Loaded Amp Rack$3,560
Ten87 Mosconi amp rack with Focal interface and wiring harnesses for 2019+ GMC and Chevy Bose trucks

Mosconi-Gladen Loaded Subwoofer 2500wrms Amplifier Rack for 2019+ GMC/Chevy BOSE Trucks

5.0 · 22 reviews
Mosconi PRO 2/30 ampPlugs into the Bose ampBolts to factory studsPre-tuned in-houseMosconi remote sub control

Mosconi-Gladen subwoofer-and-amp rack — bolt-in 2500W RMS, fits factory systems with no fabrication.

$3,560
Shipping calculated at checkout
What's included
  • Mosconi-Gladen PRO 2/30 2500W RMS 2-Channel Amplifier
  • Mosconi-Gladen Subwoofer Remote Level Control
  • Ten87 Design Custom Made Amplifier Rack
  • Bose Plug and Play T-Harness
  • Full-Length Power + Ground 1/0ga OFC Copper Wiring Kit
  • Subwoofer Harness with Quick Disconnect Connectors
or
Top questions 7 answered
See all 7 questions
Questions? Text us at 615-610-1413

SKU: PP-Loaded-1xPRO230-GMC

Fits your vehicle In-house support
The rack · Audiophile tier

How it performs. In your truck.

Our score for this rack, and how it rates on the four things we judge every amplifier rack on.

Tier
Audiophile
Amplifier power
1650 W RMS
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Four things we rate

Hover or tap a measure
Loaded subwoofer amplifier rack

The details.

Add audiophile-grade, factory-integrated bass to your truck's factory Bose system without cutting a single factory wire. This loaded amplifier rack pairs the Mosconi-Gladen PRO 2/30 2-channel amplifier — 2500 watts RMS at 1 ohm — with a Bose plug-and-play T-harness, a subwoofer remote level control, and a full-length 1/0ga OFC copper wiring kit, all pre-wired and pre-tuned in-house by the Sounds Good Stereo team. It is designed to drive your own subwoofers and enclosure; select your truck at the top of the page to confirm the fit.

Full specifications

Factory Integration
Bose Plug and Play T-Harness
Dimensions
30" W x 21" H
Weight
50 lb
Amplifier System
Mosconi-Gladen PRO 2/30 2-Channel Audiophile Grade
RMS Power Output
2500W RMS @ 2-ohm bridged / 1650W RMS @ 4-ohm
Bass Control
Mosconi-Gladen Subwoofer Remote Level Control
Power Wiring
Full-Length Power + Ground 1/0ga OFC Copper
Amplifier Rack
Ten87 Design Custom Made Amplifier Rack (Wide style)
Factory Audio
GMC/Chevy BOSE factory systems, including Ultimate-AT4X
Fitment
2019-2026 Chevrolet Silverado & GMC Sierra 1500, 2020-2026 Silverado HD & Sierra HD (Crew Cab, BOSE)
Tuning
Pre-tuned and tested in-house by the Sounds Good Stereo team
Loaded racks for your vehicle

Compare loaded subwoofer racks.

Common questions

Everything customers actually ask.

The questions we get most on loaded amplifier racks - answered straight. Not sure if yours is here? Call, and a human answers.

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Step by step for your vehicle.

Where install steps exist for your exact part, they're below - with the tools you'll need.

DifficultyModerateTime~4 hr
Install walkthrough video — Mosconi-Gladen Loaded Subwoofer 2500wrms Amplifier Rack for 2019+ GMC/Chevy BOSE Trucks
Full walkthrough
How to Install a Loaded Subwoofer & Amp Rack | GMC Sierra / Chevy Silverado | Ten87 DesignInstall walkthrough.
Written steps
  1. Remove the three rear headrests and the six headrest retainers.

  2. Remove the four 10 mm bolts at the bottom of the seat back, release the three latches at the top with a hook tool, and lift the seat back out.

  3. Take the inverter and the parking-sensor module off the rear wall (10 mm nuts); they can stay plugged in.

  4. Slide the rack onto the factory studs, then mount the inverter and module back on top of it with the factory nuts.

  5. Unplug the top connector on the factory Bose amp and plug the T-harness in between.

  6. Connect the power wire, with its fuse, at the positive battery terminal and the ground to the negative terminal.

  7. Route both wires to the back of the cab and bring them in through two holes in the floor on the passenger side, sealed with the included glands.

  8. Connect power and ground at the amp and plug in the subwoofer lead.

  9. Mount the Mosconi remote sub control up front and run its cable to the rack.

  10. Test the system before the seat back goes in, then reinstall the seat back.

Owner reviews - real installs

How they hold up once they're installed.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and factory system - we'll confirm the right loaded rack before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
$3,560Loaded Subwoofer Amp Rack