Behind-the-Seat >>> Subwoofer Plug & Play System with Sound Treatment

Are you looking for a well-engineered, great-performing enclosure that goes behind your rear seat in your F-Series? If so, you have come across the right solution. What makes this enclosure unique is that it allows full functionality of the rear seat, without touching your subwoofers when lifted in the upright position.

While you may think a larger subwoofer is better, you are half right. Larger subwoofers require larger enclosures if you want a high level of performance, without internal airspace, the low bass will fall on its face. Bigger is better, but what you mean to say, is Bigger the Enclosure the better, not subwoofer size.

So how are we able to squeeze out so much performance from small-diameter drivers? It's a mix of science and experience. The main benefit of our enclosure is its vented (Ported) design, this allows higher efficiency over a traditional sealed enclosure. Think turbocharger on an engine, the displacement of the engine might be smaller, but horsepower goes up. This vent we can manipulate to work with the acoustics of the truck, whereas a sealed enclosure, you have very limited ways to "tune" the output.

As you might know, we work with an amazing brand JL Audio that makes some pretty amazing shallow subwoofers. So why do we not utilize those drivers in our enclosures? Simply put, the vented design of our enclosure delivers better performance in this exact application. The second part, is if you face a subwoofer forward, it will touch the seat and damage the subwoofer, nobody wants that.

Hand-Crafted Enclosure Details:
 - Pre-loaded with Two 6.5-inch Subwoofers in our vented enclosure, pre-wired
 - Premium Materials (Premium MDF, High-Grade Carpet)
 - The only enclosure that honestly fits behind the seat without damage to the subwoofers that still delivers a high level of performance
 - Hand-made by our Award Winning Team

The Loaded Subwoofer Rack "Ingredients":

Electronics:
 - Kicker Key500.1 Mono-Block Subwoofer Amplifier
 - Kicker CXARC Remote Subwoofer Level Knob

Sound Treatment:
 - 6 Boxes (66 sqft) of 3-Layer CLD BlackHole MAT (All Doors + Rear Wall)
 - 18 BlackHole Acoustical Tiles

Custom Made In-House Components:
 - Ten87 Design Custom Made Amplifier Rack
 - Front and Rear Set of Block-off Plates
 - Vehicle Specific Plug and Play T-Harness
 - Full-length Power + Ground 8ga OFC Copper Wiring Kit
 - Subwoofer harness with quick disconnect connectors
 - Factory Subwoofer Block Off Plate

Additional Touches:
 - Tool Kit with helpful installation components
 - Pre-tuned and Tested In-House by the Sounds Good Stereo Team
 - Over-packaged to ensure safe arrival
 - Includes Free Shipping in the U.S.

Installation Video: