GMC Sierra & Chevrolet Silverado Block Off Plates (2019-2022)
Seal your factory door access holes to reduce road noise and tighten mid-bass - works with factory or aftermarket speakers.
SKU: 1921GMCBlockOffPlatesSet
How can we help finish your build?
Tell us where you are in the build and a builder will help you get the rest of your system dialed in. Your comes along automatically.
Seal the factory opening.
CNC-machined HDPE block off plates designed to seal the factory access panel in your truck's doors. The original openings in the inner door skin allow bass energy to escape and road noise to enter the cabin. Sealing them creates a semi-sealed chamber behind the speaker for tighter bass response and a quieter ride. Works with factory speakers and aftermarket upgrades alike.
Check before you buy
Fits 2019-2021 GMC Sierra 1500, 2019-2021 Chevrolet Silverado 1500, 2020-2022 GMC Sierra HD (2500/3500), and 2020-2022 Chevrolet Silverado HD (2500/3500). All cab configurations for front doors. Rear plates fit Crew Cab only. Does not fit 2022+ 1500 refresh models - see our separate listing. GMC, Sierra, Chevrolet, and Silverado are registered trademarks of General Motors. Used for compatibility reference only. Not sure which system you have? Ask us before you buy.
Full specifications
- Material Thickness
- 1/4-inch
- Mounting Method
- Pre-marked alignment circles - drill 1/8-inch mounting holes
The rest of the route, in one cart.
One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.
Truck owners who want a solid mount for amps and a processor on the rear cab wall, using the factory studs.
20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.
Silverado and Sierra owners who want the best possible speaker mounting platform for their truck
Tap your factory Bose amp's subwoofer signal — no wire cutting.
Zero-splice install harness — clean, reversible wiring with no cut factory connectors.
Zero-splice install harness — clean, reversible wiring with no cut factory connectors.
A pair of plug pigtails with the GM factory 2-pin door-speaker connector. Zero-splice, reversible aftermarket door speaker install on most 2010+ GM trucks and SUVs.
Silverado and Sierra owners installing aftermarket tweeters from a 2-way or 3-way component speaker kit
Kicker's own carpeted truck box with two 12-inch L7T subs installed, made to sit under the rear seat.
Factory-look stealth subwoofer enclosure for the Silverado & Sierra 1500 (2019-Up) — tight, hidden bass built around your JL Audio.
Factory-look stealth subwoofer enclosure for the Silverado & Sierra (2019-Up) — tight, hidden bass built around your JL Audio.
Not all plates are built the same.
A block-off plate lives in your doors and cab walls through heat, cold, and constant vibration — and it gets drilled and bolted in place. Most competitors reach for metal, ABS, expanded PVC, or expanded HDPE; wood is the common DIY shortcut. Here's how each actually behaves where it counts.
| Material | Easy to work with | Holds real weight | Low material cost | Shrugs off moisture |
|---|---|---|---|---|
material sample
What SGS uses
Solid Core USA-Made HDPE
Dense, Non-Porous and Forgiving
| Strong | Strong | High cost | Strong |
material sample
Competitor materialMetal
Heavy, resonates, hard to cut
| Fails | Strong | High cost | Strong |
material sample
Competitor materialExpanded HDPE
Hollow core, weak at bolt holes
| Strong | Fails | Low cost | Fails |
material sample
Competitor materialABS
Rigid but thin and brittle
| Strong | Fails | Low cost | Fails |
material sample
Competitor materialExpanded PVC
Often foamed, brittle when cold
| Strong | Fails | Low cost | Fails |
material sample
DIY build shortcutWood / Plywood
Absorbs moisture, swells, rots
| Strong | Strong | Low cost | Fails |
Built in-house, start to finish.
Every plate is designed, machined, and finished under one roof in Mount Juliet, Tennessee. No outsourcing, no imported blanks — just USA-made HDPE, a CNC machine, and people who care whether it fits right. Here's how a flat sheet becomes a set of plates cut for your platform.
Video · From the shop floor
Solid Core USA-Made HDPE
It starts with a sheet of 100% USA-made HDPE — solid all the way through, the same material trusted in marine and industrial builds. No hollow cores.
Precision CNC Machining
Each set of plates is nested from our own CAD files and cut on our CNC machine. Feeds and speeds are dialed in for HDPE so every edge comes off clean and every alignment mark lands exactly where it should.
Hand-Finished & Inspected
Every plate is deburred and inspected by hand before it's packed. If it wouldn't go in our own truck, it doesn't ship.
Packed to Survive Shipping
Every set is wrapped, boxed, and packed by the same hands that made it — with the mounting screws bagged and the installation guide included, so nothing arrives loose, scratched, or missing.
Everything customers actually ask.
The questions we get most on block-off plates — answered straight. Not sure if yours is here? Call, and a human will answer.
One year, on everything we sell. Every item is covered for one year from delivery. If something fails in that first year, we make it right. Questions about a claim? Call us — a real person handles it with you.
Asked by truck owners
2 answered by our teamNo, they will not
Answered by the SGS team · Mar 2023
So the speaker adapters will work for your Yukon, but from what we can see, the block off plates are different. If you snap a photo behind your door panel, maybe we can confirm if they will work.
Answered by the SGS team · Oct 2021
Line it up, drill it, bolt it in. Pre-marked for you.
Every set ships ready to install at home. The plates carry pre-marked alignment circles — follow the steps for your exact vehicle and grab the tools listed. Stuck? A real tech is one call away.
-
Remove door panel trim and fasteners
-
Remove door panel from clips
-
Disconnect door handle and window switch connectors
-
Remove thin plastic barrier from inner door skin
-
Clean the mounting area with isopropyl alcohol
-
Use the pre-marked alignment circles to center the plate over the access hole
-
Verify no wiring harnesses or lock rods are behind your drill location
-
Drill 1/8-inch mounting holes through the inner door skin only - do not penetrate the outer panel
-
Secure plate with included zinc coated screws - tighten until snug, do not overtighten
-
Repeat for remaining doors
-
Reinstall door panels, reconnect all connectors, and verify window and lock operation
How they hold up once they're installed.
Quality plates! Had a easy experience with installing these on my GMC. Seems to make a big difference in sound and they look great! Thank you for a great experience and I'll be ordering more products soon.
Found these for my 2023 F350 Lariat B&O unleashed system. Following the installation video with flawless fit. I don't think I could have achieved sucess without the video. Shipping and customer service (I did have to contact them) was superb, couldn't be better. After installation, I could clearly hear the improvement to my stock system. I now get to crank it up for Boston and U2 songs.
I’ve had a great experience with Sounds Good Stereo. I purchased their custom enclosure loaded with four JL Audio 8W3s, the power upgrade, sound treatment kit, and their pre-tuned amp rack. I’m extremely happy with the quality of everything and the customer service I’ve received throughout the process.
What really stands out to me is the workmanship and attention to detail. You can tell these guys genuinely have a passion for what they do and take pride in their work. Everything I’ve received has exceeded my expectations. Definitely recommend Sounds Good Stereo!
I ordered these along with the jl audio c1 kit for the front and rear. I only wanted to take the door panels off once so I went ahead and bought these block off plates..they essentially turn your door into an enclosed speaker box and gives you more bass. Also makes your doors feel more solid. Glad I purchased and installed these, I feel they bring out the best of the jl audio c1 kit!
Great way to seal the door enclosures for better sound vs the plastic film installed from factory. The F150 doors sheet metal are not perfectly flat/flush to match the block off plates in certain corners. I used more sound deadening to make a flat surface to eliminate any surfaces not making contact.
Installed these on my truck and they made a world of difference I have been doing my on stereo systems for over 20yrs even had some in competitions and this by far was an easier way to make door speaker sound better would definitely buy again
Awesome product. Very easy to install and fits great. Even the packaging looks top tier. I installed these and used sound deadening inside the door shells while I was replacing all the speakers in my 2022 F150. Drastically improved the sound over factory, the mid bass speakers have excursion now! If you’re replacing speakers and care about sound quality these are a must have. Thanks SG
Ordering was easy and shipping was fast. I watched the videos and followed all the instructions carefully. When putting the door skins back, in my f150 Lightning, they would not snap together. Inspection revealed the recessed part of the plate didn’t align exactly with the high part of the door cover. Tech support had several ideas but was a little slow to respond. Nothing fixed it until cutting off the high part of my door. Expect that you may need to cut or modify your door to make it go back together. Keeping that in mind, it does do a great job of sealing the “box” for your door speakers. Sounds good!!
Great product. Noticeable difference in sound. Perfect fitment, even the screw holes are placed to avoid factory wires and other door/window components. The amp rack is a clean fit. And customer service was quick to response and resolve my issue.
I ordered theses hoping they would help with just over all clarity of the factory Bose speakers. Well it worked, much tighter and distinct Bass and the highs are much clearer now. Only complaint is I REALLY wish they would have sent Self tapping screws instead of just regular screws. Having to Set 2 screws to tighten the panle down so its contoured to the door, then mark every hole, remove the 2 screws, pre-drill every hole, then put the pnl back up and install the screws was VERY annoying. The screws are much to long in my opinion as well. 1/4 in. Self tapping screws would have been perfect. There is no quality or detail skipped on these panels, I added some expandable weather stripping under the rear panels because of how the door is designed it leaves quite a bit of metal under the blocker plate and I didnt want that to possibly rattle, also a piece is needed between the window motor and door panel as it will rattle as the door flexes. I also wish they would have sent some flush plugs for the holes that are left open after removing the factory dust liner. Just seems like something that should be included to help seal the door off even more.
Great fit and very solid thick dense plastic very well made had to order the rears too.
Although its an amazing product I think one of the problems I had is when I was putting the front door panels back on it wouldn't quite fit exactly right other then that it did what I said it would but I wouldn't go out bragging that it blocks of road noise but it does reduce like 30% also I had to add a gasket on to the back side to help it seal better because the door itself had a lot of curves like protruding Inword and make the flat surface of the block off plate kind of useless what I did to help with the flex is left the plate on the dash to heat it up to give the plates more flex so it can mold more better to the door but to be honest its not worth the $200 price tag and in the end I should have just went with just regular sound deadening ro covor it and that might just solved my problem with the door panels and sound quality
Will these fit a 2017 Silverado? Or do you make any that will. I didn’t see any on the website.
No, they will not
Not sure what'll fit? Just call.
Tell us your vehicle and which openings you're closing off — we'll confirm the right plates before you order. No pressure, no upsell.











material sample
material sample
material sample
material sample
material sample
material sample