Tweeter Adapters$36Laser-cut Solid Acrylic
Choose options · $36
Custom Laser Cut Tweeter Adapters - 30mm - Compatible with Select 2021+ Ford F-150 Vehicles (Pair) - 30mm

2021-2026 Ford F-150 Non-Amplified Tweeter Adapters | Laser-Cut to Your Tweeter

4.63 · 76 reviews
Laser-Cut AcrylicNon-B&O OnlyExact MM PrecisionFactory LocationMade in USASold as Pair

For non-amplified (non-B&O) 2021+ F-150, Expedition, Lightning, and Super Duty

$36
Shipping calculated at checkout
Choose your options Required
By tweeter
Choose a brand

Pick a brand above to see its sizes.

Not Sure? Add This
Your selection includes
  • 1x Pair of laser-cut acrylic tweeter adapters, cut to your selected tweeter size or brand
  • Tweeters not included. Mounts in the factory tweeter location - no drilling.
Top questions 11 answered
See all 11 questions
Questions? Text us at 615-610-1413

The one measurement that matters

Find your tweeter's flush-mount diameter.

This is the single number our adapter is cut to. It's the diameter of the mounting flange — the lip that sits against the panel — not the size of the dome you see. Get it from the manual, or measure it in 30 seconds.

  • Overall width
  • Mounting-flange diameter — the one number we cut the adapter to
  • Total height
  • Mounting depth
A B C D PANEL

Easiest · 9 times out of 10

Look it up in the manual

Almost every tweeter spec sheet lists it — look for “mounting diameter,” “flush-mount Ø,” or “cutout diameter” — often the dimension labeled B on the spec drawing. It's printed in the included manual and on the manufacturer's product page. That number is what you give us.

No spec sheet? · 30 seconds

Measure it yourself

Flip the tweeter over and lay a ruler or calipers across the back of the mounting flange (dimension B) — the flat lip that presses against the panel. Measure straight across the widest point, in millimeters. Ignore the dome in the middle entirely.

Don't measure the dome. A “1-inch tweeter” describes the driver, not how it mounts — the mounting flange is almost always larger. Two same-size tweeters from different brands can have completely different flush-mount diameters. The flange is the only number that fits the adapter.

Then choose it under Choose Your Tweeter Size above, or switch to the By cutout size (mm) tab. Our adapters are cut from 32 to 51 mm.

Pick your size above
Fits your vehicle Solid Acrylic Laser-cut in Mount Juliet, TN In-house support
Why you need it

Built for the factory location.

This adapter is designed specifically for the non-amplified factory system - laser-cut to the exact millimeter for the factory tweeter location.

Check before you buy

NON-AMPLIFIED (non-B&O) vehicles ONLY. If your truck has the Bang & Olufsen Unleashed system, you need a different adapter. Pre-cut for Focal, JL Audio, Kicker, Mosconi-Gladen, and Audiofrog. All brand names are trademarks of their respective owners and are used for compatibility reference only. Not sure which system you have? Ask us before you buy.

Full specifications

Cut Method
Laser-cut
Factory Audio
Non-B&O only
Install Location
OEM tweeter
Tweeter Sizes (mm)
32, 35-51
Pre-Cut for Brands
5 brands
Mounting Method
OEM hardware
Sold As
One pair
Your DIY route

The rest of the route, in one cart.

One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.

Amp Rack
2015-2026 Ford F-Series Driver Side Amplifier Rack | No-Drill Factory Fit

Mounting amplifiers, a processor and distribution behind the driver-side rear seat: it bolts to three factory points, with no drilling.

$197
Quick view
Power & Ground Kit
Full Length Power and Ground Power Cable Kit (Designed for 2015+ Vehicles)

20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.

From$175
Quick view
Speaker Adapters
Ford 6x8 to 6.5-inch Speaker Adapter | CNC-Machined HDPE Size Converter

Owners of Ford, Lincoln, Mazda, and Mercury vehicles with factory 6x8-inch oval speakers upgrading to 6.5-inch round aftermarket drivers

$56
Quick view
Wiring & Harnesses
Ford B&O Subwoofer Harness – Add an Amp & Sub, Fix or Keep the Bass Roll-Off (2018-2026 F-150, Super Duty, Ranger)

Add a sub amp to Ford B&O — fix the bass roll-off with a pre-set KEYLOC, or keep it and save.

From$41
Quick view
Block-Off Plates
Sub Enclosure
Stealth Passenger-Side Loaded Behind-the-Seat Sub Enclosure with Compact Amp Rack – 2015-2023 F-150 & 2017-2022 Super Duty SuperCrew

Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.

From$985
Quick view
How it's made

Built in-house, start to finish.

Every adapter is designed and laser-cut under one roof in Mount Juliet, Tennessee. No outsourcing, no imported blanks - just solid acrylic, a laser, and people who care whether it fits right. Here's how a flat sheet becomes a pair of adapters cut to your exact speaker size.

Video - From the shop floor Video - From the shop floor
Solid Acrylic
Stage 01

Solid Acrylic

Every pair starts as a sheet of solid acrylic - flat, dense stock that holds a clean, precise edge, sized for the exact cutout your speaker needs.

Laser-Cut to Your Size
Stage 02

Laser-Cut to Your Size

Each pair is laser-cut from our own files to your selected millimeter size - or pre-cut for brands like Focal, JL Audio, Kicker, Mosconi-Gladen, and Audiofrog - so your new speaker drops into the factory location.

Checked & Paired
Stage 03

Checked & Paired

Every adapter is checked against its cutout size and paired before it's packed. If it wouldn't go in our own truck, it doesn't ship.

Packed to Survive Shipping
Stage 04

Packed to Survive Shipping

Each pair is wrapped and packed by the same hands that cut it, so nothing arrives loose, scratched, or missing - and there's no extra hardware to lose, because the adapters mount with your factory hardware.

Common questions

Everything customers actually ask.

The questions we get most on tweeter adapters - answered straight. Not sure if yours is here? Call, and a human answers.

Asked by truck owners

1 answered by our team

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Swap them in. Factory hardware, no drilling.

Every pair ships ready to install. The adapters mount with the factory hardware - follow the steps for your vehicle.

DifficultyEasyTime~15 minDrilling0 holes drilledTools2 tools
Tools you'll need
Trim removal tool
Phillips screwdriver
A trim removal tool and a screwdriver cover most vehicles.
Written steps
  1. Remove factory trim panel covering tweeter location

  2. Remove factory tweeter from mounting location

  3. Place laser-cut acrylic adapter over factory mounting points

  4. Secure adapter with factory hardware

  5. Mount aftermarket tweeter into the adapter

  6. Connect tweeter wiring

  7. Reinstall trim panel

  8. Repeat on the other side

Owner reviews - real installs

How they hold up once they're installed.

Write a review
4.63/ 5
76 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and the tweeters you're running - we'll confirm the right size before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
$36Solid Acrylic - Tweeter Adapters
Choose options