Ford F-150 & Super Duty Tweeter Adapters | Laser-Cut to Your Tweeter

Product Description
Fitment Guide

Every adapter is laser-cut from solid acrylic to the exact millimeter for your specific tweeter. Select your tweeter brand and model from the dropdown, or choose your cutout size in millimeters if you already know it. No measuring, no filing, no Dremel work - it drops in and fits perfectly.

Mounts in the factory tweeter location on the A-pillar using the factory screws. Your trim pieces reinstall over the adapter exactly as they came from the factory. Note: sizes over 47mm require slight trimming of the A-pillar backing - see product photos for details.

Sold as one pair. Tweeters not included. If you are not sure which size you need, select "Not Sure" and we will contact you before shipping to confirm the correct cutout for your tweeters.

Fitment Guide

5 stars: 65 (87%)
4 stars: 2 (3%)
3 stars: 4 (5%)
2 stars: 1 (1%)
1 star: 3 (4%)

Some of the reviews shown are from related products the merchant grouped with this one.

Perfect fit!

Super easy process. Sent tweeter specs, they matched them with 51mm adapters. Perfect fit! Very Nice quality! Made installing a breeze. Highly recommend.

Better than others

I bought these after trying a set from another maker. Those other ones were brittle and hard to drill screw holes in. These ones were pre-drilled and made of a non brittle material. Much much better. From now on, I’ll get all my brackets from sounds good.

Great Solution for Aftermarket Tweeters

These Tweeter mounts are a great solution to put aftermarket component speakers into your vehicle that uses factory component speakers. Just measure the tweeter body diameter, order the correct size, slip the tweeter through and mount them up. These worked perfectly in the A-pillars of my '19 F150 so I could run component front door and A-pillar speakers without having to do any wiring.

Perfection

These adapters are absolutely perfect, and they made my install so easy. I highly recommend these!

2017 Ford Mustang GT Coupe

For the most part they were just what I needed. Fitment was tight, with the help of the agent on the phone we were able to get the size fairly close. I had to take approximately another mm or two from the inner ring to slide the tweeter cup inside. What would be helpful is if the adapters came with bends at the connection locations. However, I'm fully aware every tweeter is different, smaller or larger so each application may vary. All in all they worked.

Fast shipping!,adapters work perfectly!

The adapters are nicely made. make it simple to put tweeters where the stock 3.25 inch stock speakers were. Thanks!

Perfect mounting of a custom speaker solution!

When installing speakers all over my expedition, I found certain speakers did not fit or accept the same size mounting even though they are advertised as the same "socket hole" -- 3 1/2 for instance. With SGS help I was able to overcome my front 2 corner speaker fitments and then with this product, I was able to fit my JL c7 3.5" center speaker with a PERFECT fit. I was so excited to see how well engineered the simple mount piece was -- and rigid! I was able to pop 4 screws and mount the speaker to the plastic piece SGS sent me and then put it into the center console space. It even aligned with the small helper pins to line it up with the factory screw holes and center the device perfectly as if it was OEM! I couldn't be more impressed! I am now looking at my rear mount speakers thinking I may pull the trigger again so I get everything just right. This needs to be advertised to those like me that a solution exists and it is not only affordable but well designed and executed! Thank you SGS one again!

Worked perfectly and was delivered in a timely manner.

Amazing and look great

By far the best tweeter adapter for jeep gladiators on the market!

Perfect tweeter adapters.

These guys are legit, and so are their products. I have built 2 vehicles with them, and I can’t wait to do a third. Tweeter adapters are a perfect fit, and pair great with the SGS tweeter harness for that factory look. Thank you Don, Sage, and the rest of the crew.

When you are good you’re just good!

These guys are doing big things and the help that this company was willing to provide and ensure I got my system close from as far away as I am is amazing! Don’t ever leave a review, the f-150 amp rack, wire harness and speaker adapters made it seem like I knew what I was doing! Great job SGS

2023 Ford Bronco

Perfect fit!!!!

Great fit and finish

Made fitting the tweeters a breeze. Mounted right in place nice and secure.

Perfect fit!

These are compatible with several Chrysler vehicles, not just jeeps. Can be used in Challengers, Chargers, Ram 1500, 2500, 3500. Can also be used in Rams equipped with Harmon Kardon system to mount Tweeters in the door location. These are quality acrylic adapters and I used them to mount JL c7-350cm speakers in the dash locations in my Ram 1500. Just be careful drilling the pilot holes, I used a bit one size to small and the adapter cracked putting the screws in.

Bronco Adaptors

Needed a proper upgrade so ordered the Focal K2's and then ordered the tweeter adaptors. Adaptors fit perfectly and the hole for the tweeter was spot on. Way better than the janky alternative Crutchfield suggested with a strap. Super fast shipping as well!

Midrange Speaker Adpaters

Another great product from a great company. These fit perfectly for jeep and mopar vehicle with midrange in the corners of the dash. I'm running focal components in the front stage. WOW. Made the install easy. All questions were answered va phone and email prior to shipping. Fast and speedy arrival of product. Thanks again to sales team for answering the phone and talking to me about my specific questions I had prior to order.

The tweeter adapters were perfect fit.

The tweeter adapters were a perfect fit and made the installation of the new tweeters easy.

These were perfect and made the tweeter instal

These were perfect and made the tweeter instal extremely easy.

What mm size tweeter bracket do I need for the pillar tweeter in 2016 f150. About to replace my factory tweeter w/the Pioneer ts-a301tw tweeter. Thank you for your response.

Sounds Good Stereo

Based on the info online, it looks like 43mm is the size you need.

91%

(1448)

(60)

(21)

(13)

(42)

1351

2023 F350 Lariat B&O unleashed

Found these for my 2023 F350 Lariat B&O unleashed system. Following the installation video with flawless fit. I don't think I could have achieved sucess without the video. Shipping and customer service (I did have to contact them) was superb, couldn't be better. After installation, I could clearly hear the improvement to my stock system. I now get to crank it up for Boston and U2 songs.

Works like a charm! Easy to install and well

Works like a charm! Easy to install and well worth the money.

Did not fit my 2026 1500 Denali as delivered.

Did not fit my 2026 1500 Denali without modification. Only 3 of the pre drilles holes lined up with the back wall studs. Centre of holes on the studs that didnt fit were out by min 1/4". Required a step drill to oversize the holes to get the rack to fit over the studs. Other than the holes being misaligned the amp rack is good. Nice size for amps and easy to drill and tap. Definately test fit before putting the amplifier rack together.

Holy smokes!

MAN i am glad i purchased this, i did not realize how much of a difference it would make in my signal strength compared to tapping into the rear speakers. I had to turn all my settings down after this install. And speaking of install, that was pretty easy too, maybe 30 mins start to finish.

Truly a plug and play system

Truly a plug and play system. All mounting hardware is included, no drilling no cutting etc. High quality components and excellent customer service!

It's incredibly an excellent prodxyt9

It is incredibly an excellent product, I recommend it 100%.

Fit perfectly as expected

Fit perfectly as expected. You'll save time and money with their amps racks and speaker adapters.

Customizable

While it didn’t fit the Stevens audio 6.5 the material was good enough to use a router to increase the cutout size with no issue.

In-House Experts

Hours Of Operation

Verified Solutions

Product Development

2015-2022 Ford F-150 & Super Duty Tweeter Adapters

Recently Viewed Products

Free Shipping

Financing Available

AUTHORIZED ONLINE RETAILER

IN-HOUSE TECH SUPPORT

Your cart

Let customers speak for us

trending

Popular Products

Customer & Wholesale Client Login