-11%
Mosconi Pico 810 DSP Compact 8-channel Amplifier with Built-in DSP
Mosconi Pico 810 DSP Compact 8-channel Amplifier with Built-in DSP
Mosconi Pico 810 DSP Compact 8-channel Amplifier with Built-in DSP
Mosconi Pico 810 DSP Compact 8-channel Amplifier with Built-in DSP
Mosconi Pico 810 DSP Compact 8-channel Amplifier with Built-in DSP
Mosconi Pico 810 DSP Compact 8-channel Amplifier with Built-in DSP
Mosconi Pico 810 DSP Compact 8-channel Amplifier with Built-in DSP
Click to zoom in

Mosconi Pico 810 DSP Compact 8-channel Amplifier with Built-in DSP


Key Features:

Mosconi
PICO810DSP
8-channel Amplifier

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

This item is a "Package Only" Product

What does this mean? Well, not all products are for the average DIY installers. Without proper training on the product, the test equipment for accurate setup, we restrict the sale of certain products for the trained professionals.

Our team is dedicated to offer products that are designed to improve the performance of your system, but we have to set boundaries of the capabilities of not only DIY consumers, but also not all shops/retailers/installers have the proper capabilities/training to provide you the performance necessary for this product.

If you would like to experience this product, look into our Plug & Play Packages along with our bundles that we offer. These are packages are personally curated by our team and provide a high level of performance from this product. Any questions, please contact our team.

OVERVIEW MOSCONI PICO 8|10 DSP

Perfect OEM integration:

Powerful DSP amplifier optimized for factory radio use. Six analog inputs up to 30V, flexible routing, 3x input EQ and delay. With 4x50 watts + 4x 90 watts ideal for active and semi-active systems, as well as classic front+rear+sub application. With two digital inputs (SP-Dif and BT+) and two processed line outs ready for the future.

Transducerless High Speed PWM Amplifiers:

High efficiency PWM output stages with the fastest carrier frequency in the world today (>2MHz), enables HiRes audio transmission and the extremely small size. The modulation is done without DAC directly from the 96kHz TDM signal of the DSP, thus the noise floor is close to zero and THD+N ~0.02% / 1W.


INPUT:

  • 4x analog inputs balanced (High-Level) up to 30V.
  • 4x analog inputs switchable High-Level / Low-Level)
  • 1x digital input SP-Dif optical (8kHz - 96kHz sampling rate)
  • 1x Bluetooth port with SP-Dif - TTL (8kHz - 96kHz, e.g. for Mos_BTS Bluetooth streaming module)
  • 1x Bluetooth extended digital audio port (BT+)
    (flexible 8kHz - 384kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS96k BT streaming module or extended analog inputs)

DSP:

  • 912 MHz, 32-bit audio port, 64-bit core.
  • Double Precision 56Bit filter calculation.
  • 6144 SIMD instructions per sample at 48 kHz.
    ASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR.

CONTROL:

  • 1x USB Serial Data (connection PC / GUI)
  • 1x Remote Connector (connection for RCD, RC-Mini, RTC-Hub)
  • 2x Bluetooth control Port (connection MOS-BT3.0 (App control), RC-Can (CAN bus control)
  • 1x Remote Out, 1x Remote In, Auto-Remote with Highlevel connection.
  • Connections with MOLEX® plug contacts.
  • Very small size with low heat generation, best suited for installation behind cladding.

SOFTWARE:

  • 3x 9 band parametric input EQ (de-equalizing)
  • 6x input delay 0 - 3ms / 0.01ms (de-delay)
  • 10x input level control digital (signal conditioning)
  • Flexible mixer for signal routing
    (Side separated, can sum and subtract, 10 inputs to 4x2 output groups)
  • 6x 30 band or 4x30 band + 2x15 band group EQ
    (parametric, relative phase remains stable)
  • 10x 10 band output filters
  • HighPass / LowPass / HighShelf / LowShelf / Notch / Allpass 1st + 2nd order / Speaker-EQ)
  • 10x Speaker Delay 0 - 12ms, 0.01ms
  • 10x Speaker Phase switch.

TECHNICAL DATA MOSCONI PICO 8|10 DSP

OUTPUT POWER/OUTPUT SIDE:

  • Output power @ 4Ω:

    4x 50 watts (channel: 1-4) 3-ohm stable (not bridgeable!)

  • Output power @ 4Ω:

    4x 90 Watt (Channel: 5-8) 2-Ohm stable / bridgeable

  • Output power @ 4Ω:

    4x 50 Watt + 2x 240 Watt (bridged channel 5+6/7+8)

  • Line Out:

    2 x 2Vrms Line Out


SPECIFICATIONS:

  • Input voltage:

    0,3 - 15 V

  • Overall efficiency:

    >80%

  • Auto-On (only High Level):

    Off - BTL

  • Dimensions:

    150 x 160 x 46 mm

  • Weight:

    1050 Gramm

Read More
Read Less

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Your cart

×