Amplifier Rack$145No-drill, bolt-in mounting
Compact Amplifier Rack/Plate/Board - Compatible with 2015-2024 Ford F-Series Truck

2015-2026 Ford F-Series Compact Amplifier Rack | No-Drill Factory Fit

4.7 · 20 reviews
CNC MachinedUSA-Made HDPECompact 12 InchesNo Drilling RequiredBolts to 3 factory points

Compact 12-inch driver-side mount. Same SGS quality, smaller footprint.

$145
Shipping calculated at checkout
What's included
  • CNC Machined Compact Driver-Side HDPE Amplifier Rack
  • 3x 6061 Aluminum Mounting Brackets
  • 2x LDPE Floor Spacers
  • 2x M8 30mm Hex Head Bolts (Zinc Coated)
  • 8x POH34-AB Screws
or
Top questions 7 answered
See all 7 questions
Questions? Text us at 615-610-1413

SKU: FD-Amp-Compact

Fits your truck No-drill fit Hand-built in TN In-house support
Amplifier rack

The details.

The compact version of our Ford driver-side rack: the same mounting system, trimmed down to 12 inches wide. Use it when you only need space for a single compact amp or DSP and want to keep the rest of the area behind the seat open.

Check before you buy

If your truck has a factory subwoofer behind the rear seat, it comes out, and its opening needs our block-off plate (sold separately); on B&O trucks the factory amp bracket comes out too. Questions? Call or text 615-610-1413.

Full specifications

Mounting Location
Driver side
Mounting Method
No drilling
Mount Points
3 factory
Rack Size
12″ × 17.8″
Material
1/2-in HDPE
Factory Audio
All systems
Brand
Ten87 Design
Sold As
Rack + kit
Your DIY route

The rest of the route, in one cart.

One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.

Power & Ground Kit
Full Length Power and Ground Power Cable Kit (Designed for 2015+ Vehicles)

20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.

From$175
Quick view
Speaker Adapters
Ford 6x8 to 6.5-inch Speaker Adapter | CNC-Machined HDPE Size Converter

Owners of Ford, Lincoln, Mazda, and Mercury vehicles with factory 6x8-inch oval speakers upgrading to 6.5-inch round aftermarket drivers

$56
Quick view
Wiring & Harnesses
Ford B&O Subwoofer Harness – Add an Amp & Sub, Fix or Keep the Bass Roll-Off (2018-2026 F-150, Super Duty, Ranger)

Add a sub amp to Ford B&O — fix the bass roll-off with a pre-set KEYLOC, or keep it and save.

From$41
Quick view
Tweeter Adapters
2015-2022 Ford F-150 & Super Duty Tweeter Adapters | Laser-Cut to Your Tweeter

F-150 and Super Duty owners installing aftermarket tweeters from a 2-way or 3-way component speaker kit

$36
Quick view
Block-Off Plates
Sub Enclosure
Stealth Passenger-Side Loaded Behind-the-Seat Sub Enclosure with Compact Amp Rack – 2015-2023 F-150 & 2017-2022 Super Duty SuperCrew

Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.

From$985
Quick view
Why material matters

Not all amp racks are built the same.

An amp rack lives behind your seat through heat, cold, and constant road vibration — and you're drilling into it to mount heavy gear. Most competitors reach for metal, ABS, expanded PVC, or expanded HDPE; wood is the common DIY shortcut. Here's how each actually behaves where it counts.

MaterialEasy to work withHolds real weightLow material costShrugs off moisture
Solid Core USA-Made HDPE material sample
What SGS uses Solid Core USA-Made HDPE Dense, Non-Porous and Forgiving
StrongStrongHigh costStrong
Metal material sample
Competitor materialMetal Heavy, resonates, hard to cut
FailsStrongHigh costStrong
Expanded HDPE material sample
Competitor materialExpanded HDPE Hollow core, weak at bolt holes
StrongFailsLow costFails
ABS material sample
Competitor materialABS Rigid but thin and brittle
StrongFailsLow costFails
Expanded PVC material sample
Competitor materialExpanded PVC Often foamed, brittle when cold
StrongFailsLow costFails
Wood / Plywood material sample
DIY build shortcutWood / Plywood Absorbs moisture, swells, rots
StrongStrongLow costFails
StrongFails
How it's made

Built in-house, start to finish.

Every rack is designed, machined, and finished under one roof in Mount Juliet, Tennessee. No outsourcing, no imported blanks — just USA-made HDPE, a CNC machine, and people who care whether it fits right. Here's how a flat sheet becomes a rack that drops into your truck.

Video · From the shop floor Video · From the shop floor
Solid Core USA-Made HDPE
Stage 01

Solid Core USA-Made HDPE

It starts with a sheet of 100% USA-made HDPE — solid all the way through, the same material trusted in marine and industrial builds. No hollow cores.

Precision CNC Machining
Stage 02

Precision CNC Machining

Each rack is nested from our own CAD files and cut on our CNC machine. Feeds and speeds are dialed in for HDPE so every edge comes off clean and every mounting hole lands exactly where it should.

Hand-Finished & Inspected
Stage 03

Hand-Finished & Inspected

Every rack is deburred, checked, and test-fit by hand before it's packed. If it wouldn't go in our own truck, it doesn't ship.

Packed to Survive Shipping
Stage 04

Packed to Survive Shipping

Every rack is wrapped, boxed, and packed by the same hands that built it — with the hardware bagged and labeled, so nothing arrives loose, scratched, or missing.

Common questions

Everything customers actually ask.

The questions we get most on amp racks — answered straight. Not sure if yours is here? Call, and a human will answer.

Don't see your question?
A human answers — no bots, no queues.
615-610-1413
Install it yourself

Step by step for your vehicle.

Every rack ships ready to install at home in an afternoon. Follow the steps for your exact truck and grab the tools listed — most are in a basic toolbox. Stuck? A real tech is one call away.

DifficultyEasyTime~30 minDrilling0 holes drilledTools2 tools
Install walkthrough video — 2015-2026 Ford F-Series Compact Amplifier Rack | No-Drill Factory Fit
Full walkthrough
Ford F-150 Behind the Seat Stereo Package InstallationStep-by-step video for your exact truck.
Tools you'll need
13mm Deep Well Socket
10mm Socket
No specialty tools required — everything here is in a basic socket set.
Written steps
  1. Flip down the rear seat on the driver side

  2. Remove the factory subwoofer if your truck is equipped with one

  3. Remove the factory B&O amplifier bracket on vehicles with B&O audio

  4. Position the top bracket in front of the seat latch bracket

  5. Place the HDPE spacer between the floor and the bottom bracket

  6. Secure the rack to the factory mounting points using the included hardware

  7. Mount your amplifier to the rack and connect your wiring

Owner reviews · real installs

How it holds up once it’s in the truck.

Write a review
4.7/ 5
20 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your truck and the amps, DSP, and distribution you're mounting — we'll spec the right size rack, or build one to order for any layout. No pressure, no upsell.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree — a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
$145No-drill fit · Amp Rack