Loaded Amp Rack$1,640
Kicker amp rack for 2019+ GMC/Chevy Bose trucks with Focal module, braided power wiring and harness, angled view

Kicker Loaded Subwoofer 1800wrms Amplifier Rack for 2019+ GMC/Chevy BOSE Trucks

5.0 · 22 reviews
1,800 W RMS @ 2 ohmsPlugs into the Bose ampBolts to factory studsPre-tuned in-house

Kicker CXA1800.1 pre-wired and pre-tuned on our HDPE rack. Plugs into your factory Bose amp; you add the subwoofer.

$1,640
Shipping calculated at checkout
What's included
  • Kicker CXA1800.1 mono amplifier, mounted and wired on the rack
  • Ten87 Design half-inch HDPE amplifier rack
  • Plug-in GM Bose T-harness
  • 2-channel line output converter and LED-light relay, on the rack
  • Kicker remote bass knob
  • 4-gauge OFC copper power and ground wire
  • Inline MIDI fuse, already in the power wire
  • 2 watertight cable glands for the floor holes
  • Subwoofer lead with XT90 quick-disconnect
  • LED-light lead with XT60 quick-disconnect
  • Cable ties and tie mounts
or
Top questions 8 answered
See all 8 questions
Questions? Text us at 615-610-1413

SKU: PP-Loaded-CXA1800-GMC

Fits your vehicle In-house support
The rack · Performance tier

How it performs. In your truck.

Our score for this rack, and how it rates on the four things we judge every amplifier rack on.

Tier
Performance
Amplifier power
1800 W RMS
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Four things we rate

Hover or tap a measure
Loaded subwoofer amplifier rack

The details.

This rack is the amplifier half of a subwoofer upgrade for trucks with the factory Bose system. A Kicker CXA1800.1 comes mounted, wired and pre-tuned on our half-inch HDPE rack; it bolts to the factory studs on the rear cab wall and plugs in-line at the factory Bose amp, so no factory wires are cut. You add the subwoofer: 1,800 watts RMS into 2 ohms or 1 ohm, 900 into 4 (Kicker's ratings).

Full specifications

Amplifier System
CXA1800.1
RMS Power Output
1,800 W RMS
4-Ohm Output
900 W RMS
Factory Audio
Bose only
Factory Plug
T-harness
Pre-Tuned Signal
Yes
Power Wire
4 AWG OFC
Mounting
OEM studs
Loaded racks for your vehicle

Compare loaded subwoofer racks.

Common questions

Everything customers actually ask.

The questions we get most on loaded amplifier racks - answered straight. Not sure if yours is here? Call, and a human answers.

Don't see your question?
A human answers - no bots, no queues.
615-610-1413
Install it yourself

Step by step for your vehicle.

Where install steps exist for your exact part, they're below - with the tools you'll need.

DifficultyModerateTime~4 hrTools7 tools
Install walkthrough video — Kicker Loaded Subwoofer 1800wrms Amplifier Rack for 2019+ GMC/Chevy BOSE Trucks
Full walkthrough
How to Install a Loaded Subwoofer & Amp Rack | GMC Sierra / Chevy Silverado | Ten87 DesignInstall walkthrough.
Tools you'll need
10 mm socket with an extension (magnetic helps)
Right-angle hook tool
13 mm socket
3/4-inch step bit and drill
Flush cutters
Panel removal tool
Utility knife
Written steps
  1. Remove the three rear headrests and the six headrest retainers.

  2. Remove the four 10 mm bolts at the bottom of the seat back, release the three latches at the top with a hook tool, and lift the seat back out.

  3. Take the inverter and the parking-sensor module off the rear wall (10 mm nuts); they can stay plugged in.

  4. Slide the rack onto the factory studs, then mount the inverter and module back on top of it with the factory nuts.

  5. Unplug the top connector on the factory Bose amp and plug the T-harness in between.

  6. Connect the power wire to the 13 mm bolt beside the positive battery terminal and the ground to the negative terminal; the fuse is already inline in the power wire.

  7. Route both wires to the back of the cab and bring them in through two 3/4-inch holes in the floor on the passenger side, sealed with the included glands.

  8. Connect power and ground at the amp, plug in the subwoofer lead, and plug in the LED-light lead if your enclosure has LED lights.

  9. Mount the Kicker bass knob up front (most owners put it below the steering column) and run its cable to the rack.

  10. Test the system before the seat goes back in, trim the seat-back foam where it touches the amp, then reinstall the seat back.

Owner reviews - real installs

How they hold up once they're installed.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your vehicle and factory system - we'll confirm the right loaded rack before you order.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree - a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support
$1,640Loaded Subwoofer Amp Rack