Underseat Focal Flax EVO 9-Channel
Built per truck — select yours
Pre-tuned package family

Underseat Focal Flax EVO 9-Channel

We build this package per truck — the amp variant, the components and the price on this page follow the truck you choose.

From $13,382 Final price is your truck’s exact build — select your vehicle.
Talk to a builder · 615-610-1413
5.0★
22 reviews
Checking your vehicle…

Select your truck to see your exact package and price

These packages are built per truck — the components, the amp variant, and the price are specific to your exact vehicle. Tell us what you drive and this page shows the one build we ship for it.

Built for your exact truck Pre-tuned plug & play Hand-built in TN In-house support
The package · Performance tier

How it sounds. In your truck.

Here's what it's great at, what to know before you buy, and where it lands in our lineup.

Tier
Performance
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Seven things we listen for

Hover or tap a measure

Build your complete system.

Your system
The system builder
Build your complete system

Speakers, sub, amp and treatment, priced together.

01 SpeakersPick your truck
02 SubwooferFrom $849.99
03 Amp RackFrom $980
04 Sound TreatmentFrom $797
1 of 4 chosen
Build your system
How we build it

From your platform to your driveway.

Every package is engineered, hand-built, and tuned before it ever ships — so the install is the easy part. All done in-house in Mount Juliet.

STEP 01

Engineered for your platform

We design the whole system around your exact truck — sizes, power, enclosure volume, and fitment, worked out up front.

STEP 02

Hand-built in our shop

Enclosure cut, amp rack loaded and wired, harnesses made — built and inspected by our team in Mount Juliet.

STEP 03

Tuned inside your truck

We measure and tune the system in the real cab with reference gear, so it arrives set for that acoustic space.

STEP 04

Delivered plug-and-play

It ships dialed and labeled, with every part but the adhesive door treatment fully removable. Bolt it in, plug the harnesses, and play.

Straight answers

The questions we hear most.

The questions each component gets asked on its own page — grouped so you can read only the part you care about.

This package

2 questions
What’s included in this package?
  • Plug & Play Focal Flax EVO 3-Way Speaker Kit Upgrade Package
  • Gladen-Mosconi ONE 9-Channel Active Loaded Amplifier Rack
  • Sound Treatment Package
  • Custom Four Ten87 Design 6.5" Down-Firing Vented Subwoofer Enclosure
  • Choose Your Ford Level 5 Subwoofer Enclosure Insert
  • Gladen-Mosconi ONE Series 9-Channel Active Loaded Amplifier Rack
  • Plug & Play Focal Flax EVO 3-Way Speaker Kit Upgrade Package
  • Sound Treatment Package
Is an amplifier included?

Yes — this package includes its loaded amplifier rack:

  • Gladen-Mosconi ONE 9-Channel Active Loaded Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
  • Gladen-Mosconi ONE Series 9-Channel Active Loaded Amplifier Rack (All Factory Systems including B&O Unleashed)

Plug & Play Focal Flax EVO 3-Way Speaker Kit Upgrade Package

Asked on this part’s own page · for 2021+ F150 and 2023+ SuperDuty Ford Trucks
9 questions
Which trucks does this kit fit?

Select your truck in the vehicle selector at the top of the page: it checks your truck against our fitment list and tells you whether this kit fits. The kit works with B&O 8-Speaker, B&O Unleashed and non-amplified factory systems. If your truck takes our older-generation Flax EVO 3-way kit, the page takes you straight to it.

What speakers are in this kit?

The front stage is the Focal Flax EVO PS165F3E 3-way component set — the tweeters and midranges live in the Ten87 hand-crafted 3-way A-pillars, and the woofers mount in the doors on Ten87 Design custom-made speaker adapters. The rear doors get Focal Flax EVO PC165FE 2-way coaxials. Flax EVO is Focal's flax-cone line — rich, precise audio from a 3-way front stage with matching rear fill.

Can I buy just the front stage or just the rear speakers?

Kits are sold as the full front + rear set. Need just front or rear? Call or text us and we'll set it up.

Do I need to send in my factory A-pillars as a core?

No — no core is required. We supply brand-new OEM pillars, complete with handles, for every build, so your truck stays whole while your kit is being made. The hand-crafted 3-way A-pillars arrive finished in your choice of Ebony (Black) or King Ranch (Java) to match your interior.

What's the difference between the A-pillar grille options?

Three styles are available: Laser Cut Mesh — B&O Unleashed OEM Style and Laser Cut Mesh — B&O 8-Speaker and Non-Amplified OEM Style mimic the factory pillar look for their respective audio systems; and Laser Cut Mesh — Open Design uses the protective mesh with a more open pattern. The video on this page walks through each grille option in detail.

Is an amplifier included with this kit?

No. This kit covers the speaker stage: the Focal Flax EVO drivers, the hand-crafted 3-way A-pillars, the custom speaker adapters, and the wiring and sealing touches listed in What's in the Box. The pre-soldered OEM connector plugs straight into your factory speaker harness, and the package is built for owners who want to upgrade in steps — start with the speaker stage now, then add outboard amplification and processing when you're ready. Call or text 615.610.1413 and we'll help you plan the next step for your truck and budget.

Does my factory audio system matter?

Yes — the kit supports B&O 8-Speaker, B&O Unleashed, and Non-Amplified factory systems on the F-150, Lightning, and Super Duty (the Expedition fitment is for non-amplified trucks). Your factory system also determines which OEM-style grille matches your truck, so check which audio package you have before selecting options. Not sure what's in your truck? Text us at 615.610.1413 and we'll confirm before you order.

How invasive is the install? Does anything get cut?

Nothing gets cut. The harness ends in a pre-soldered OEM speaker connector that plugs into the factory plug, closed-cell foam strips seal each speaker to the door panel, and two 12-inch square 3-layer sound treatment squares seal the adapters to the door metal for proper acoustic isolation. The finished A-pillars install in place of your factory pillars — no fabrication needed on your end.

How long until my kit ships?

The 3-way A-pillars are hand-crafted in-house for your color and grille selection, so delivery lead times vary — contact us for current build times. When it does ship, everything is over-packaged to ensure safe arrival.

Gladen-Mosconi ONE 9-Channel Active Loaded Amplifier Rack

Asked on this part’s own page · for Ford 2023+ Super Duty and 2024+ F150 Trucks
6 questions
Can I buy this amp rack by itself, without speakers or subwoofers?

It is sold as a system with front speakers. Choose your truck and your speakers in the builder on this page - our team tunes the rack in-house to those exact speakers before it ships, which is why it is not sold on its own. Already have our speakers from an earlier order? Call or text 615-610-1413.

Which Ford trucks does this fit?

Select your truck at the top of the page to confirm the fit. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Does this work with the factory B&O and B&O Unleashed systems?

Yes. B&O trucks receive the ZEN A2B High-Resolution integration module, which handles factory system integration. Factory B&O customers also receive a Sub Block Off Plate. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

What does "9-channel active" mean?

The rack carries two Gladen-Mosconi ONE Series amplifiers: an 8-channel amplifier with built-in DSP plus a mono-block subwoofer amplifier, for 9 channels and 1720 watts RMS total. Active means the DSP handles the signal processing, and our team tunes it in-house to match the specific speakers and subwoofers in your package.

Is this tuned before it ships?

Yes. Every rack is pre-wired, pre-tuned, and tested in-house by the Sounds Good Stereo team before it leaves our shop. That is also why it has to ship with a full package - the extensive tuning is built around your exact equipment.

What is included for the installation?

Everything ships to your door: the loaded amplifier rack, a vehicle-specific plug-and-play T-harness, a full-length 1/0ga OFC copper power and ground wiring kit, a subwoofer harness with quick-disconnect connectors, and the RTC remote subwoofer level knob.

Sound Treatment Package

Asked on this part’s own page · for 20212026 Ford F-150 & 2023-2026 Super Duty SuperCrew – Block Off Plates, Blackhole MAT & Tiles
10 questions
Which level should I choose?

Choose by the power on your door speakers. Level 1: factory power up to 65 watts RMS per channel. Level 2: 65-150 watts RMS per channel. Level 3: 150 watts RMS per channel and up. Not sure? Call or text 615.610.1413 with your amp and speakers.

What's the difference between the levels?

Every level has the same front and rear block off plates, the screws, and enough MAT for the back wall. Level 1: 6 boxes of Blackhole MAT (66 sq ft) and 18 tiles. Level 2: 5 boxes (55 sq ft) and 72 tiles. Level 3: 4 boxes (44 sq ft) and 144 tiles, 36 in every door. Tiles are the more effective way to control sound inside the door, so as the level goes up they take over the outer skin that Level 1 covers with MAT.

Does it cover the back wall?

Yes. Every level has enough MAT for the four doors and the big flat area of the back wall - about one box of MAT goes on the back wall. Save your offcuts for the plastic door panels so you don't run short.

Will it fit my truck?

Select your truck at the top of the page - the vehicle selector shows whether this kit fits it. The kit works with any factory audio system; there is no wiring. Not sure? Call or text 615.610.1413.

Do I have to drill?

Only for the block off plates: 1/8-inch pilot holes in the door's inner skin. The screws are included; the MAT and the tiles are self-adhesive.

What happens to the factory weather barrier?

It comes out and is not reused, along with any white sound-deadening material over the access hole. The block off plate covers that hole instead.

Do the speakers come out?

Yes. The speaker comes out so the tiles can go behind it - 4 x 7 mm screws on a front door, 3 on a rear door. Put the factory speaker back, or fit aftermarket speakers with a foam ring.

Where do the tiles go?

On the bare metal of the outer door skin inside the door, starting right behind the speaker. Flat surfaces only, about 1/8 to 1/4 inch between tiles so water can drain, and never cut a tile.

My door panel won't clip back on. What now?

Make sure the white sound-deadening material over the access hole is gone, and route the lock cable above the door pocket when you refit the panel. Still stuck? Call or text 615.610.1413.

What do I need that is not in the box?

Your tools: a panel removal tool, a 7 mm socket, a drill with a 1/8-inch bit, a utility knife, a roller, a tape measure, and wax and grease remover or alcohol with a rag. The kit does not include speakers.

Custom Four Ten87 Design 6.5" Down-Firing Vented Subwoofer Enclosure

Asked on this part’s own page · for 2009–2026 Ford FSeries SuperCrew Trucks
8 questions
Which subwoofers are inside?

Four Ten87 Design SUB6 6.5-inch subwoofers. Ten87 Design is our own subwoofer line, and the SUB6 was designed for our enclosures. They ship installed and wired to the impedance you choose.

Why four 6.5-inch subwoofers instead of 10s?

Space. Smaller subwoofers need less air, so the room under the rear seat can hold four of them in a vented (ported) enclosure; 10-inch subwoofers in the same space have to go in a sealed box. A vented box plays lower for the same amplifier power, so these four reach deeper bass than their size suggests.

Do I lose the storage under the rear seat?

Yes. The enclosure goes where the factory under-seat storage tray sits: the tray unbolts and the enclosure takes its place. No seat lift is needed. If you need to keep that storage, ask us about our behind-the-seat enclosure.

Which impedance should I choose?

The one your amplifier is built to drive: 1 ohm or 2 ohms. We wire the subwoofers at our shop to the load you choose, so pick it before you order. Not sure? Tell us your amplifier and we will match it.

How much power does it handle?

1,600 watts RMS for the four subwoofers together. Choose an amplifier that makes its power at the impedance you pick, 1 ohm or 2 ohms. Not sure? Tell us your amplifier and we will match it.

Does it come with an amplifier?

No. This is the loaded enclosure, with a harness to connect it to your amplifier. Use your own amplifier, or ask us about a loaded subwoofer amp rack to go with it.

Does it light up, and can I choose the emblem?

Yes. RGB lighting is included and is controlled from your phone, and you choose the emblem face as you build the enclosure on this page.

How does it compare with the two Focal Utopia M 10-inch enclosure?

They suit different listeners. The four 6.5s in their vented box give a little more low bass. The two Utopia M 10s, in a sealed box, are tighter and more detailed in the upper bass: a kick drum sounds like a kick drum. Call or text 615-610-1413 and we will help you choose.

Choose Your Ford Level 5 Subwoofer Enclosure Insert

Asked on this part’s own page
5 questions
Can I buy the insert on its own?

No. The insert is made to go with one of our Level 5 subwoofer enclosures, so order it together with the enclosure. You can also choose it as a step when you build the enclosure on its page.

Will it fit the enclosure I already have?

It fits Level 5 enclosures made after July 17, 2023. If yours is older, call or text 615-610-1413 and we will check it for you.

Can I get a custom emblem?

Yes. Choose "Custom - Contact us" and get in touch with your design idea; the custom price shows when you select it.

Does it light up?

Yes. RGB lighting is included, and you control the colors from your phone.

Which interior color should I choose?

Choose the same interior color as your enclosure, so the insert matches it.

Gladen-Mosconi ONE Series 9-Channel Active Loaded Amplifier Rack

Asked on this part’s own page · (All Factory Systems including B&O Unleashed)
10 questions
Will this amplifier rack work with my truck's factory audio system?

Yes — it supports all factory Ford systems, including B&O 8-Speaker, B&O Unleashed, Sony Amplified, and Non-Amplified setups. Select your truck at the top of the page to confirm the fit. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Can I purchase this rack by itself?

It is sold as a system with front speakers. Choose your truck and your speakers in the builder on this page - our team tunes the rack in-house to those exact speakers before it ships, which is why it is not sold on its own. Already have our speakers from an earlier order? Call or text 615-610-1413.

What amplifiers power this rack?

A Gladen-Mosconi ONE Series 8-channel amplifier with built-in DSP plus a ONE Series mono-block amplifier — 9 channels total delivering 1720 watts of RMS power, running a fully active system.

Does it arrive ready to install?

Yes. Every rack is pre-tuned, pre-wired, and tested in-house by our award-winning team, then over-packaged to ensure safe arrival. It includes everything, shipped to your door.

How does it connect to my truck's factory wiring?

Through a vehicle-specific plug-and-play T-harness. B&O-equipped trucks also use the included ZEN A2B High-Resolution B&O Integration Module, and the subwoofer harness uses quick-disconnect connectors for an easy installation.

How do I pick the right variant?

You do not choose one. Pick your truck on this page and the builder sets the rack to your truck's factory sound system. Not sure which system your truck has? Contact us and we will confirm it before you order.

What happens to my factory B&O subwoofer?

Factory B&O customers receive a Sub Block Off Plate with the rack, and the included subwoofer harness with quick-disconnect connectors handles the new subwoofer wiring.

Where does the rack mount, and do I have to drill?

It is built on our driver-side amplifier rack, which mounts behind the rear seat on the seat-latch bolt and factory threaded holes in the floor, so the rack itself needs no drilling. A factory subwoofer in that spot comes out first.

The power cable kit includes two grommets (IP68 cable glands). They are required, and they seal the holes you drill to bring the power wire into the cab. The mounting feet chart on this page shows where the floor brackets go for each truck.

Does it come with any install tools?

Yes. Every rack ships with our package tool kit, including a pry bar, small flush cutters and foam circles.

What is the difference between the 7- and 9-channel ONE racks?

Both use the same two amplifiers: a Gladen-Mosconi ONE 8|10 DSP and a ONE 1|1000 mono-block for the subwoofer. The 7-channel rack runs an active 2-way front stage on six of the 8|10's channels; the 9-channel rack runs an active 3-way front stage on all eight.

Don’t see your question? 615-610-1413 — a human will answer.

Install

What the install actually involves.

Fully plug-and-play underseat install — pre-tuned DSP, vehicle-specific harnessing, no cutting or splicing. Every component in this package ships together as one complete kit.

TimeA full day
DifficultyModerate
ReversibleYes — except treatment
Owner reviews · real installs

How it holds up once it’s in the truck.

Write a review
5.0/ 5
22 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your truck and how you listen — we'll walk you through the packages built for it and exactly what's in each one. No pressure, no upsell.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree — a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support