Adaptadores de tweeter cortados con láser personalizados: compatibles con vehículos Toyota, Lexus y Subaru seleccionados

These guys are legit, and so are their products. I have built 2 vehicles with them, and I can’t wait to do a third. Tweeter adapters are a perfect fit, and pair great with the SGS tweeter harness for that factory look. Thank you Don, Sage, and the rest of the crew.

Even though I read the reviews and was aware of the cracking potential, i thought I was smarter. I used a threaded drillbit after pre-drilling and all was well. The second I went to install my mid-range....crack. i wound up buying some ABS from amazon and using these as a template then threw them away. I believe these are acrylic. Id scrap that idea and juat use HDPE or ABS, neither of those should crack.

Build quality and fitment was perfect, unfortunately the application failed.

The parts are immaculate. Fit and finish is exactly as described. The parts make integrating aftermarket pieces into your vehicle a breeze.

Fitment is dead on for the two front corner dash speakers with custom selection of the focal 3” k2s.
Passenger side k2 is tight but thats the speaker not the adaptor so had to mess with the wiring for fitment. Driver side is perfect drop in.

The adaptors as they stated does take patience when mounting the speakers to it. Just don't screw them straight in as the screws and holes are tight. You will crack the plastic! I cracked one and had to use epoxy glue to fix it. You have to screw the screws in a little at a time then back it out then a little more until they seat tightly against the speakers. I managed to do 3 before the 4th cracked on me. Like anything else don't rush and be patient.

Super easy process. Sent tweeter specs, they matched them with 51mm adapters. Perfect fit! Very Nice quality! Made installing a breeze. Highly recommend.

I bought these after trying a set from another maker. Those other ones were brittle and hard to drill screw holes in. These ones were pre-drilled and made of a non brittle material. Much much better. From now on, I’ll get all my brackets from sounds good.

Worked exactly as described! They know the F-150 platform very well!

Bought some jl c2 tweeters and these worked perfectly

Used these for the Kicker KS tweeters in my F-150 non-B&O. With the Kicker tweeter compression nuts furnished with the tweeters, they snugged right up and fit into place. Recommend using a dab of hot glue where the compression nut meets the adapter to prevent any loosening over time and vibration.

These Tweeter mounts are a great solution to put aftermarket component speakers into your vehicle that uses factory component speakers. Just measure the tweeter body diameter, order the correct size, slip the tweeter through and mount them up. These worked perfectly in the A-pillars of my '19 F150 so I could run component front door and A-pillar speakers without having to do any wiring.