Behind-the-Seat Gladen-Mosconi PRO Series 9-Channel
Built per truck — select yours
Pre-tuned package family

Behind-the-Seat Gladen-Mosconi PRO Series 9-Channel

We build this package per truck — the amp variant, the components and the price on this page follow the truck you choose.

From $12,992 Final price is your truck’s exact build — select your vehicle.
Talk to a builder · 615-610-1413
4.97★
86 reviews
Checking your vehicle…

Select your truck to see your exact package and price

These packages are built per truck — the components, the amp variant, and the price are specific to your exact vehicle. Tell us what you drive and this page shows the one build we ship for it.

Built for your exact truck Pre-tuned plug & play Hand-built in TN In-house support
The package · Audiophile tier

How it sounds. In your truck.

Here's what it's great at, what to know before you buy, and where it lands in our lineup.

Tier
Audiophile
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Seven things we listen for

Hover or tap a measure

Build your complete system.

Your system
The system builder
Build your complete system

Speakers, sub, amp and treatment, priced together.

01 Front SpeakersPick your truck
02 SubwooferFrom $849.99
03 Amp RackFrom $980
04 Sound TreatmentFrom $797
1 of 4 chosen
Build your system
How we build it

From your platform to your driveway.

Every package is engineered, hand-built, and tuned before it ever ships — so the install is the easy part. All done in-house in Mount Juliet.

STEP 01

Engineered for your platform

We design the whole system around your exact truck — sizes, power, enclosure volume, and fitment, worked out up front.

STEP 02

Hand-built in our shop

Enclosure cut, amp rack loaded and wired, harnesses made — built and inspected by our team in Mount Juliet.

STEP 03

Tuned inside your truck

We measure and tune the system in the real cab with reference gear, so it arrives set for that acoustic space.

STEP 04

Delivered plug-and-play

It ships dialed and labeled, with every part but the adhesive door treatment fully removable. Bolt it in, plug the harnesses, and play.

Straight answers

The questions we hear most.

The questions each component gets asked on its own page — grouped so you can read only the part you care about.

This package

2 questions
What’s included in this package?
  • Gladen-Mosconi PRO Series Plug & Play Speaker Kit Upgrade
  • Gladen-Mosconi RS Series Plug & Play 2-Way Speaker Kit Upgrade
  • Gladen-Mosconi 9-Channel PICO Active Loaded Amplifier Rack
  • "Stealth V2" Behind-the-Seat Loaded Sub Enclosure Only – 2024-2026 F-150 & Lightning, 2023-2026 Super Duty SuperCrew
  • Sound Treatment Package
  • Gladen-Mosconi 9-Channel PICO Active Loaded Amplifier Rack
  • Stealth Passenger-Side Loaded Behind-the-Seat Sub Enclosure, No Amp Rack – 2015-2023 F-150 & 2017-2022 Super Duty SuperCrew
  • Gladen-Mosconi PRO Series Plug & Play 3-Way Speaker Kit Upgrade
  • Sound Treatment Package
Is an amplifier included?

Yes — this package includes its loaded amplifier rack:

  • Gladen-Mosconi 9-Channel PICO Active Loaded Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
  • Gladen-Mosconi 9-Channel PICO Active Loaded Amplifier Rack (All Factory Systems including B&O Unleashed)

Gladen-Mosconi PRO Series Plug & Play Speaker Kit Upgrade

Asked on this part’s own page · Designed for 2021+ F-150 and 2023+ SuperDuty
6 questions
Will this kit work with my factory B&O system?

Yes. This kit is built for the B&O 8-Speaker, B&O Unleashed, and Non-Amplified factory systems. Select your truck at the top of the page to confirm the fit. A set with the A-pillars comes in three grille styles: Laser Cut Mesh B&O Unleashed OEM Style, Laser Cut Mesh B&O 8-Speaker and Non-Amplified OEM Style, or Laser Cut Mesh Open Design.

Do I need to send in my factory A-pillars as a core?

No — no core is required. We supply brand-new OEM pillars, complete with handles, for every build, so your truck stays whole while your kit is being made. The hand-crafted 3-way A-pillars arrive finished in your choice of Ebony (Black) or King Ranch (Java) to match your interior. Watch the video on this page for a closer look at the grille options.

Is an amplifier included with this kit?

No. This kit covers the speaker stage: the Gladen-Mosconi PRO Series drivers, the hand-crafted 3-way A-pillars, the custom speaker adapters, and the wiring and sealing touches listed in What's in the Box. It ships in the 3-Way Active configuration, which is designed to be driven by outboard amplification and DSP (sold separately). That makes it perfect for owners who want to upgrade in steps — start with the front stage now, then add amplification and the rest of the system when you're ready.

How involved is the installation?

It's built to be plug & play with no cutting of factory wiring. The 6.5-inch mid-bass drivers arrive pre-wired and mounted to our premium HDPE speaker adapters, every connection is soldered and heat-shrunk, and the harness ends in a pre-soldered OEM speaker connector that plugs straight into the factory plug. Closed-cell foam seals each speaker to the door panel, and two 12-inch square 3-layer sound treatment squares seal the adapters to the door metal for proper acoustical isolation. The A-pillars install in place of your factory pillars — no fabrication needed on your end.

What's the difference between the A-pillar grille options?

Three styles are available: Laser Cut Mesh B&O Unleashed OEM Style and Laser Cut Mesh B&O 8-Speaker and Non-Amplified OEM Style mimic the factory pillar look for their respective audio systems, and Laser Cut Mesh Open Design uses the mesh with a more open pattern.

How long until my kit ships?

The 3-way A-pillars and speaker adapters are hand-crafted in-house for your color and grille selection, so delivery lead times vary — contact us for current build times. When it does ship, everything is over-packaged to ensure safe arrival.

Gladen-Mosconi 9-Channel PICO Active Loaded Amplifier Rack

Asked on this part’s own page · for Ford 2023+ Super Duty and 2024+ F150 Trucks
7 questions
Will this amplifier rack fit my truck?

Select your truck at the top of the page to confirm the fit. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Can I buy this rack on its own?

It is sold as a system with front speakers. Choose your truck and your speakers in the builder on this page - our team tunes the rack in-house to those exact speakers before it ships, which is why it is not sold on its own. Already have our speakers from an earlier order? Call or text 615-610-1413.

Does this work with the B&O Unleashed factory system?

Yes. The rack includes the ZEN A2B High-Resolution B&O Integration Module for B&O trucks, and factory B&O customers also receive the Sub Block Off Plate. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Are speakers and subwoofers included?

No. This is a loaded amplifier rack - the amplifiers, DSP, harnesses, and wiring. The rack is sold as a system with our front speakers, which you choose in the builder on this page; a subwoofer enclosure is optional there. Our Stealth Behind the Seat Enclosures work with it as that optional subwoofer.

How much power does this system deliver?

1020 watts of RMS power total, from a Gladen-Mosconi PICO Series 8-channel amplifier with built-in DSP paired with a PICO Series 500W RMS mono-block amplifier.

Do I need to tune the system myself?

No. Every rack is pre-tuned, pre-wired, and tested in-house by our award-winning team before it ships, simplifying the most technical and challenging part of your upgrade.

How do I adjust the bass level?

The rack includes a Gladen-Mosconi RTC Remote Subwoofer Level Knob so you can adjust subwoofer level from the driver's seat.

"Stealth V2" Behind-the-Seat Loaded Sub Enclosure Only – 2024-2026 F-150 & Lightning, 2023-2026 Super Duty SuperCrew

Asked on this part’s own page
8 questions
Will I lose my rear seat or under-seat storage?

No. The seat still folds up and latches with the enclosure in place, and the storage under the seat stays: the subwoofers fire down, so the folded seat does not touch them. For the seat to latch, the carpet panel must be trimmed around the enclosure; then a firm push latches it.

Does it come with an amplifier?

No. This is the enclosure with its two subwoofers installed and wired, plus a plug-in lead for your own amplifier. If you want it amplified and tuned for you, the Behind-the-Seat Subwoofer Plug & Play System adds a pre-tuned Kicker KEY500.1 on our amp rack.

Which impedance should I choose?

The one your amplifier is built to drive at the power you want: 1 ohm, 2 ohms or 4 ohms. For example, an amplifier that makes its subwoofer power at 2 ohms takes the 2-ohm version; our own system runs the 1-ohm version on a Kicker KEY500.1. We wire it at our shop to the load you choose, so tell us your amplifier if you are unsure.

How much amplifier power does it need?

450 to 950 watts RMS to the pair. About 500 watts is the sweet spot: the subwoofers were made efficient on purpose, because there is little room behind the seat for a large amplifier.

Can I buy the enclosure empty and use my own subwoofers?

No. The enclosure always ships with its Ten87 Design subwoofers, because they were developed for its airspace — about 0.15 cubic feet per subwoofer, much less than most 6.5-inch subwoofers are designed for.

What else do I need on a truck with a B&O system?

The factory subwoofer comes out of the spot the enclosure takes, and its hole opens to the outside. Our B&O subwoofer block-off plate closes it; it is sold separately.

Does it work with Pro Power Onboard?

Yes. Every enclosure includes a 3D-printed grille for trucks with Pro Power Onboard: it replaces the under-seat inverter's vent tube to the rear pillar, so the enclosure fits behind the seat.

Will it fit my truck?

Select your truck in the vehicle selector at the top of the page; it checks this enclosure against your truck. Not sure? Call or text 615-610-1413.

Sound Treatment Package

Asked on this part’s own page · for 20212026 Ford F-150 & 2023-2026 Super Duty SuperCrew – Block Off Plates, Blackhole MAT & Tiles
10 questions
Which level should I choose?

Choose by the power on your door speakers. Level 1: factory power up to 65 watts RMS per channel. Level 2: 65-150 watts RMS per channel. Level 3: 150 watts RMS per channel and up. Not sure? Call or text 615.610.1413 with your amp and speakers.

What's the difference between the levels?

Every level has the same front and rear block off plates, the screws, and enough MAT for the back wall. Level 1: 6 boxes of Blackhole MAT (66 sq ft) and 18 tiles. Level 2: 5 boxes (55 sq ft) and 72 tiles. Level 3: 4 boxes (44 sq ft) and 144 tiles, 36 in every door. Tiles are the more effective way to control sound inside the door, so as the level goes up they take over the outer skin that Level 1 covers with MAT.

Does it cover the back wall?

Yes. Every level has enough MAT for the four doors and the big flat area of the back wall - about one box of MAT goes on the back wall. Save your offcuts for the plastic door panels so you don't run short.

Will it fit my truck?

Select your truck at the top of the page - the vehicle selector shows whether this kit fits it. The kit works with any factory audio system; there is no wiring. Not sure? Call or text 615.610.1413.

Do I have to drill?

Only for the block off plates: 1/8-inch pilot holes in the door's inner skin. The screws are included; the MAT and the tiles are self-adhesive.

What happens to the factory weather barrier?

It comes out and is not reused, along with any white sound-deadening material over the access hole. The block off plate covers that hole instead.

Do the speakers come out?

Yes. The speaker comes out so the tiles can go behind it - 4 x 7 mm screws on a front door, 3 on a rear door. Put the factory speaker back, or fit aftermarket speakers with a foam ring.

Where do the tiles go?

On the bare metal of the outer door skin inside the door, starting right behind the speaker. Flat surfaces only, about 1/8 to 1/4 inch between tiles so water can drain, and never cut a tile.

My door panel won't clip back on. What now?

Make sure the white sound-deadening material over the access hole is gone, and route the lock cable above the door pocket when you refit the panel. Still stuck? Call or text 615.610.1413.

What do I need that is not in the box?

Your tools: a panel removal tool, a 7 mm socket, a drill with a 1/8-inch bit, a utility knife, a roller, a tape measure, and wax and grease remover or alcohol with a rag. The kit does not include speakers.

Stealth Passenger-Side Loaded Behind-the-Seat Sub Enclosure, No Amp Rack – 2015-2023 F-150 & 2017-2022 Super Duty SuperCrew

Asked on this part’s own page
6 questions
How do I know it fits my truck?

Select your truck at the top of the page. If your truck is listed, this enclosure fits it; if not, call us and we will point you to the one that does.

Does this include an amplifier or amp rack?

No. You get the loaded enclosure and its XT90 lead. The amplifier, amp rack, power kit and harness are separate; our behind-the-seat subwoofer package bundles all of them. Recommended power: 500 W RMS.

Will I lose the use of my rear seat?

No. It mounts behind the seat, with no seat-forward kit or lift. The seat still folds and latches with the box in place once the carpet panel is cut and the box sits on all four feet.

Which impedance option should I choose?

The enclosure is offered in 1-ohm, 2-ohm, and 4-ohm final load configurations. Choose the final impedance that matches what your amplifier is rated to drive. If you are not sure which load your amp supports, contact us before ordering and we will help you pick.

What changes in the truck?

The rear carpet panel is cut, the factory subwoofer comes out (a truck with the oval factory sub needs a block-off plate for the opening), and the factory jack needs a new home. Power and ground runs depend on where your amplifier goes. Plan on about 2 hours.

Is the enclosure sealed or vented?

Ported (vented), built in-house. The subwoofers fire down toward the floor.

Gladen-Mosconi PRO Series Plug & Play 3-Way Speaker Kit Upgrade

Asked on this part’s own page · Designed for 2015-2020 F-150 and 2017-2022 SuperDuty
6 questions
Which Ford trucks does this kit fit?

Select your truck at the top of the page to confirm the fit. Pillar and door geometry change on the next generation, so we build a separate Gladen-Mosconi PRO Series kit for newer trucks; the selector routes you to the right one.

Does it matter whether my truck has B&O, Sony, or the base audio system?

All three are supported — B&O 8-Speaker, Sony Amplified, and Non-Amplified trucks are covered by this kit. Where your factory system matters is the A-pillar grille: the Laser Cut Mesh B&O 8-Speaker and Non-Amplified OEM Style option matches the factory look on those trims, or you can go with the Laser Cut Mesh Open Design. Watch the video on this page for a close look at each grille style.

What's actually in the kit — do I still need an amplifier?

This is the complete 3-way front stage: Gladen-Mosconi PRO Series 6.5-inch mid-bass, 3-inch mid-range, and 25mm tweeters, plus the custom work that makes it plug and play — Ten87 hand-crafted 3-way A-pillars, Ten87 Design custom speaker adapters with the speakers pre-wired and mounted, pre-soldered OEM connectors, closed-cell foam seals, and 3-layer sound treatment squares for the doors.

It does not include amplification — this kit ships in a 3-Way Active configuration, which is designed to be driven by a DSP amplifier. Most buyers pair it with one of our Gladen-Mosconi loaded amplifier racks for these trucks. That's by design: the kit is perfect for those who want to upgrade in steps.

Do I need to ship you my factory A-pillars first?

No core is required. We supply new Ford OEM pillars with grab handles for every build — your truck keeps its pillars until the day you swap them, and there's nothing to send in before or after. Each pair is hand-crafted with custom 3-way speaker mounts and finished in your selected interior color (Ebony, Gray w/Black Handle, or King Ranch Java) with your choice of grille style.

How involved is the installation?

This is one of the easier 3-way installs you'll find, because the fiddly work is done before it ships. The speakers arrive pre-wired and mounted to premium HDPE speaker adapters, connections are soldered and heat-shrunk, and the harness ends in a pre-soldered OEM speaker connector — a true no-cut installation, so your factory wiring stays intact. Closed-cell foam strips seal each speaker to the door panel and two 12-inch 3-layer sound treatment squares seal the adapters to the metal door, both included in the box. The A-pillars swap in place of your factory pillars.

How does the PRO Series compare to the Gladen-Mosconi RS Series kit?

The RS Series kit is our 2-way Gladen-Mosconi build — tweeter and door speaker. The PRO Series sits above it in the Gladen-Mosconi line and steps up to a full 3-way front stage: a dedicated 3-inch mid-range joins the 6.5-inch mid-bass and 25mm tweeter, mounted in hand-crafted 3-way A-pillars rather than the factory tweeter location. The mid-range is where vocals and instrument detail live, and putting it up on the pillar is what pulls the soundstage up onto the dash. If you're deciding between the two and want to talk it through, call or text 615.610.1413.

Don’t see your question? 615-610-1413 — a human will answer.

Install

What the install actually involves.

Fully plug-and-play behind-the-seat install — pre-tuned DSP, vehicle-specific harnessing, no cutting or splicing. Every component in this package ships together as one complete kit.

TimeA full day
DifficultyModerate
ReversibleYes — except treatment
Owner reviews · real installs

How it holds up once it’s in the truck.

Write a review
4.97/ 5
86 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your truck and how you listen — we'll walk you through the packages built for it and exactly what's in each one. No pressure, no upsell.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree — a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support