Loaded Amp RackFrom $2,800
Choose options · $2,800
Ten87 amp rack with Mosconi amplifier and factory amp mount for Ford 2023+ Super Duty and 2024+ F-150

Mosconi-Gladen Loaded Subwoofer 975wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks

5.0 · 22 reviews
975 W RMS @ 2 ohmsPre-tuned in-housePlug-in harnessRemote sub control

Mosconi-Gladen subwoofer-and-amp rack for Super Duty & F-150 — bolt-in 975W RMS, fits factory systems with no fabrication.

From $2,800
Shipping calculated at checkout
Choose your options Required
Choose your options
Top questions 8 answered
See all 8 questions
Questions? Text us at 615-610-1413
Fits your vehicle In-house support
The rack · Performance tier

How it performs. In your truck.

Our score for this rack, and how it rates on the four things we judge every amplifier rack on.

Tier
Performance
Amplifier power
975 W RMS
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Four things we rate

Hover or tap a measure
Loaded subwoofer amplifier rack

The details.

Experience superior sound quality with the Mosconi-Gladen Loaded Subwoofer 975wrms Amplifier Rack designed for your truck. With a powerful 975wrms amplifier and compatibility with all factory systems, including B&O Unleashed, enhance your listening experience while on the road. Upgrade your audio with Mosconi-Gladen.

The Mosconi-Gladen PRO Series 975wrms Loaded Subwoofer Rack "Ingredients":

Electronics:
 - Mosconi-Gladen PRO 1/10 975wrms Mono-Block Audiophile Grade Amplifier
 - Mosconi-Gladen Subwoofer Remote Level Control

Custom Made In-House Components:
 - Ten87 Design Custom Made Amplifier Rack
 - Vehicle Specific Plug and Play T-Harness
 - Full-length Power + Ground 4ga OFC Copper Wiring Kit
 - Subwoofer harness with quick disconnect connectors
 - Subwoofer block-off plate (B&O trucks)

Additional Touches:
 - Pre-tuned and Tested In-House by the Sounds Good Stereo Team
 - Over-packaged to ensure safe arrival

Full specifications

Amplifier System
PRO 1|10
RMS Power Output
975 W RMS
4-Ohm Output
670 W RMS
Integration
Kicker KEYLOC
Pre-Tuned Signal
Yes
Power Wire
4 AWG OFC
Mounting Location
Driver side
Factory Audio
B&O or base
Loaded racks for your vehicle

Compare loaded subwoofer racks.

Common questions

Everything customers actually ask.

The questions we get most on loaded amplifier racks - answered straight. Not sure if yours is here? Call, and a human answers.

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Step by step for your vehicle.

Where install steps exist for your exact part, they're below - with the tools you'll need.

DifficultyModerateTime~4 hr
Written steps
  1. Fold down the rear seat backs; the seats do not need to come out.

  2. On B&O trucks, take the factory subwoofer out from behind the driver-side seat.

  3. Find the floor threads for the feet (they can be under the carpet and a square of tape), screw the feet into the slots for your truck from the mounting feet chart, and bolt the rack down with a spacer under each foot.

  4. Bolt the top bracket to the seat-latch bracket, in front of it.

  5. On B&O trucks, pre-drill 1/8-inch holes and screw the block-off plate over the factory subwoofer opening, cork side toward the hole.

  6. On B&O trucks, find the factory amplifier behind the carpet panel on the back wall toward the passenger side, unplug the one connector the T-harness matches, plug the T-harness in between, and leave the amplifier's other plugs connected.

  7. On trucks without B&O, plug the dash harness in at the radio and run the extension harness back to the rack along the driver side.

  8. Run power and ground from the battery down to the frame rail, back along it, and into the cab through two 3/4-inch floor holes.

  9. Connect the ground at the battery, on the battery side of the factory battery sensor, and the power wire with its inline fuse.

  10. Connect power and ground to the distribution blocks on the rack, plug in the subwoofer lead, and plug in the LED-light lead if your enclosure has lights.

  11. Run the Mosconi remote sub control cable forward if you want the control within reach, test the system, then fold the seat backs up.

Owner reviews - real installs

How they hold up once they're installed.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and factory system - we'll confirm the right loaded rack before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
From $2,800Loaded Subwoofer Amp Rack
Choose options