watts of RMS power, running a fully active system.

Does it arrive ready to install?

Yes. Every rack is pre-tuned, pre-wired, and tested in-house by our award-winning team, then over-packaged to ensure safe arrival. It includes everything, shipped to your door.

How does it connect to my truck's factory wiring?

Through a vehicle-specific plug-and-play T-harness. B&O-equipped trucks also use the included ZEN A2B High-Resolution B&O Integration Module, and the subwoofer harness uses quick-disconnect connectors for an easy installation.

How do I pick the right variant?

You do not choose one. Pick your truck on this page and the builder sets the rack to your truck's factory sound system. Not sure which system your truck has? Contact us and we will confirm it before you order.

What happens to my factory B&O subwoofer?

Factory B&O customers receive a Sub Block Off Plate with the rack, and the included subwoofer harness with quick-disconnect connectors handles the new subwoofer wiring.

Where does the rack mount, and do I have to drill?

It is built on our driver-side amplifier rack, which mounts behind the rear seat on the seat-latch bolt and factory threaded holes in the floor, so the rack itself needs no drilling. A factory subwoofer in that spot comes out first.

The power cable kit includes two grommets (IP68 cable glands). They are required, and they seal the holes you drill to bring the power wire into the cab. The mounting feet chart on this page shows where the floor brackets go for each truck.

Does it come with any install tools?

Yes. Every rack ships with our package tool kit, including a pry bar, small flush cutters and foam circles.

What is the difference between the 7- and 9-channel ONE racks?

Both use the same two amplifiers: a Gladen-Mosconi ONE 8|10 DSP and a ONE 1|1000 mono-block for the subwoofer. The 7-channel rack runs an active 2-way front stage on six of the 8|10's channels; the 9-channel rack runs an active 3-way front stage on all eight.

Plug & Play Focal K2 EVO 3-Way Speaker Kit Upgrade Package

Asked on this part’s own page · for 20152020 F-150 and 2017-2022 SuperDuty
7 questions
Can I buy just the front or just the rear set?

Kits are sold as the full front + rear set. Need just front or rear? Call or text us and we'll set it up.

Do I need an amplifier and DSP to run this kit?

Yes. The K2 EVO front stage uses the same 3-way active architecture as our other premium kits for these trucks — the tweeter, midrange, and woofer each want their own amplifier channel with DSP handling crossover and time alignment. Plan on a 6-channel DSP amp (JL VXi, Helix, Mosconi, or Audison AP class) sold separately. Call or text 615.610.1413 and we'll spec the right amp for your build.

Do I need to send in my A-pillars as a core?

No core is required. We supply brand-new OEM pillars with handles for the build, hand-craft them for the 3-way driver set, and ship them ready to install. Choose your interior color — Ebony (Black), Gray w/Black Handle, or King Ranch (Java) — and your grille style at checkout. The video on this page walks through the grille options.

Which trucks does this kit fit?

It works with B&O 8-Speaker, Sony Amplified, or Non-Amplified factory audio. Select your truck at the top of the page to confirm the fit.

How does K2 EVO compare to the Focal Utopia M kit?

Same 3-way active architecture, same hand-crafted pillar and adapter work, different driver family. K2 EVO is Focal's aramid-cone line — a sharp, high-volume signature. Utopia M is the flagship: beryllium tweeters and W-cone midrange, reference-neutral, our most precise system — at roughly $3,000 more for the front stage alone. If you want a sharp, high-volume front stage for less, K2 EVO is the smarter spend; if imaging and detail are the whole point, step up to Utopia M.

What do you include to seal and treat the doors?

Every kit ships with a pair of closed-cell foam strips to seal each speaker to the door panel, and two 12-inch square 3-layer sound treatment squares to seal the adapter to the door metal. That covers the speaker-to-door interface — full-door sound deadening (treating the entire door skin) is a separate product we strongly recommend for a front stage at this level.

Is this really plug and play?

The speaker-side connections are — every speaker lead comes with a pre-soldered OEM connector, so nothing gets cut or spliced into your factory harness, and the adapters and pillars bolt to factory locations. The amplifier, DSP setup, and tune are the part that isn't plug-and-play: those are sold separately and need either confident 12V DIY skills or a professional installer.

Don’t see your question? 615-610-1413 — a human will answer.

Install

What the install actually involves.

Fully plug-and-play underseat install — pre-tuned DSP, vehicle-specific harnessing, no cutting or splicing. Every component in this package ships together as one complete kit.

TimeA full day
DifficultyModerate
ReversibleYes — except treatment
Owner reviews · real installs

How it holds up once it’s in the truck.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your truck and how you listen — we'll walk you through the packages built for it and exactly what's in each one. No pressure, no upsell.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree — a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support