Gladen-Mosconi PRO Series 3-Way Active Kit
A fast, dynamic, honest German studio voicing — kick drums and bass lines you feel in your chest. 6.5" mid-bass, 3" mid-range and 25mm tweeter in Ten87 hand-crafted A-pillars, pre-wired for a no-cut install.

- Gladen-Mosconi PRO Series 6.5-inch mid-bass speakers
- Gladen-Mosconi PRO Series 3-inch mid-range speakers and 25mm tweeters
- Ten87 hand-crafted 3-way A-pillars built on new Ford OEM pillars with grab handles - your selected color and grille style (no core required)
- Pre-soldered OEM speaker connectors - soldered and heat-shrunk
- Closed-cell foam strips to seal each speaker to the door panel
How can we help finish your build?
Tell us where you are in the build and a builder will help you get the rest of your system dialed in. Your comes along automatically.
How it sounds. In your truck.
Here's what it's great at, what to know before you buy, and where it lands in our lineup.
- Tier
- Audiophile
- Voicing
- Fast, German
- Recommended power
- 100–150 W RMS / channel
- Essential
- Performance
- Audiophile
- Flagship
The highest-scoring kit we'll put in any truck without a second thought. It gives up a hair of outright detail to the Reference and Flagship kits — and beats both on mid-bass and on value.
Seven things we listen for
Hover or tap a measure-
The chest-hit from the doors. The PRO 165 mid-bass is the standout — the cleanest, hardest punch we measure in these trucks.
-
Fine detail in full view — breath, fingers on strings, the air around each instrument.
-
Passes the recording through without coloring it. You hear the mix, not the speakers.
-
Natural body through the lower mids. Honest, not hyped — never thin, never bloated.
-
Snaps to the leading edge of every note. Fast and German-voiced — drums and plucked strings sound alive.
-
High-efficiency drivers that turn clean amplifier power straight into clean volume.
-
Stays easy on the ears over a long drive — revealing without ever turning harsh.
- 01Mid-bass you feel in your chest — kick drums and bass lines.
- 02Fast, dynamic and honest — a German studio voicing that reveals the recording instead of dressing it up.
- 03High efficiency, so it stays composed and clean at volume without leaning hard on the amp.
- 01Fully active — it makes no sound on the factory amp. It needs an aftermarket multichannel amplifier and a real DSP tune to work at all.
- 02It is revealing. A weak amp or a lazy tune will show — which is exactly why we build and tune the rack for it.
- 03It is a step up in spend from the Focal K2. You are paying for the mid-bass and the dynamics.
Build your complete system.
Front Speakers
Your front stage — confirm your truck and this step shows the exact kit we build for it.
Select your truck and this step confirms the exact kit we build for it — right drivers, right pillars, right harness.
We can’t confirm this kit for your truck.
The kit we have on file for your truck doesn’t match what’s on the product right now, so we’ve stopped here rather than show you one that might be wrong for your cab. Nothing has been added to your cart.
Change your truck to try another, or get in touch and we’ll confirm the right kit with you.
Get in touch →
Focal Flax EVO 3-Way Kit
- Great at
- Ten87 hand-crafted 3-way A-pillars
- System
- 3-way active
- Mid-bass punch7.0
- Attack6.0
- Transparency8.0
- Resolution8.0
- Warmth5.0
- Efficiency8.0
- Listener fatigue lower is better3.0

Gladen-Mosconi PRO Series 3-Way Active Kit
- Voicing
- Fast, German
- Great at
- Fast, dynamic and honest
- System
- 3-way active
- Mid-bass punch9.0
- Attack7.0
- Transparency8.0
- Resolution8.5
- Warmth8.0
- Efficiency6.0
- Listener fatigue lower is better2.0
- Voicing Fast, German

Focal K2 EVO 3-Way Active Kit
- Voicing
- Sharp, high-volume
- Great at
- Upgrading in steps
- System
- 3-way active
- Mid-bass punch6.0
- Attack7.0
- Transparency8.0
- Resolution7.0
- Warmth5.0
- Efficiency9.0
- Listener fatigue lower is better4.0
- Voicing Sharp, high-volume

JL Audio C7 3-Way Active Kit
- Voicing
- Effortless
- Great at
- Efficiency
- System
- 3-way active
- Mid-bass punch8.0
- Attack6.0
- Transparency7.0
- Resolution6.0
- Warmth7.5
- Efficiency6.0
- Listener fatigue lower is better2.0
- Voicing Effortless
What’s in the box
Finish
Everything in your build is made to order — choose how each part looks. Nothing is pre-selected.
Rear Speakers
Recommended is what your package ships with. The other cards show the price difference.
We can’t confirm the right version of this component for your truck.
What’s shown below is the general product, not the version matched to your cab — so this step is on hold rather than let you order a part that may not fit.
Get in touch →
Gladen-Mosconi RS Series 2-Way Kit
- Speakers
- Mosconi-Gladen RS 2-way coaxials
- System
- 2-way passive
- Connection
- Pre-soldered OEM speaker connector
Subwoofer
Recommended is what your package ships with. The other cards show the price difference.
We can’t confirm the right version of this component for your truck.
What’s shown below is the general product, not the version matched to your cab — so this step is on hold rather than let you order a part that may not fit.
Get in touch →
Stealth V2 Driver-Side Loaded Enclosure
- Subwoofers
- Two 6.5" (pre-loaded)
- Enclosure Type
- Vented (ported)
- Mounting Location
- Behind the Seat, driver side

Passenger-Side Loaded Enclosure
- Subwoofers
- Loaded, subwoofers installed
- Enclosure Type
- Vented
- Mounting Location
- Behind the Seat, passenger side

Stealth Passenger-Side Loaded Enclosure
- Subwoofers
- Ten87 Design 6.5" series (included)
- Enclosure Type
- Vented
- Mounting Location
- Behind the Seat

Kicker L7T Custom-Fit · Two 10-inch
- Subwoofers
- Two 10-inch Kicker L7T
- Enclosure Type
- Down-firing
- Mounting Location
- Under Seat

JL Audio Stealthbox · Two 12-inch
- Subwoofers
- Two 12-inch JL 12TW3
- Enclosure Type
- Sealed
- Mounting Location
- Under Seat

JL Audio Stealthbox Subwoofer Enclosure for 2015-Up Ford SuperCab Trucks
- Enclosure Type
- Sealed
- Subwoofers
- 1x JL 10TW3
- Power Handling
- 400 W RMS
- Impedance
- 2 ohms
- Wire Connection
- Terminal cup

Ten87 Design · Four 6.5-inch
- Enclosure Type
- Vented, down-firing
- Mounting Location
- Under Seat
- Build
- Hand-crafted in Mount Juliet, TN

Kicker L7T · Three 10-inch
- Enclosure Type
- Sealed, down-firing
- Mounting Location
- Under Seat
- Build
- Hand-crafted in Mount Juliet, TN

JL Audio TW3 · Three 10-inch
- Enclosure Type
- Sealed, down-firing
- Mounting Location
- Under Seat
- Build
- Hand-crafted in Mount Juliet, TN

JL Audio TW3 · Two 10-inch
- Enclosure Type
- Sealed, down-firing
- Mounting Location
- Under Seat
- Build
- Hand-crafted in Mount Juliet, TN

Focal K2 Power · Two 10-inch
- Enclosure Type
- Sealed, down-firing
- Mounting Location
- Under Seat
- Build
- Hand-crafted in Mount Juliet, TN

Focal Utopia M · Two 10-inch
- Enclosure Type
- Sealed, down-firing
- Mounting Location
- Under Seat
- Build
- Hand-crafted in Mount Juliet, TN

Custom Arc Audio Dual 10" Down-Firing Sealed Subwoofer Enclosure for 2009–2026 Ford F-Series SuperCrew Trucks
- Subwoofers
- Dual Arc Audio 10"
- Enclosure Type
- Sealed, down-firing
Amp Rack
Recommended is what your package ships with. The other cards show the price difference.
We can’t confirm the right version of this component for your truck.
What’s shown below is the general product, not the version matched to your cab — so this step is on hold rather than let you order a part that may not fit.
Get in touch →
Gladen-Mosconi PICO 9-Channel Active Amp Rack
- Channels
- 9
- Total Power
- 1020 watts RMS
- DSP
- Built into PICO 8-channel amp

Gladen-Mosconi PICO 9-Channel Active Amp Rack
- Channels
- 9 (8-ch DSP amp + mono-block)
- Total Power
- 1020 watts RMS
- DSP
- Built into PICO 8-channel amp

JL Audio VXi 9-Channel Active Amp Rack
- Channels
- 9 (3-way active)
- Total Power
- 1850W RMS
- DSP
- Built into all 3 amps + VXi-HUB

Gladen-Mosconi PRO 10-Channel Active Amp Rack
- Channels
- 10 (8-ch main + 2-ch sub)
- Total Power
- 3,040 watts RMS
- DSP
- Built into PRO 8-channel amp

JL Audio VXi 9-Channel Active Amp Rack
- Channels
- 9 (3-way active)
- Total Power
- 1,850 watts RMS
- DSP
- Built into all 3 amps + VXi-HUB

Gladen-Mosconi PRO 10-Channel Active Amp Rack
- Channels
- 10
- Total Power
- 3,040 watts RMS
- DSP
- Built into PRO 8-channel amp

Gladen-Mosconi ONE 7-Channel Active Amp Rack
- Channels
- 7 (6 active + mono-block)
- Total Power
- 1960W RMS
- DSP
- Built into ONE Series amplifier

Gladen-Mosconi ONE 9-Channel Active Amp Rack
- Channels
- 9
- Total Power
- 1720 watts RMS
- DSP
- Built into ONE 8-channel amp

Gladen-Mosconi ONE 9-Channel Active Amp Rack
- Channels
- 9 (8-channel + mono-block)
- Total Power
- 1720 watts RMS
- DSP
- Built into ONE 8-channel amp

Gladen-Mosconi ONE 7-Channel Active Amp Rack
- Channels
- 7 (6 + mono-block)
- Total Power
- 1,960 watts RMS
- DSP
- Built into ONE Series amplifier

Gladen-Mosconi PICO 7-Channel Active Amp Rack
- Channels
- 7
- Total Power
- 860 watts RMS
- DSP
- Built into PICO 6-channel amp

Gladen-Mosconi PICO 7-Channel Active Amp Rack
- Channels
- 7
- Total Power
- 860 watts RMS
- DSP
- Built into PICO 6-channel amp

JL Audio VXi 2-Way 5-Channel Amp Rack
- Channels
- 5 (2-way)
- Total Power
- 900W RMS
- DSP
- Built into VX1000/5i amp

JL Audio VXi 2-Way 5-Channel Amp Rack
- Channels
- 5 (2-way)
- Total Power
- 900 watts RMS
- DSP
- Built into VX1000/5i amp

Kicker KEY 2-Way 5-Channel Amp Rack
- Channels
- 5 (2-way)
- Total Power
- 700 watts RMS
- DSP
- Built into KEY200.4 (Auto-Tune)

Kicker KEY 2-Way 5-Channel Amp Rack
- Channels
- 5 (2-way)
- Total Power
- 700 watts RMS
- DSP
- Built into KEY200.4 (Auto-Tune)
Sound Treatment
Recommended is what your package ships with. The other cards show the price difference.
We can’t confirm the right version of this component for your truck.
What’s shown below is the general product, not the version matched to your cab — so this step is on hold rather than let you order a part that may not fit.
Get in touch →
Level 1
- 6 boxes of Blackhole MAT (66 sq ft)
- 18 Blackhole Tiles, 4 x 3 x 1.5 in
- Front and rear block off plates (solid-core USA-made HDPE) with mounting screws
- Choose this if: factory power up to 65 W RMS per channel

Level 2
- 5 boxes of Blackhole MAT (55 sq ft)
- 72 Blackhole Tiles, 4 x 3 x 1.5 in
- Front and rear block off plates (solid-core USA-made HDPE) with mounting screws
- Choose this if: 65-150 W RMS per channel

Level 3
- 4 boxes of Blackhole MAT (44 sq ft)
- 144 Blackhole Tiles, 4 x 3 x 1.5 in
- Front and rear block off plates (solid-core USA-made HDPE) with mounting screws
- Choose this if: 150 W RMS per channel and up

Level 1
- 6 boxes of Blackhole MAT (66 sq ft)
- 18 Blackhole Tiles, 4 x 3 x 1.5 in
- Front and rear block off plates (solid-core USA-made HDPE) with mounting screws
- Choose this if: factory power up to 65 W RMS per channel

Level 2
- 5 boxes of Blackhole MAT (55 sq ft)
- 72 Blackhole Tiles, 4 x 3 x 1.5 in
- Front and rear block off plates (solid-core USA-made HDPE) with mounting screws
- Choose this if: 65-150 W RMS per channel

Level 3
- 4 boxes of Blackhole MAT (44 sq ft)
- 144 Blackhole Tiles, 4 x 3 x 1.5 in
- Front and rear block off plates (solid-core USA-made HDPE) with mounting screws
- Choose this if: 150 W RMS per channel and up

Level 1
- 6 Boxes BlackHole MAT (66 sq ft total)
- 18 BlackHole Tiles (4" x 3" x 1.5")
- Block Off Plates — Front & Rear Set (CNC HDPE)
- Best for: Factory speakers & basic amplifier power

Level 2
- 5 Boxes BlackHole MAT (55 sq ft total)
- 72 BlackHole Tiles (4" x 3" x 1.5")
- Block Off Plates — Front & Rear Set (CNC HDPE)
- Best for: Systems up to 90W RMS per speaker

Level 3
- 4 Boxes BlackHole MAT (44 sq ft total)
- 144 BlackHole Tiles (4" x 3" x 1.5")
- Block Off Plates — Front & Rear Set (CNC HDPE)
- Best for: Ultimate road noise reduction & systems up to 1,000W RMS per speaker

Level 1
- 6 Boxes BlackHole MAT (66 sq ft total)
- 18 BlackHole Tiles (4" x 3" x 1.5")
- Block Off Plates — Front & Rear Set (CNC HDPE)
- Best for: Factory speakers & basic amplifier power

Level 2
- 5 Boxes BlackHole MAT (55 sq ft total)
- 72 BlackHole Tiles (4" x 3" x 1.5")
- Block Off Plates — Front & Rear Set (CNC HDPE)
- Best for: Systems up to 90W RMS per speaker

Level 3
- 4 Boxes BlackHole MAT (44 sq ft total)
- 144 BlackHole Tiles (4" x 3" x 1.5")
- Block Off Plates — Front & Rear Set (CNC HDPE)
- Best for: Ultimate road noise reduction & systems up to 1,000W RMS per speaker
Build Time
Good, fast, cheap — pick two. Good comes standard. You choose the speed.
Regular Hours
The steady pace of hand-built.
Many Late Nights
Same build. The crew stays late.
All Hands on Deck
Same build. Overtime, front of the line.
Same crew, same quality on every tier. Changes or special add-ons can add time. Questions? Contact us.
Priority and Rush are placed on your account — you’ll sign in or create a free account when you add it to your cart. Standard needs no account.
Your System
Check your picks, then add it to your cart.
Buy some parts now, reserve the rest — no deposit.
Speakers, sub, amp and treatment, priced together.
The rest of the route, in one cart.
One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.
Finish your bass, in one cart.
The other parts of the Fix the Bass route that fit your truck. Open any of them to choose its options and add it to your cart without leaving this page.
The rest of the system, in one cart.
The other parts of a full system that fit your truck. Open any of them to choose its options and add it to your cart without leaving this page.
Mounting amplifiers, a processor and distribution behind the driver-side rear seat: it bolts to three factory points, with no drilling.
Owners who need one compact amp or a DSP on the driver side without taking up the whole area behind the rear seat.
Owners running a 5-channel amp or micro amplifiers who want a clean, secure mount behind the rear seat.
Mounting a compact amplifier or processor behind the passenger-side rear seat, with no drilling and the factory subwoofer left in place.
2015-2026 Ford F-150 and Super Duty SuperCrew owners who want a hidden, clean amp install in the underseat storage area. Not for trucks with Pro Power Onboard.
For owners who need the whole back wall: 53.8 inches for several amplifiers, with room behind for distribution blocks, relays or a DSP.
20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.
Add a sub amp to Ford B&O — fix the bass roll-off with a pre-set KEYLOC, or keep it and save.
A pair of factory 2-pin plug pigtails with bare OFC copper leads. Plug-and-crimp aftermarket speaker install with zero factory wire cuts.
Takes the place of the rear B&O amp and hands your amplifiers six clean analog channels.
Plug-in T-harness for 2021+ Ford non-amplified factory stereos. Hand-built in Nashville with OFC copper, soldered 4-channel Straight Wire RCA tips, and fully reversible installation.
Plug-in T-harness for 2015-2020 Ford F-Series and other pre-2021 non-amplified Fords. Hand-built in Nashville with OFC copper, soldered 4-channel Straight Wire RCA tips, and fully reversible installation.
SGS-built plug-in harness that connects a Kicker KEYLOC module to your Ford B&O factory amp output. Pick the variant that matches your factory subwoofer shape — YMM will auto-select if your vehicle is in our database.
A pair of OFC copper pigtails with Ford's small BLACK tweeter / mid-range factory connector. Check your own plug color before ordering — black = this product, gray = different SKU.
Plug-in dash-side harness that gives you access to the speaker wires running to the factory rear-door speakers on 2021-2023 F-150 B&O Unleashed trucks. Connect your amp output at the dash instead of splicing door wires.
Zero-splice install harness — clean, reversible wiring with no cut factory connectors.
2025+ Ford A²B stereo interface — now works on all Broncos (including non-B&O). Burr-Brown DAC up to 192 kHz. Same engine as the ZEN-A2B Plus.
Closing the factory access holes behind your door speakers
Closing the factory access holes behind your door speakers
Trucks with B&O audio - required when removing the factory subwoofer
2009-2014 F-150 SuperCrew and SuperCab front door speaker upgrades
2015-2020 F-150 SuperCab and 2017-2022 Super Duty SuperCab door speaker upgrades
2018-2023 Ford Expedition and Expedition Max door speaker upgrades - all trims and audio packages
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.
Kicker's own carpeted truck box with two 10-inch L7T subs installed, made to sit under the rear seat.
Two 6.5-inch subs in a ported box behind the rear seat — for your own amp, and the seat still folds up.
Genuine JL Audio Stealthbox: two 12-inch TW3 subs in a sealed box that bolts in under the rear seat.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat. Bring your own amp.
Custom-fit subwoofer enclosure for the Ford F-Series (2009–2026) — tight, hidden bass built around your Arc Audio.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.
Kicker's own carpeted truck box with two 10-inch L7T subs installed, made to sit under the rear seat.
Two 6.5-inch subs in a ported box behind the rear seat — for your own amp, and the seat still folds up.
Genuine JL Audio Stealthbox: two 12-inch TW3 subs in a sealed box that bolts in under the rear seat.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat. Bring your own amp.
Custom-fit subwoofer enclosure for the Ford F-Series (2009–2026) — tight, hidden bass built around your Arc Audio.
JL Audio RD1500/1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Kicker CXA1200.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Kicker CXA1200.1 sub amp rack, pre-wired and pre-tuned in-house, with the plug-in interface for B&O, Sony or base factory audio.
JL Audio RD1000/1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
JL Audio subwoofer-and-amp rack for Ford F-Series — bolt-in 1500W RMS, fits factory systems with no fabrication.
JL Audio RD1000/1 pre-wired on our rack. Plugs into your factory audio; you add the subwoofer.
Arc Audio X2 1100.1 sub amp, pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Kicker subwoofer-and-amp rack for Ford F-Series — bolt-in, fits factory systems with no fabrication.
Kicker subwoofer-and-amp rack for Ford F-Series — bolt-in, fits factory systems with no fabrication.
Arc Audio X2 1100.1 mounted, pre-wired and pre-tuned on our rack. Plugs into your factory audio; you add the subwoofer.
Kicker CXA1800.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Kicker CXA1800.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory audio; you add the subwoofer.
Mosconi-Gladen subwoofer-and-amp rack for Super Duty & F-150 — bolt-in 1200W RMS, fits factory systems with no fabrication.
Mosconi-Gladen subwoofer-and-amp rack for Super Duty & F-150 — bolt-in 975W RMS, fits factory systems with no fabrication.
Mosconi-Gladen subwoofer-and-amp rack for Ford F-Series — bolt-in 975W RMS, fits factory systems with no fabrication.
Mosconi-Gladen subwoofer-and-amp rack for Ford F-Series — bolt-in 1200W RMS, fits factory systems with no fabrication.
Truck owners upgrading their speakers or quieting their doors and back wall.
Truck owners upgrading their speakers or quieting their doors and back wall.
Truck owners upgrading speakers or reducing road noise in 2015-2020 F-150 and 2017-2022 Super Duty SuperCab trucks.
Expedition owners upgrading speakers or reducing road noise in 2018-2023 Ford Expedition and Expedition MAX.
JL Audio full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
JL Audio full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Gladen-Mosconi full-range amp rack — bolt-in, powers your full system with a factory-clean install.
JL Audio full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
JL Audio full-range amp rack for Ford F-Series — bolt-in, powers your full system with a factory-clean install.
Kicker full-range amp rack for Ford F-Series — bolt-in, powers your full system with a factory-clean install.
Kicker full-range amp rack for Super Duty & F-150 — bolt-in, powers your full system with a factory-clean install.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.
Kicker's own carpeted truck box with two 10-inch L7T subs installed, made to sit under the rear seat.
Two 6.5-inch subs in a ported box behind the rear seat — for your own amp, and the seat still folds up.
Genuine JL Audio Stealthbox: two 12-inch TW3 subs in a sealed box that bolts in under the rear seat.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat. Bring your own amp.
Custom-fit subwoofer enclosure for the Ford F-Series (2009–2026) — tight, hidden bass built around your Arc Audio.
Truck owners upgrading their speakers or quieting their doors and back wall.
Truck owners upgrading their speakers or quieting their doors and back wall.
Truck owners upgrading speakers or reducing road noise in 2015-2020 F-150 and 2017-2022 Super Duty SuperCab trucks.
Expedition owners upgrading speakers or reducing road noise in 2018-2023 Ford Expedition and Expedition MAX.
Get it as part of a package
This package ships with this part.
Built here. Down to the plug.
We hand-craft the vehicle-specific parts in our Mount Juliet shop so the whole front stage drops in where the factory speakers were. Nothing universal, nothing pulled off a shelf.
This is not a bundle. It's a solution.
We don't chase every car on the road — we build front stages for the handful of trucks we know inside out, and we've built thousands. We start with reference 3-way drivers from Gladen in Germany, then hand-craft everything that makes them fit your truck: the A-pillars, the speaker adapters, and the no-cut harness. What ships isn't a box of parts to figure out — it's a complete, plug-and-play kit, built for your exact truck, not adapted to it.
From order to doorstep
Five steps, every one done in-house. Here's exactly what happens after you hit build.
-
01Build confirmation
We lock in the details that decide your fit: your exact truck, your factory audio system, and the finish options your kit is built to match.
-
02Materials staged
The vehicle-specific parts for your build — pillars, adapters, and harness components — are pulled and staged for your truck's configuration.
-
03Hand-crafting
The vehicle-specific pieces are hand-crafted and finished in-house in our Mount Juliet shop, built for your exact truck — nothing universal.
-
04Wiring and sealing
Connections are soldered and heat-shrunk — no cutting of factory wiring — and each speaker is sealed for proper acoustics.
-
05Over-packed and shipped
Your finished kit is deliberately over-packaged to ensure safe arrival, with everything labeled for the install.
What arrives. And what doesn't.
- 2 ×Included: Gladen-Mosconi PRO Series 6.5in Mid-BassPre-wired and mounted to the HDPE door adapters
- 2 ×Included: 3in Mid-RangeA-pillar mounted — pulls the soundstage up onto the dash
- 2 ×Included: 25mm TweeterA-pillar mounted
- 1 ×Included: Ten87 Hand-Crafted 3-Way A-PillarsPair, built on new Ford OEM pillars with grab handles — no core required. Your color + grille choice
- 2 ×Included: HDPE Speaker AdaptersPremium HDPE — mid-bass arrives pre-wired and mounted
- 1 ×Included: Pre-Soldered OEM Speaker ConnectorSoldered + heat-shrunk connections — no-cut installation
- 1 ×Included: Door Sealing KitClosed-cell foam strips seal each speaker to the door panel; two 12in 3-layer sound treatment squares seal the adapters to the metal door
- DSP amplifierRequiredThis 3-Way Active kit is designed to be driven by a DSP amp; most buyers pair it with one of our Gladen-Mosconi loaded amplifier racks
- DSP tuning sessionYours or your installer's
- Power / ground / RCA cablingFrom the amplifier to the harness
- Subwoofer and sub amplifierThis is a front-stage kit — no bass included
- Full-door sound deadeningTwo 3-layer treatment squares for the adapters are included; full coverage sold separately
- Professional installationAvailable separately
- System Type
- 3-way front speaker kit — 3-Way Active configuration
- Mid-Bass
- Gladen-Mosconi PRO Series 6.5-inch
- Midrange
- Gladen-Mosconi PRO Series 3-inch
- Tweeter
- Gladen-Mosconi PRO Series 25mm
- A-Pillars
- Ten87 hand-crafted 3-way A-pillars, built on new Ford OEM pillars with grab handles (no core required)
- Speaker Adapters
- Ten87 Design custom-made premium HDPE adapters — speakers arrive pre-wired and mounted
- Connection
- Pre-soldered OEM speaker connector; soldered + heat-shrunk connections for a no-cut installation
- Door Sealing
- Closed-cell foam seals speaker to door panel; two 12-inch square 3-layer sound treatment squares seal each adapter to the metal door
- Interior Color Options
- Ebony (Black), Gray w/Black Handle, King Ranch (Java)
- Grille Options
- Laser Cut Mesh (B&O 8-Speaker / Non-Amplified OEM style), Laser Cut Mesh Open Design
- Fitment
- 2015-2020 Ford F-150 (SuperCab, SuperCrew) / 2017-2022 Super Duty (Regular Cab, SuperCab, SuperCrew) / 2018-2023 Expedition
- Factory Audio
- B&O 8-Speaker, Sony Amplified, or Non-Amplified
- Made In
- Handcrafted in Mount Juliet, TN
Straight answers, no runaround.
The questions we get most on interior speaker kits — answered straight. Not sure if yours is here? Call, and a human will answer.
One year, on everything we sell. Every item is covered for one year from delivery. If something fails in that first year, we make it right. Questions about a claim? Call us — a real person handles it with you.
How it holds up once it’s in the truck.
Really impressive kit. I am rarely impressed, but this is an impressive kit. The A-Pillars are a must. The sound is so clear and crisp now. Highly recommend. Video shows factory vs. new ones to show contrast.
Wow! I’ve been building boxes for over 20 years, and doing my own installs. This time I wanted something that just looked better for this new truck. After doing a lot of research, I found Sounds Good Stereo. Don and the team here just have such a strong reputation, after seeing this set up I knew it was what I wanted.
Don and his team are extremely knowledgeable on exactly how to build the right box for the cabins in these trucks. Case in point, they test everything in house, send it tuned for the trucks. The cabin gain, frequency’s you should expect, amount of sound quality, power requirements, everything, Don can tell you exactly what to expect… and answer any questions about what you need based off your listening to.
I will never buy any part of my sound system from anywhere else, got a customer here for life! I can’t wait to continue to expand my system through Don and his team. I’ve got four kids that will be driving these trucks as well, that’s four more sound systems that will be through here, not even a second guess. I can’t wait!
Don’t hesitate, you won’t be disappointed. Install is so quick and easy with all the wiring perfectly and professionally prepared. Literally just plug and play!
Couldn't be happier installing this setup into my 24 Sierra 1500, the box seems to be tuned perfectly for the setup I got (w3v3 ported 10s) and the install couldn't be easier. These guys know their stuff
Had this system installed by SGS. I am super impressed!! They did an exceptional job on the install. The amazing attention to detail is superb! The sound is absolutely amazing!! No matter what kind music it is from Country, R&B, Rock, Contemporary, etc. The sound deadening material in the doors and back wall is a game changer! Love the underseat enclosure insert with tunable lighting! Major shoutouts to Sage and Nathan for a great install! Wish I could give more than 5 stars!! If you have a late model F150, I definitely recommend SGS for a stereo upgrade!
Received my kit in about 2.5 weeks (1.5 weeks earlier than expected). Watched a few of their YouTube videos and it took me about 5 hours with also sound deadening the back wall. I absolutely love this kit. Such a clean install and I didn't realize how many songs have low notes that I never knew existed. Anytime I called with questions, they were very informative, polite, and professional. Highly recommend! A++
Received my kit in about 2.5 weeks (1.5 weeks earlier than expected). Watched a few of their YouTube videos and it took me about 5 hours with also sound deadening the back wall. I absolutely love this kit. Such a clean install and I didn't realize how many songs have low notes that I never knew existed. Anytime I called with questions, they were very informative, polite, and professional. Highly recommend! A++
I ordered a K2 plug in play system and it sounds amazing! Every detail of the system was perfectly in order when it arrived and packed up like pros. The quality of the pillars look and sound amazing. If you didn't know what a Raptor pillar looks like you would think it is stock. Listening to the tune on the system it is very evident that these guys know exactly what they are doing! I wouldn't want another shop to tune this system. The followup has been great as well. I'm located on the other side of the country and Sounds good stereo is emailing me asking if they can help with anything additional or make any tweaks to the system from a wifi connection. I wouldn't hesitate to order from them again or make them my go to!
These guys thought of everything! System is truly plug & play. They even supply a pry tool and nippers for the zip ties. The fabrication work is 2nd to none, top qualityand the end result is nothing short of amazing!! I installed the system myself after watching their two install videos. I did it over the course of about 3 weeks; starting with the doors/door speakers, then wiring, then A-pillars, amp board, and sub box. If you’ve working around a vehicle before, and make sure you have the proper tools (again, detailed in the video), everything should go relatively smoothly. Regarding the sub dial, I choose to install it next to the lights switch assembly (see attached pic) but it was purely personal preference. If you’re on the fence about purchasing this system…do it! You will not be disappointed.
I sent my pride and joy Whipple supercharged 2021 F150 to the boys in Nashville and they did an incredible job on my custom sub enclosure along with an entire sound quality build. They matched the A pillars and Sub enclosure with same leather as the seats .
Don, Sage and the rest of the crew did an amazing job assembling and installing the products on my truck. I cannot say enough about the craftsmanship and effort on my project.
The quality and craftsmanship that went into building this is unbelievable!! I am beyond satisfied with it!! To top it off the guys at Sounds Good Stereo were beyond friendly and very helpful with everything. I had my truck shipped from San Diego, Ca. for the system to be installed. I even flew out there to visit the shop while they were working on my truck. These guys are awesome!!!
The pinnacle of mid-bass. Does it get any better? Add a Utopia sub to go with these along with Utopia mids/tweeters and you have reached paradise.
These guys are amazing to work with. I have a 2023 Ram TRX and was not happy with the factory sound system. I did a lot a research and talked to a few shops locally - not impressed. I talked to Sage and Don over the phone and email, and they put together a system for my TRX. I scheduled the appointment and made the drive to TN. They had my truck for a week. When it was done all I can say is wow. There are instruments in songs that I never heard before. The sound is crisp and clear. I now have even a bigger smile on my face when I drive it. This system involved replacing all speakers with Mosconi speakers and amps, sub enclosure, sound proofing the doors and tuning. These guys go above and beyond to knock it out the park. Thank you!
Can not say enought about this company! from day 1 with questions and answers, friendly and fast! great packaging and what an amazing system that they built! well worth the wait!!! hats off and thank you for a great system! def earned my business and will be recomending friends and family! thank you!
The communication, speed of manufacturing and delivery all exceeded my expectations. Any issues encountered were rapidly made right and every question answered. The products themselves especially the A pIllars are better than OEM. Thank you for all the support and quality sounds!
Very good sound, clear, loud and lots of Bass
Sage and the team did an amazing job on my truck. The craftsmanship is better than factory. Words can’t describe the sound. This is the best sounding car stereo I have ever heard. Thank you !
Thank you so much for everything. All I can say is WOW! I finished the install today, and I'm very impressed with the product you, and your team provide. The packaging was superb, the installation videos were spot on, and the sound quality is top notch. I was a little skeptical about the amount of bass I would get from the four 6.5" subwoofers in an under seat box, but you guys nailed it! Definitely worth the wait and I can't wait to show it off to all my friends.
Not sure what you need? Just call.
Made it this far and still have questions? Get us on the phone. We'll walk you through what fits your truck, what each part does, and exactly what you need — in plain English. No pressure.



























































