Audiocontrol

AudioControl HP Mono Subwoofer Amp w / Accubass LC-1.1500 Features Subwoofer amplifier with patented AccuBASS® 1500 watts @ 2 ohms 850 watts @ 4 ohms AccuBASS® Processing MILC™ Maximum Input Level Control (Patent Pending) GTO™ Signal Sense 24 dB/octave Linkwitz-Riley Alignment crossover Speaker level and preamp inputs Optional...

 Audiocontrol ACR-1 Dash Remote Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).Compatible withLC2iLC6iLC7iOverdrive PlusMatrix Plus6XSThe Epicenter®LC-4.800LC-6.1200Legacy products supportedLC6LC8Original Epicenter® (bypass not supported)Weights & DimensionsDimensions: 1.75”W...

AudioControl 8x10 Channel Matrix DSP Processor DM-810 Digital signal processor 8 input channels, 10 outputs All controls and adjustments accessable via PC, Android or iOS device (AudioControl's Smart-User DSP software included) Variable high- and low-pass filters (30–300 Hz, 24 dB/octave) Subsonic filter at 32 Hz AccuBASS circuitry for...

AudioControl Mono Subwoofer Amp 800W RMS at 2 Ohm LC-1.800 Overview amplifier with patented AccuBASS® 800 watts @ 2 Ohm 500 watts @ 4 Ohm AccuBASS® Processing MILC™ Maximum Input Level Control (patent pending) GTO™ Signal Sense 24 dB/octave Linkwitz-Riley Alignment crossover Speaker-level and preamp inputs Optional ACR-1...

AudioControl 6 / 5 / 4 / 3 Channel Amp with Matrix DSP D-6.1200 Overview Configurable as 6/5/4/3/2 channel amplifier with DSP processing Continous power all channels driven (RMS) at 14.4V 6 x 125W (4 Ohm) 6 x 200W (2 Ohm) 3 x 400W bridged (4 Ohm) Audio...

AudioControl High Resolution Bluetooth Audio Streamer and DSP Programmer AC-BT24 The AC-BT24 enables high definition Bluetooth® audio streaming (aptX HD support) and programming for AudioControl DSP products featuring the Option Port. Stream hires audio directly to the DM-810 and DM-608 DSP or the D-6.1200 DSP amplifier and program...

AudioControl Micro 300 Mono Full / Sub AccuBass ACM-1.300 Overview Mono subwoofer amplifier 175 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms) Class D amp technology Selectable low-pass filter (bypass, 80, 120 Hz at 12 dB/octave) Fixed subsonic filter (24 Hz)...

AudioControl High-Power Multi-Channel Amplifier w / AccuBASS LC-6.1200 Overview Configurable as 6/5/4/3/2 channel amplifier 6 x 200 watts @ 2 Ohm 6 x 125 watts @ 4 Ohm 400 watts @ 4 Ohm bridged AccuBASS® processing MILCTM maximum input level control (patent pending) GTOTM signal sense 3-way independent Linkwitz-Riley alignment crossovers...

The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers....

The AudioControl LC7i, six-channel active line converter, allows all music lovers, who want a great in-car audio experience, to keep their factory installed source unit and dramatically improve their system performance. The LC7i delivers amazing sound quality and fixes one of the biggest letdowns of today’s factory systems,...

AudioControl 4 / 3 / 2 Channel Matrix DSP Amplifier D-4.800 Configurable as 4/3/2 channel amplifier 4 x 200 watts @ 2 Ohms 4 x 125 watts @ 4 Ohms 400 watts @ 4 Ohms bridged AccuBASS® processing MILC™ maximum input level control (patent pending) GTO™ signal sense...

  Audiocontrol ACR-3 Dash RemoteAdd remote level control for your AudioControl processor or amplifier. This is the replacement remote for the LC8i, DQ-61, DQDX, and The Epicenter® Amplifiers. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations).Compatible with: LC8iDQ-61DQDXThe Epicenter® AmplifiersD-4.800D-6.1200DM-608DM-810Weights & DimensionsDimensions: 1.75”W...

AudioControl 4 / 3 / 2 Channel High-Power Amplifier LC-4.800 High-power Multi-channel Amplifier with Accubass®“Making Good Sound Great” is our passion at AudioControl and that legacy continues with the LC-4.800 multi-channel amplifier.This unique high power design features six active speaker level inputs with summing allowing you to interface...

AudioControl 5 Channel DSP Amplifier D-5.1300 Overview 5 Channel DSP Amplifier 125 watts into 4-channels RMS at 4-Ohm (200watts RMS X4 at 2-Ohm) and 500 watts into 1-channel at 2-Ohm  Delivers onboard DSP control of all amplified outputs and a pair of low-level outputs as well.  The DSP...

AudioControl Preamp / Equalizer and Subwoofer Crossover THREE.2 IN-Dash Equalizer/Crossover With Aux InputsIf you want great sound and love to “tweak” your system, then you will truly appreciate the AudioControl THREE.2.  Affectionately called the “EQ on steroids”, the THREE.2 is a high-end pre-amplifier that offers equalization and crossover...

AudioControl Load Generating Device & Signal Stabilizer (All Makes & Models) AC-LGD Overview All Makes & Models 2005-2015 Used in factory systems that mute or cause distortion when replacing OEM speakers Carefully selected resistors and a Zobel Network Designed to generate load and stabilize signal from the factory...

AudioControl 300 Watt Mono Amplifier Marine and All Weather ACX-300.1 Overview Mono Amplifier Marine and All Weather 300 Watts @ 2 Ohms or 175 Watts @ 4 Ohms selectable low/hi input stage with independent gain controls AccuBASS® low-pass/bypass 12dB/octave Linkwitz-Riley crossover GTO signal sensing circuitry

AudioControl 8 Ch Line Output Converter w / Aux Input LC8I Eight input and output channels – will accept 400 watt signals per channel  Compact design – 30% smaller chassis than original AudioControl LC8  Auxiliary input for easy interfacing of iPods or other portable audio devices  Multi-function dash...

AudioControl 6 Ch Line Output Converter w / Equalizer LCQ1 6 channel line output converter Designed to work with any factory stereo 6 high-level inputs 6 channel preamp level outputs Independent front, rear, and sub EQ controls AccuBASS signal processing 12 volt turn-on lead output (turns on amp...

AudioControl Weather Proof Bluetooth Audio Streamer ACX-BT1 Features High Definition Low-Latency Audio Streaming aptX HD Support 24 bit / 48 kHz Audio Streaming from Devices with aptX Codec IPX5 rated enclosure Built in fuse Specs Bluetooth: 4.1 Output: Dual Line Level RCA Signal to Noise Ratio: 95 dB...

AudioControl Active Line Output Converter LC1I Features Two channels of active speaker level inputs (up to 40V input handling) Two channels of line level inputs Load Selection Switch GTO Signal Sensing Ground Isolation Switch Compact design Specs Inputs Speaker Level Input: 1 (2 channels) Maximum Speaker Level Input:...

AudioControl Two Channel Converter with ACR-1 LC2IPRO Features Two channels of active speaker level inputs (up to 40V input handling) Fixed and variable outputs with discrete level controls AccuBASS® processing for correction of bass roll-off Load Selection Switch GTO Signal Sensing Ground Isolation Switch ACR-1 dash remote inluded...

AudioControl Remote for AudioControl Processors ACR2 Remote control assembly with 20' cable and mounting plate For use with following AudioControl products: LC7 DQL-8 LCQ-1 Epicenter Plus

AudioControl 20 Load Generating Device and Signal Stabilizer (Chrysler No Factory Amp) AC-LGD20 General Designed to generate a load on factory wiring when removing OEM speakers Newer Chrysler Vehicles Without a Factory Amplified System Maximum Input Voltage: 15 Vrms (50 watts) Input Impedance: 20 Ohms Sold in Pairs...

AudioControl 6 Channel OEM Processor (black) DQ-61/BLACK User-friendly signal delay enhances the acoustical alignment between the left and right channels plus the front and subwoofer channels Individual equalization controls for the front, rear and subwoofer channels for simple yet precise system tuning Six channels of active speaker level...

AudioControl 5 Channel Summing Amplifier LC-5.1300 Overview 5 Channel 125 watts into 4-channels RMS at 4-Ohm (200watts RMS X4 at 2-Ohm) and 500 watts into 1-channel at 2-Ohm With eight speaker level inputs  With selectable summing capability

AudioControl 300 Watt 4 CH Amplifier Marine and All Weather ACX-300.4 Overview Selectable low/hi input stage with independent gain controls.  Features AudioControl’s patented AccuBASS® circuitry Low-pass/bypass 12dB/octave Linkwitz-Riley crossover 300 Watts @ 2 Ohms or 175 Watts @ 4 Ohms 4/3/2-channel Marine and All Weather

AudioControl Bass Restoration Processor w / SPL / Volt Display EPICENTERINDASH In-dash bass processor/SPL meter Increases bass response from your system Para-BASS parametric bass EQ Speaker- and preamp-level inputs SPL meter displays sound pressure level or battery voltage Built-in microphone Switchable backlight illumination (red or blue) Frequency response:...

AudioControl Bass Restoration Processor (black) EPICENTER Digital bass restoration processor Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and...

AudioControl 6 Ch Line Out Converter w / Internal Summing LC6I Overview AudioControl continues to simplify OEM integration with the new LC6i Six Channel Line Output Converter with internal summing.  The LC6i is built on the same technology as its predecessor, the LC6.  The LC6i converts speaker level...

AudioControl Trunk Mount Equalizer and Preamp (black) EQL Overview The EQL works wonders with any 2 channel audio system From existing factory installed setups to custom audiophile-grade systems.  Level-matching circuitry allows connection to either preamp-level or speaker-level inputs.  The EQL also features thirteen-band, dual-bandwidth equalization and a Programmable...

AudioControl Signal Analyzer DM-RTA Five-in-one signal analyzing tool AudioControl's DM-RTA app for PC, Android, or iOS device included voltage meter (Vrms) SPL meter polarity checker oscilloscope Real-time analyzer (RTA)

AudioControl 6x8 Channel Matrix DSP Processor DM-608 Overview Digital signal processor 6 input channels, 8 outputs All controls and adjustments accessible via PC, Android or iOS device (AudioControl's Smart-User DSP software included) Variable high- and low-pass filters (30300 Hz, 24 dB/octave) Subsonic filter at 32 Hz AccuBASS circuitry...

AudioControl Micro 300 2-Channel Amplifier ACM-2.300 2-channel car amplifier 75 watts RMS x 2 at 4 ohms (150 watts RMS x 2 at 2 ohms) 300 watts RMS x 1 bridged at 4 ohms Class D amp technology Selectable high-pass filter (bypass, 80, 120 Hz at 12 dB/octave)...

AudioControl Micro 300 4-Channel Amplifier ACM-4.300 FOUR CHANNEL MICRO AMPLIFIERACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure...