Ford B&O Subwoofer Harness – Add an Amp & Sub, Fix or Keep the Bass Roll-Off (2018-2026 F-150, Super Duty, Ranger)
Add a sub amp to Ford B&O — fix the bass roll-off with a pre-set KEYLOC, or keep it and save.
SKU: BO-PP-2021PlusFseriesULRCA-Key
Plug-in, by design.
Fix Roll-Off plugs in at the factory B&O amp and runs the front-door speaker signal through a Kicker KEYLOC we program before it ships. Your amp gets a steady signal, so the bass stays as you turn the volume up — no knob-chasing.
Keep Roll-Off plugs into the factory subwoofer's green plug and hands your amp the factory sub signal. It costs far less, but the factory roll-off stays: turn it up and the factory system pulls the bass back.
Either way, nothing is cut or spliced. Pick your truck at the top and we'll select the right version.
Check before you buy
On some newer trucks the factory amp sits on the passenger side — if your new amp mounts on the driver side, plan to extend the leads. 2026 Ranger or Maverick: Fix Roll-Off only. Not sure which system you have? Ask us before you buy.
Full specifications
- Factory Audio
- Ford B&O
- Connection Method
- No splicing
- Plug Location
- Amp or sub
- Signal Processor
- KEYLOC (Fix)
- Pre-Tuned Signal
- Yes (Fix)
- Output to Amp
- Low or high
- Turn-On Wire
- Fix only
- Sold As
- 1 kit
The rest of the route, in one cart.
One part from each DIY step that fits your vehicle. Open any of them to choose its options and add it to your cart without leaving this page.
Mounting amplifiers, a processor and distribution behind the driver-side rear seat: it bolts to three factory points, with no drilling.
Owners who need one compact amp or a DSP on the driver side without taking up the whole area behind the rear seat.
Owners running a 5-channel amp or micro amplifiers who want a clean, secure mount behind the rear seat.
Mounting a compact amplifier or processor behind the passenger-side rear seat, with no drilling and the factory subwoofer left in place.
2015-2026 Ford F-150 and Super Duty SuperCrew owners who want a hidden, clean amp install in the underseat storage area. Not for trucks with Pro Power Onboard.
For owners who need the whole back wall: 53.8 inches for several amplifiers, with room behind for distribution blocks, relays or a DSP.
20 ft of power + 20 ft of ground in 100% OFC Kicker wire, fused at the battery — 1/0, 4 or 8 gauge.
Owners of Ford, Mazda, and Lincoln vehicles upgrading factory 6.5-inch speakers to aftermarket drivers
2021+ Ford Bronco owners upgrading factory kick panel speakers to aftermarket 6.5-inch drivers
Owners of Ford, Lincoln, Mazda, and Mercury vehicles with factory 6x8-inch oval speakers upgrading to 6.5-inch round aftermarket drivers
Ford truck owners upgrading factory speakers to premium aftermarket 6.5-inch, 6x9-inch, or 8-inch drivers
F-150 and Super Duty owners installing aftermarket tweeters from a 2-way or 3-way component speaker kit
2021+ Ford truck owners with the non-amplified audio system installing aftermarket tweeters
2021+ Ford F-150, Lightning, and Super Duty owners with B&O audio upgrading factory midrange speakers
Closing the factory access holes behind your door speakers
Closing the factory access holes behind your door speakers
Trucks with B&O audio - required when removing the factory subwoofer
2009-2014 F-150 SuperCrew and SuperCab front door speaker upgrades
2015-2020 F-150 SuperCab and 2017-2022 Super Duty SuperCab door speaker upgrades
2018-2023 Ford Expedition and Expedition Max door speaker upgrades - all trims and audio packages
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat, with the compact amp rack that fits beside it. Bring your own amp.
Kicker's own carpeted truck box with two 10-inch L7T subs installed, made to sit under the rear seat.
Two 6.5-inch subs in a ported box behind the rear seat — for your own amp, and the seat still folds up.
Genuine JL Audio Stealthbox: two 12-inch TW3 subs in a sealed box that bolts in under the rear seat.
Two Ten87 Design 6.5-inch subs in a ported box that hides behind the rear seat. Bring your own amp.
Custom-fit subwoofer enclosure for the Ford F-Series (2009–2026) — tight, hidden bass built around your Arc Audio.
Everything customers actually ask.
The questions we get most on wiring and harnesses - answered straight. Not sure if yours is here? Call, and a human answers.
One year, on everything we sell. Every item is covered for one year from delivery. If something fails in that first year, we make it right. Questions about a claim? Call us — a real person handles it with you.
Asked by truck owners
5 answered by our teamGreat question. So in the 2019 Super Duty, you will see the B&O logo on the center channel speaker grille, but it's actually a Sony system. You can triple check this by checking out this video:
https://www.youtube.com/watch?v=B0gPDJBages
Answered by the SGS team · May 2024
The LC2 is a great product, just not the correct product for the B&O system. The KeyLOC has unique features that allows it to work with certain systems, like the B&O. It will resolve your bass roll off and yes, we pre-tune these in-house, in our truck before we ship them out.
Answered by the SGS team · Apr 2024
So the harness is pre-configured along with pre-tuned. Just plug it in at the amplifier, connect the power/ground/remote and run the RCAs to your new amplifier. No need to attach any additional wires or adjust anything.
Answered by the SGS team · Apr 2024
No, it does not effect any of the interior speakers volume or performance.
Answered by the SGS team · Mar 2024
The best option is to send it back to us and we can adjust it for you. A combination of test tools and know how is required to set these up properly.
Answered by the SGS team · Mar 2024
Step by step for your vehicle.
Where install steps exist for your exact part, they're below - with the tools you'll need.
-
Fix — Find the factory B&O amp: on older trucks it is on the driver side on a metal bracket (flip the rear seat down); on newer trucks it is behind the carpet, in the center or on the passenger side of the back wall.
-
Fix — Unplug the amp's center connector, plug in the T-harness, and plug the factory connector into the T-harness.
-
Fix — Plug the T-harness's Molex connector into the KEYLOC harness, and the KEYLOC harness into the KEYLOC.
-
Fix — Yellow to the same 12V constant as your amp (keep the 10 A fuse), black to the same ground as your amp — not the chassis — and blue/white to the amp's remote turn-on.
-
Fix — Leave the KEYLOC as shipped, with the Hi/Lo button pressed in.
-
Fix — Run the RCA cable from the KEYLOC's outputs to your amp's RCA input.
-
Keep — Flip down the rear seat.
-
Keep — Unplug the green factory plug at the factory subwoofer and plug in our harness.
-
Keep — Connect the RCA lead to your amp's high-level input, or cut the tips for speaker-wire inputs (striped lead is negative).
-
Both — Run your amp's power and ground from the front battery.
How they hold up once they're installed.
The keyloc is a must for 2024 F250 with 8 speaker B&O system. Completely plug and play, works perfectly with a Kicker hideaway HS12 behind the rear seat. This setup provided the exact amount of low end fill I was looking for in the rear of the cab.
Awesome! Completely fixed the lack of bass in the factory B&O Unleashed system. Was able to seamlessly add my subwoofer system with this product.
This setup made adding an amplifier to my 2026 F‑250 incredibly easy. The factory‑matched harness adapters were a huge win — true plug‑and‑play with zero cutting or splicing of factory wires. Tapping the door speakers and running that signal through the KeyLOC gives me a clean, strong output with absolutely no bass roll‑off, fixing the biggest flaw in the stock B&O system. The product arrived well‑packaged, and the online install videos made everything straightforward. Highly recommended.
Straight forward plug and play setup perfectly pre-tuned for sub amp. Doesn’t get any easier than that.
Had to recalibrate the keyloc once installed, and re tune the keyloc. Worked as should after this was done.
Originally I thought that I’d get away with only a powered Kicker subwoofer to satisfy my needs. After a couple months - yeah better but not great.
Added this ‘roll-off solution’ and have been impressed with the improved sound quality, noting that the music source mat’l makes a huge difference too. Going past 20 on volume, still sounds great.
Install was straight forward.
Just buy it. It’s worth every cent. If you think your sub in your ford sounds good you’re missing out. Plug and play couldn’t be any easier. Removed all roll off and replaced sound I didn’t know I was missing
Installation was a breeze with your harness. I merged it with the JL high/low harness and she fires right up. Just have to finish tucking wires under the bench area. Thanks for the great product and support!
Don’t waste your time and money trying to nickel and dime your project, these guys made it as easy as possible to add the bass that was lacking with the stock set up. I installed quite a few systems back in my “school days” but it’s just not the same anymore especially when keeping your stock set up on these new vehicles.. do yourself a favor and order this kit from these boys and be in and out in 2 hours (total install) everything was plug and play and sounds great. Safe your self the time and trouble.
If you’re looking for the EASIEST way to integrate an aftermarket amp & sub into your factory B&O system on a Ranger Raptor without hacking into any of the factory wiring, while keeping the rest of the system factory intact, than seriously look NO further! This kit is all you’ll need to accomplish that exact task. Plus, with the pre-programmed Kicker Keyloc it’s already dialed in to address the bass roll off issue that’s synonymous with the B&O system. Especially if you’re going the route of adding an amp & sub that issue will magnify itself. This pre-set Keyloc will take care of that and it’s already set up for the Ranger interior. If that's not a piece of cake install factor then I don’t know what is.
The added harness to tap into & between the factory amp wiring is every bit as well made as a factory Ford piece and the connectors look & feel like they came out of a Ford parts bin. Plus, it’s wrapped for abrasion protection.
Couldn’t ask for a better solution if you’re looking to jettison that weak 5 1/4” inch factory sub.
Installed the kicker keyloc on my ‘25 Ranger Raptor B&O system. Thank you for a great and easy to install, tech support was very helpful. Thanks again system sounds clean and powerful, JL 500w amp , Rockford T1S2-10 sub loaded into a Skar under seat box.
Harness works perfectly. For those trying to see it connects to the black connector on the other side of the green connectors, so you have to take apart the stock sub (see picture).
The pre-programmed Kicker KeyLOC and custom wire harness from Sounds Good made the installation of a powered sub in my 2025 Ranger Raptor very easy. Not having to go through the KeyLOC set up process or cutting factory wires makes this combo worth every penny. I would highly recommend this to anyone adding an aftermarket powered sub to a Ranger or Ranger Raptor.
The pre-configured Keyloc and T-harness combo made adding a better sub to the B&O Unleashed system in my 2022 F150. I think it was worth the extra cost to have the Keyloc arrive fully programed and ready to go. The T-harness really made installation easy. The only thing you have to figure out is where you want to mount the Keyloc. I attached mine to the B&O amp plate with a couple nutserts. Wire was perfect length to mount here, too.
The harness and KEYLOC worked exactly as described. I had a few questions pre and post install and the customer service is top notch! I will definitely be back for more products!
Installed in a 2019 raptor with B&O stereo. Wired it so that I can turn off the added subwoofers with a axillary switch but it can still run the factory subwoofer. The kicker KeyLoc works right out of the box and no adjustment needed. They do a great job adjusting at Soundsgood Stereo. Have installed the two 12" subs so that it is a quick disconnect and can install the self powered slim 12" sub without any trouble.
I love it when stuff works the way it's supposed to, like this harness adapter. Installed the behind the seat subwoofer enclosure with dual 6.5" subs and this adapter let.me go right from the factory box to the Kicker Key lock without having to do any wiring of any sort. Made installation a breeze and I have mega-bass now
If I keep the factory roll off. Will it still work with a powered sub like the kicker hs10
It will still work, just will roll off when you go above volume 14.
Not sure what'll fit? Just call.
Tell us your vehicle and factory system - we'll confirm the right harness before you order.

























