Underseat Ten87 Design Quad 6.5-inch Hand-Crafted Subwoofer Package with Pre-Tuned Amplifier
Built per truck — select yours
Pre-tuned package family

Underseat Ten87 Design Quad 6.5-inch Hand-Crafted Subwoofer Package with Pre-Tuned Amplifier

We build this package per truck — the amp variant, the components and the price on this page follow the truck you choose.

From $4,459 Final price is your truck’s exact build — select your vehicle.
Talk to a builder · 615-610-1413
5.0★
28 reviews
Checking your vehicle…

Select your truck to see your exact package and price

These packages are built per truck — the components, the amp variant, and the price are specific to your exact vehicle. Tell us what you drive and this page shows the one build we ship for it.

Built for your exact truck Pre-tuned plug & play Hand-built in TN In-house support
The package · Performance tier

How it sounds. In your truck.

Here's what it's great at, what to know before you buy, and where it lands in our lineup.

Tier
Performance
Amplifier power
1,500 W RMS
Where it lands in our lineup
  1. Essential
  2. Performance
  3. Audiophile
  4. Flagship

Four things we listen for

Hover or tap a measure

Build your complete system.

Your system
The system builder
Build your complete system

Enclosure, amp rack and treatment, priced together.

01 EnclosurePick your truck
02 SubwooferTo pick
03 Amp RackFrom $980
04 Sound TreatmentFrom $797
1 of 4 chosen
Build your system
Straight answers

The questions we hear most.

The questions each component gets asked on its own page — grouped so you can read only the part you care about.

This package

2 questions
What’s included in this package?
  • Choose Your Ford Level 5 Subwoofer Enclosure Insert
  • JL Audio Loaded Subwoofer 1500wrms Amplifier Rack
  • Custom Four Ten87 Design 6.5" Down-Firing Vented Subwoofer Enclosure
  • Sound Treatment Package
  • JL Audio Loaded Subwoofer 1500wrms Amplifier Rack
  • Sound Treatment Package
  • Arc Audio Loaded Subwoofer 1100wrms Amplifier Rack
Is an amplifier included?

Yes — this package includes its loaded amplifier rack:

  • JL Audio Loaded Subwoofer 1500wrms Amplifier Rack for Ford 2023+ Super Duty and 2024+ F-150 Trucks
  • JL Audio Loaded Subwoofer 1500wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)
  • Arc Audio Loaded Subwoofer 1100wrms Amplifier Rack for Ford F-Series Vehicles (All Factory Systems including B&O Unleashed)

Choose Your Ford Level 5 Subwoofer Enclosure Insert

Asked on this part’s own page
5 questions
Can I buy the insert on its own?

No. The insert is made to go with one of our Level 5 subwoofer enclosures, so order it together with the enclosure. You can also choose it as a step when you build the enclosure on its page.

Will it fit the enclosure I already have?

It fits Level 5 enclosures made after July 17, 2023. If yours is older, call or text 615-610-1413 and we will check it for you.

Can I get a custom emblem?

Yes. Choose "Custom - Contact us" and get in touch with your design idea; the custom price shows when you select it.

Does it light up?

Yes. RGB lighting is included, and you control the colors from your phone.

Which interior color should I choose?

Choose the same interior color as your enclosure, so the insert matches it.

JL Audio Loaded Subwoofer 1500wrms Amplifier Rack

Asked on this part’s own page · for Ford 2023+ Super Duty and 2024+ F150 Trucks
9 questions
Does this include a subwoofer?

No. This is the amplifier rack; you add the subwoofer and enclosure, and most owners pair it with one of our under-seat enclosures. The RD1500/1 makes the same 1,500 watts RMS into 2 ohms as into 1 ohm, so we recommend a 2-ohm final load: less stress on the amp. Into 4 ohms it makes 750 watts (JL's ratings at 14.4 volts).

Where does it plug in?

On B&O trucks the T-harness plugs in between the factory amplifier and its connector, male to female. That amp is hidden behind the carpet panel on the back wall, toward the passenger side. On trucks without B&O a plug goes in at the radio and an extension harness runs back to the rack. No factory wires are cut, and your door and dash speakers stay as they are.

Does it fix the B&O bass roll-off?

Yes. As you turn a factory B&O system up, it turns the subwoofer signal down to protect the factory sub. The Kicker KEYLOC on this rack is programmed to correct for that, so the bass keeps up with the volume.

Is it tuned before it ships?

Yes. Every rack is tuned in-house before it ships, with test tools, not by ear. Leave the gain on the amp and the KEYLOC alone, and use the RBC-1 knob to turn the subwoofer up or down.

Does it need drilling?

Not for the rack. Its feet bolt into factory threads in the floor and its top bracket bolts to the seat-latch bracket. The power and ground wires are the exception: they run from the battery under the truck and come into the cab through two 3/4-inch holes in the floor, sealed with the two watertight glands in the box.

What is the red and black lead off the relay for?

It powers the LED lights in our subwoofer enclosures, switched on and off with the system by a relay on the rack. If your enclosure has no LED lights, leave it unconnected.

How long does the install take?

We don't offer installation. Everything is plug-and-play and comes with step-by-step install videos; most customers install it themselves or use a local car-audio shop. Call or text us with any install question.

Which option do I choose?

The one that matches your factory audio: B&O, B&O Unleashed, or no B&O. Then select your truck at the top of the page to confirm the fit. Not sure which system you have? Call or text 615-610-1413 and we will check it with you.

Is 4-gauge wire enough for 1,500 watts?

Yes, for this one amplifier. It draws up to about 150 amps and is fused at 150 A, and our 4-gauge OFC copper kit is sized for it. If you add more amplifiers later, step up to a bigger main power wire.

Custom Four Ten87 Design 6.5" Down-Firing Vented Subwoofer Enclosure

Asked on this part’s own page · for 2009–2026 Ford FSeries SuperCrew Trucks
8 questions
Which subwoofers are inside?

Four Ten87 Design SUB6 6.5-inch subwoofers. Ten87 Design is our own subwoofer line, and the SUB6 was designed for our enclosures. They ship installed and wired to the impedance you choose.

Why four 6.5-inch subwoofers instead of 10s?

Space. Smaller subwoofers need less air, so the room under the rear seat can hold four of them in a vented (ported) enclosure; 10-inch subwoofers in the same space have to go in a sealed box. A vented box plays lower for the same amplifier power, so these four reach deeper bass than their size suggests.

Do I lose the storage under the rear seat?

Yes. The enclosure goes where the factory under-seat storage tray sits: the tray unbolts and the enclosure takes its place. No seat lift is needed. If you need to keep that storage, ask us about our behind-the-seat enclosure.

Which impedance should I choose?

The one your amplifier is built to drive: 1 ohm or 2 ohms. We wire the subwoofers at our shop to the load you choose, so pick it before you order. Not sure? Tell us your amplifier and we will match it.

How much power does it handle?

1,600 watts RMS for the four subwoofers together. Choose an amplifier that makes its power at the impedance you pick, 1 ohm or 2 ohms. Not sure? Tell us your amplifier and we will match it.

Does it come with an amplifier?

No. This is the loaded enclosure, with a harness to connect it to your amplifier. Use your own amplifier, or ask us about a loaded subwoofer amp rack to go with it.

Does it light up, and can I choose the emblem?

Yes. RGB lighting is included and is controlled from your phone, and you choose the emblem face as you build the enclosure on this page.

How does it compare with the two Focal Utopia M 10-inch enclosure?

They suit different listeners. The four 6.5s in their vented box give a little more low bass. The two Utopia M 10s, in a sealed box, are tighter and more detailed in the upper bass: a kick drum sounds like a kick drum. Call or text 615-610-1413 and we will help you choose.

Sound Treatment Package

Asked on this part’s own page · for 20152020 Ford F-150 & 2017-2022 Super Duty SuperCrew – Block Off Plates, Blackhole MAT & Tiles
10 questions
Which level should I choose?

Choose by the power on your door speakers. Level 1: factory power up to 65 watts RMS per channel. Level 2: 65-150 watts RMS per channel. Level 3: 150 watts RMS per channel and up. Not sure? Call or text 615.610.1413 with your amp and speakers.

What's the difference between the levels?

Every level has the same front and rear block off plates, the screws, and enough MAT for the back wall. Level 1: 6 boxes of Blackhole MAT (66 sq ft) and 18 tiles. Level 2: 5 boxes (55 sq ft) and 72 tiles. Level 3: 4 boxes (44 sq ft) and 144 tiles. Tiles are the more effective way to control sound inside the door, so as the level goes up they take over the outer skin that Level 1 covers with MAT.

Does it cover the back wall?

Yes. Every level has enough MAT for the four doors and the big flat area of the back wall - about one box of MAT goes on the back wall. Save your offcuts for the plastic door panels so you don't run short.

Which trucks does this package fit?

Select your truck in the vehicle selector at the top of the page: it checks your truck against our fitment list and tells you whether this package fits. The Block Off Plates are model-specific, and the MAT and Tiles quantities are sized for your truck's doors and rear wall.

Do I have to drill?

Only for the block off plates: 1/8-inch pilot holes through the plate's pre-drilled holes into the door's inner skin. The screws are included; the MAT and the tiles are self-adhesive.

What happens to the factory plastic barrier?

The thin plastic barrier over the access hole comes off and is not reused. The block off plate covers that hole instead, over a layer of MAT.

Do the speakers come out?

Yes. The speaker comes out (7 mm screws) so the tiles can go behind it. Keep the factory speaker and its screws if you may go back to stock; aftermarket speakers get a foam gasket.

Where do the tiles go?

On the bare metal of the outer door skin inside the door, starting right behind the speaker. Flat surfaces only, about 1/8 to 1/4 inch between tiles so water can drain, and never cut a tile.

How long does the install take?

Plan about 5 hours for all four doors and the back wall. It is a moderate job: no wiring, but every door panel comes off.

What do I need that is not in the box?

Your tools: a panel removal tool, a 7 mm socket, a drill with a 1/8-inch bit, a pick tool, a utility knife, a roller, a tape measure, and wax and grease remover or alcohol with a rag. The kit does not include speakers.

Arc Audio Loaded Subwoofer 1100wrms Amplifier Rack

Asked on this part’s own page · for Ford FSeries Vehicles (All Factory Systems including B&O Unleashed)
7 questions
Will this work with my truck's factory radio?

Yes. There is an option for each factory system: B&O Unleashed, B&O, Sony amplified, and non-amplified radios. On B&O and non-amplified trucks a Kicker KEYLOC takes the factory signal; on Sony trucks a PAC amplifier interface does. Choose the option that matches your factory subwoofer and audio.

Which trucks does this fit?

Select your truck at the top of the page to confirm the fit, then choose the option that matches its factory audio. Not sure which system you have? Call or text 615-610-1413.

Does this include a subwoofer or enclosure?

No. This rack is designed to power your subwoofer and enclosure. Everything else is included - the Arc Audio X2 amplifier, KeyLOC integration, remote level control, wiring, harnesses, and the custom rack itself. Just add your subwoofer and enclosure.

How much power does it put out?

The Arc Audio X2 mono-block amplifier delivers 1100W RMS at a 1-ohm load and 600W RMS at a 2-ohm load.

Do I need to tune anything after installation?

No. Every rack is pre-wired, pre-tuned, and tested in-house by the Sounds Good Stereo team before it ships.

Is all the wiring included?

Yes. You get a vehicle-specific plug-and-play T-harness, a full-length 4ga OFC copper power and ground wiring kit, two fused distribution blocks with fuses, and a subwoofer harness with quick-disconnect connectors.

What is the Sub Block Off Plate and do I get one?

Customers who select an oval factory subwoofer option receive the Sub Block Off Plate included with their rack. Round-subwoofer and non-amplified configurations do not include it.

Don’t see your question? 615-610-1413 — a human will answer.

Owner reviews · real installs

How it holds up once it’s in the truck.

Write a review
5.0/ 5
28 reviews
Questions? Talk to us

Not sure what'll fit? Just call.

Tell us your truck and how you listen — we'll walk you through the packages built for it and exactly what's in each one. No pressure, no upsell.

Don
Senior build specialist
Talk to Don
Call or text
615-610-1413

No bots, no phone tree — a real builder picks up.

Shipping calculated at checkout Financing available Authorized online retailer In-house tech support