Behind-the-Seat JL Audio VXi Series 5-Channel
Built per truck — select yours
Pre-tuned package family

Behind-the-Seat JL Audio VXi Series 5-Channel

We build this package per truck — the amp variant, the components and the price on this page follow the truck you choose.

From $6,769 Final price is your truck’s exact build — select your vehicle.
Talk to a builder · 615-610-1413
4.97★
86 reviews
Checking your vehicle…

Select your truck to see your exact package and price

These packages are built per truck — the components, the amp variant, and the price are specific to your exact vehicle. Tell us what you drive and this page shows the one build we ship for it.

Built for your exact truck Pre-tuned plug & play Hand-built in TN In-house support
The package · Performance tier

How it sounds. In your truck.

Here's what it's great at, what to know before you buy, and where it lands in our lineup.

Tier
Performance
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Seven things we listen for

Hover or tap a measure

Build your complete system.

Your system
The system builder
Build your complete system

Speakers, sub, amp and treatment, priced together.

01 SpeakersPick your truck
02 SubwooferFrom $849.99
03 Amp RackFrom $980
04 Sound TreatmentFrom $797
1 of 4 chosen
Build your system
How we build it

From your platform to your driveway.

Every package is engineered, hand-built, and tuned before it ever ships — so the install is the easy part. All done in-house in Mount Juliet.

STEP 01

Engineered for your platform

We design the whole system around your exact truck — sizes, power, enclosure volume, and fitment, worked out up front.

STEP 02

Hand-built in our shop

Enclosure cut, amp rack loaded and wired, harnesses made — built and inspected by our team in Mount Juliet.

STEP 03

Tuned inside your truck

We measure and tune the system in the real cab with reference gear, so it arrives set for that acoustic space.

STEP 04

Delivered plug-and-play

It ships dialed and labeled, with every part but the adhesive door treatment fully removable. Bolt it in, plug the harnesses, and play.

Straight answers

The questions we hear most.

The questions each component gets asked on its own page — grouped so you can read only the part you care about.

This package

2 questions
What’s included in this package?
  • JL Audio C1 Plug & Play Speaker Kit Upgrade
  • JL Audio VXI 2-Way 5-channel Loaded Amplifier Rack
  • "Stealth V2" Behind-the-Seat Loaded Sub Enclosure Only – 2024-2026 F-150 & Lightning, 2023-2026 Super Duty SuperCrew
  • Sound Treatment Package
Is an amplifier included?

Yes — this package includes its loaded amplifier rack:

  • JL Audio VXI 2-Way 5-channel Loaded Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks

JL Audio C1 Plug & Play Speaker Kit Upgrade

Asked on this part’s own page · Designed for 2015-2026 F-150 and 2017-2026 SuperDuty (FOR OUR PLUG & PLAY PACKAGES ONLY)
2 questions
Can I buy this version of the kit on its own?

No. This version of the JL Audio C1 kit is built for our builds with a loaded amp rack, and it is only sold as part of one.

To buy the C1 kit by itself, choose our stand-alone JL Audio C1 Plug & Play Speaker Kit.

How is it different from the stand-alone C1 kit?

The speakers and door parts are the same: JL Audio C1-690 6x9 two-way components and C1-650x 6.5-inch coaxials, mounted on our HDPE door adapters with plug-in speaker harnesses, plus 3D-printed tweeter adapters, closed-cell foam strips and mounting screws.

This version leaves out the stand-alone kit's tweeter harnesses with crossover capacitors and its Blackhole sound-treatment squares. The tweeters run on their own channels from the amp rack's processor, so the rack sets their crossover.

JL Audio VXI 2-Way 5-channel Loaded Amplifier Rack

Asked on this part’s own page · for Ford 2023+ Super Duty and 2024+ F150 Trucks
8 questions
Which trucks does this amplifier rack fit?

Select your truck at the top of the page to confirm the fit. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Can I buy this amplifier rack by itself?

It is sold as a system with front speakers. Choose your truck and your speakers in the builder on this page - our team tunes the rack in-house to those exact speakers before it ships, which is why it is not sold on its own. Already have our speakers from an earlier order? Call or text 615-610-1413.

What amplifier powers this rack?

The rack is built around the JL Audio VX1000/5i 5-channel amplifier with built-in DSP, delivering 900 watts of RMS power that is actively tuned in-house by the Sounds Good Stereo team.

Does it work with my truck's factory B&O system?

Yes. B&O trucks use the included ZEN A2B High-Resolution B&O Integration Module, and factory B&O customers also receive the Sub Block Off Plate. You do not pick a variant: choose your truck on this page and the builder sets the rack to your truck's factory system.

Is the wiring included?

Yes — the kit includes a full-length power + ground 4ga OFC copper wiring kit, a vehicle-specific plug-and-play T-harness, and a subwoofer harness with quick-disconnect connectors. It includes everything, shipped to your door.

Is the system tuned before it ships?

Yes. Every rack is pre-wired, pre-tuned, and tested in-house by our award-winning team, then over-packaged to ensure safe arrival.

Does it work with SGS subwoofer enclosures?

Yes — it works with our Stealth Behind-the-Seat enclosures, and the included subwoofer harness uses quick-disconnect connectors for a clean hookup.

Where does this rack mount?

Behind the passenger rear seat, in the factory jack's spot. The top bracket goes behind the seat-latch bracket, not in front of it, and a floor spacer sits between the floor and each floor foot. The mounting feet chart in the install guide shows where the feet go for your truck.

"Stealth V2" Behind-the-Seat Loaded Sub Enclosure Only – 2024-2026 F-150 & Lightning, 2023-2026 Super Duty SuperCrew

Asked on this part’s own page
8 questions
Will I lose my rear seat or under-seat storage?

No. The seat still folds up and latches with the enclosure in place, and the storage under the seat stays: the subwoofers fire down, so the folded seat does not touch them. For the seat to latch, the carpet panel must be trimmed around the enclosure; then a firm push latches it.

Does it come with an amplifier?

No. This is the enclosure with its two subwoofers installed and wired, plus a plug-in lead for your own amplifier. If you want it amplified and tuned for you, the Behind-the-Seat Subwoofer Plug & Play System adds a pre-tuned Kicker KEY500.1 on our amp rack.

Which impedance should I choose?

The one your amplifier is built to drive at the power you want: 1 ohm, 2 ohms or 4 ohms. For example, an amplifier that makes its subwoofer power at 2 ohms takes the 2-ohm version; our own system runs the 1-ohm version on a Kicker KEY500.1. We wire it at our shop to the load you choose, so tell us your amplifier if you are unsure.

How much amplifier power does it need?

450 to 950 watts RMS to the pair. About 500 watts is the sweet spot: the subwoofers were made efficient on purpose, because there is little room behind the seat for a large amplifier.

Can I buy the enclosure empty and use my own subwoofers?

No. The enclosure always ships with its Ten87 Design subwoofers, because they were developed for its airspace — about 0.15 cubic feet per subwoofer, much less than most 6.5-inch subwoofers are designed for.

What else do I need on a truck with a B&O system?

The factory subwoofer comes out of the spot the enclosure takes, and its hole opens to the outside. Our B&O subwoofer block-off plate closes it; it is sold separately.

Does it work with Pro Power Onboard?

Yes. Every enclosure includes a 3D-printed grille for trucks with Pro Power Onboard: it replaces the under-seat inverter's vent tube to the rear pillar, so the enclosure fits behind the seat.

Will it fit my truck?

Select your truck in the vehicle selector at the top of the page; it checks this enclosure against your truck. Not sure? Call or text 615-610-1413.

Sound Treatment Package

Asked on this part’s own page · for 20212026 Ford F-150 & 2023-2026 Super Duty SuperCrew – Block Off Plates, Blackhole MAT & Tiles
10 questions
Which level should I choose?

Choose by the power on your door speakers. Level 1: factory power up to 65 watts RMS per channel. Level 2: 65-150 watts RMS per channel. Level 3: 150 watts RMS per channel and up. Not sure? Call or text 615.610.1413 with your amp and speakers.

What's the difference between the levels?

Every level has the same front and rear block off plates, the screws, and enough MAT for the back wall. Level 1: 6 boxes of Blackhole MAT (66 sq ft) and 18 tiles. Level 2: 5 boxes (55 sq ft) and 72 tiles. Level 3: 4 boxes (44 sq ft) and 144 tiles, 36 in every door. Tiles are the more effective way to control sound inside the door, so as the level goes up they take over the outer skin that Level 1 covers with MAT.

Does it cover the back wall?

Yes. Every level has enough MAT for the four doors and the big flat area of the back wall - about one box of MAT goes on the back wall. Save your offcuts for the plastic door panels so you don't run short.

Will it fit my truck?

Select your truck at the top of the page - the vehicle selector shows whether this kit fits it. The kit works with any factory audio system; there is no wiring. Not sure? Call or text 615.610.1413.

Do I have to drill?

Only for the block off plates: 1/8-inch pilot holes in the door's inner skin. The screws are included; the MAT and the tiles are self-adhesive.

What happens to the factory weather barrier?

It comes out and is not reused, along with any white sound-deadening material over the access hole. The block off plate covers that hole instead.

Do the speakers come out?

Yes. The speaker comes out so the tiles can go behind it - 4 x 7 mm screws on a front door, 3 on a rear door. Put the factory speaker back, or fit aftermarket speakers with a foam ring.

Where do the tiles go?

On the bare metal of the outer door skin inside the door, starting right behind the speaker. Flat surfaces only, about 1/8 to 1/4 inch between tiles so water can drain, and never cut a tile.

My door panel won't clip back on. What now?

Make sure the white sound-deadening material over the access hole is gone, and route the lock cable above the door pocket when you refit the panel. Still stuck? Call or text 615.610.1413.

What do I need that is not in the box?

Your tools: a panel removal tool, a 7 mm socket, a drill with a 1/8-inch bit, a utility knife, a roller, a tape measure, and wax and grease remover or alcohol with a rag. The kit does not include speakers.

Don’t see your question? 615-610-1413 — a human will answer.

Install

What the install actually involves.

Fully plug-and-play behind-the-seat install — pre-tuned DSP, vehicle-specific harnessing, no cutting or splicing. Every component in this package ships together as one complete kit.

TimeA full day
DifficultyModerate
ReversibleYes — except treatment
Owner reviews · real installs

How it holds up once it’s in the truck.

Write a review
4.97/ 5
86 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your truck and how you listen — we'll walk you through the packages built for it and exactly what's in each one. No pressure, no upsell.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree — a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support