2021+ Ford Bronco Dash / Rear Pod / Center Channel Plug Harness (Pair)

What it covers on your Bronco

This pair of OFC copper pigtails plugs into the factory speaker connectors at the smaller Bronco speaker positions — giving you bare leads to terminate to your aftermarket drivers without cutting a single factory wire.

• Front dash tweeters (driver + passenger)
• Rear roof pods (driver + passenger)
• Center-channel (B&O trim only — same connector as the dash tweeters)

Works on both the Non-Amplified and B&O 8-Speaker factory systems in the 2021+ Bronco.

Also fits Ford F-Series factory tweeter wiring — but check your plug first

The same connector style is used at the tweeter positions on certain Ford F-Series builds. However, Ford uses two different small connectors at those positions across the lineup — a black housing and a gray housing — and we can't tell you which one your specific truck has without seeing it.

Before you order: pop your A-pillar (or wherever the tweeter lives), unplug the factory tweeter, and look at the color of the plastic housing on the factory harness side. If it matches the color of the connector on this harness, you're good. If it doesn't, you need our other tweeter harness instead.

Not sure which one you've got? Text a close-up photo of the plug to 615.610.1413 — we'll confirm the match in 60 seconds before you order.

Why use this over cutting factory wires

• Zero-splice. Factory wiring stays 100% intact — no cuts behind the pillar trim or roof liner.
• Reversible in 30 seconds. Unplug the harness, drop the factory driver back in if you ever trade the truck.
• Cleaner finish. No butt connectors hidden behind trim that could rattle or fail in a year.
• Same OFC copper we use in every SGS build.

Sold as a pair — one pair = one axis (L + R). Full Bronco tweeter + rear-pod replacement = 2 pairs. Add center channel if B&O and you want to run that too = 3 pairs.