BUY NOW, PAY LATER. Starting at 0% APR 
The KICKER® KM 12-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat.
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs.
- FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
*The KM 12-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details.
Specifications
| Thiele/Small Parameters |
 45KM124 T/S Parameters PDF |
| Woofer(in,mm) |
| 12, 30 |
| Impedance (OHMS) |
| 4 SVC |
| Peak Power (watts, per ANSI/CTA-2031-A) |
| 350 |
| Recommended Amplifier Power (watts RMS) |
| 175 |
| Sealed Enclosure Volume Min-Max(ft³, L) |
| 1.25-3.5, 25.4-99.1 |
| Vented Enclosure Volume Min-Max(ft³, L) |
| 1.75-2.25, 49.6-63.7 |
| Frequency Response(Hz) |
| 30-500 |
| Mounting Depth(in, cm) |
| 5.5, 13.9 |
| Hole Diameter(in, cm) |
| 11, 27.9 |
| Outer Diameter(in, cm) |
| 13, 32.95 |
| What's in the Box: |
| 1 - 12" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Read More
