Loaded Amp Rack$1,640
Arc Audio amp on a Ten87 Design rack with interface module, harnesses and power wiring for 2019+ GMC/Chevy BOSE trucks

Arc Audio Loaded Subwoofer 1100wrms Amplifier Rack for 2019+ GMC/Chevy BOSE Trucks

5.0 · 22 reviews
1,100 W RMS @ 1 ohmPlugs into the Bose ampBolts to factory studsPre-tuned in-houseRemote bass control

Arc Audio X2 1100.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory Bose amp; you add the subwoofer.

$1,640
Shipping calculated at checkout
What's included
  • Arc Audio X2 Series 1100W RMS Mono-Block Amplifier
  • Arc Audio Subwoofer Remote Level Control
  • Ten87 Design Custom Made Amplifier Rack
  • Bose Plug and Play T-Harness
  • Full-Length Power + Ground 4ga OFC Copper Wiring Kit
  • Subwoofer Harness with Quick Disconnect Connectors
or
Top questions 7 answered
See all 7 questions
Questions? Text us at 615-610-1413

SKU: PP-Loaded-Arc-GMC-1100

Fits your vehicle In-house support
The rack · Performance tier

How it performs. In your truck.

Our score for this rack, and how it rates on the four things we judge every amplifier rack on.

Tier
Performance
Amplifier power
1100 W RMS
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Four things we rate

Hover or tap a measure
Loaded subwoofer amplifier rack

The details.

Add serious, factory-integrated bass to a truck with the factory Bose system — without cutting a single factory wire. This loaded amplifier rack pairs the Arc Audio X2 Series mono-block amplifier — 1100 watts RMS at 1 ohm — with a Bose plug-and-play T-harness, a full-length 4ga OFC copper wiring kit, and a quick-disconnect subwoofer harness, all pre-wired and pre-tuned in-house by the Sounds Good Stereo team. Just add your 1-ohm subwoofer package and it handles the most technical part of the upgrade for you.

Full specifications

Amplifier System
Arc X2 1100.1
RMS Power Output
1,100 W @ 1Ω
2-Ohm Output
600 W RMS
Factory Audio
Bose only
Factory Integration
T-harness
Pre-Tuned Signal
Yes
Power Wire
4 AWG OFC
Mounting
OEM studs
Loaded racks for your vehicle

Compare loaded subwoofer racks.

Common questions

Everything customers actually ask.

The questions we get most on loaded amplifier racks - answered straight. Not sure if yours is here? Call, and a human answers.

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Step by step for your vehicle.

Where install steps exist for your exact part, they're below - with the tools you'll need.

DifficultyModerate
Install walkthrough video — Arc Audio Loaded Subwoofer 1100wrms Amplifier Rack for 2019+ GMC/Chevy BOSE Trucks
Full walkthrough
How to Install a Loaded Subwoofer & Amp Rack | GMC Sierra / Chevy Silverado | Ten87 DesignInstall walkthrough.
Written steps
  1. Remove the three rear headrests and the six headrest retainers.

  2. Remove the four 10 mm bolts at the bottom of the seat back, release the three latches at the top with a hook tool, and lift the seat back out.

  3. Take the inverter and the parking-sensor module off the rear wall (10 mm nuts); they can stay plugged in.

  4. Slide the rack onto the factory studs, then mount the inverter and module back on top of it with the factory nuts.

  5. Unplug the top connector on the factory Bose amp and plug the T-harness in between.

  6. Connect the power wire to the 13 mm bolt beside the positive battery terminal and the ground to the negative terminal; the fuse is already inline in the power wire.

  7. Route both wires to the back of the cab and bring them in through two 3/4-inch holes in the floor on the passenger side, sealed with the included glands.

  8. Connect power and ground at the amp, plug in the subwoofer lead, and plug in the LED-light lead if your enclosure has LED lights.

  9. Mount the Arc Audio remote level control up front (most owners put it below the steering column) and run its cable to the rack.

  10. Test the system before the seat goes back in, trim the seat-back foam where it touches the amp, then reinstall the seat back.

Owner reviews - real installs

How they hold up once they're installed.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and factory system - we'll confirm the right loaded rack before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
$1,640Loaded Subwoofer Amp Rack