Loaded Amp RackFrom $1,940
Choose options · $1,940
Arc Audio amplifier on a shaped black rack panel with fuse holders, harnesses and power wiring for Ford Super Duty and F-150

Arc Audio Loaded Subwoofer 1100wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks

5.0 · 22 reviews
1,100 W RMS @ 1 ohmPre-tuned in-housePlug-in harnessRemote bass control

Arc Audio X2 1100.1 mounted, pre-wired and pre-tuned on our rack. Plugs into your factory audio; you add the subwoofer.

From $1,940
Shipping calculated at checkout
Choose your options Required
Choose your options
Your selection includes
  • Arc Audio X2 1100W RMS Mono-Block Amplifier
  • Arc Audio Subwoofer Remote Level Control
  • Kicker KeyLOC Integration Device
  • Two Fused Distribution Blocks with Fuses
  • Ten87 Design Custom Made Amplifier Rack
  • Vehicle-Specific Plug and Play T-Harness
  • Full-Length Power + Ground 4ga OFC Copper Wiring Kit
  • Subwoofer Harness with Quick Disconnect Connectors
  • Sub Block Off Plate (B&O variants)
Top questions 7 answered
See all 7 questions
Questions? Text us at 615-610-1413
Fits your vehicle In-house support
The rack · Performance tier

How it performs. In your truck.

Our score for this rack, and how it rates on the four things we judge every amplifier rack on.

Tier
Performance
Amplifier power
1100 W RMS
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Four things we rate

Hover or tap a measure
Loaded subwoofer amplifier rack

The details.

Add serious, factory-integrated bass to your truck without cutting a single factory wire. This loaded amplifier rack pairs the Arc Audio X2 mono-block amplifier — 1100 watts RMS at 1 ohm — with a vehicle-specific plug-and-play T-harness, Kicker KeyLOC factory integration, and a full-length 4ga OFC copper wiring kit, all pre-wired and pre-tuned in-house by the Sounds Good Stereo team. Compatible with every factory system including B&O Unleashed, it drives your own subwoofer and enclosure to resolve the bass roll-off in these trucks.

Full specifications

Amplifier System
Arc X2 1100.1
RMS Power Output
1,100 W @ 1Ω
2-Ohm Output
600 W RMS
Factory Integration
Plug-in
Bass Control
Remote level
Power Wire
4 AWG OFC
Mounting Location
Driver side
Factory Audio
B&O or base
Loaded racks for your vehicle

Compare loaded subwoofer racks.

Common questions

Everything customers actually ask.

The questions we get most on loaded amplifier racks - answered straight. Not sure if yours is here? Call, and a human answers.

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Step by step for your vehicle.

Where install steps exist for your exact part, they're below - with the tools you'll need.

DifficultyModerateTime~4 hr
Written steps
  1. Fold down the rear seat backs; the seats do not need to come out.

  2. On B&O trucks, take the factory subwoofer out from behind the driver-side seat.

  3. Find the floor threads for the feet (they can be under the carpet and a square of tape), screw the feet into the slots for your truck from the mounting feet chart, and bolt the rack down with a spacer under each foot.

  4. Bolt the top bracket to the seat-latch bracket, in front of it.

  5. On B&O trucks, pre-drill 1/8-inch holes and screw the block-off plate over the factory subwoofer opening, cork side toward the hole.

  6. On B&O trucks, find the factory amplifier behind the carpet panel on the back wall toward the passenger side, unplug the one connector the T-harness matches, plug the T-harness in between, and leave the amplifier's other plugs connected.

  7. On trucks without B&O, plug the dash harness in at the radio and run the extension harness back to the rack along the driver side.

  8. Run power and ground from the battery down to the frame rail, back along it, and into the cab through two 3/4-inch floor holes sealed with the included glands.

  9. Connect the ground at the battery, on the battery side of the factory battery sensor, and the power wire with its inline fuse.

  10. Connect power and ground to the distribution blocks on the rack and plug in the subwoofer lead.

  11. Run the Arc Audio remote level control cable forward if you want it within reach, test the system, then fold the seat backs up.

Owner reviews - real installs

How they hold up once they're installed.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and factory system - we'll confirm the right loaded rack before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
From $1,940Loaded Subwoofer Amp Rack
Choose options